FeS2−AuNPs Nanocomposite as Mimicking Enzyme for Constructing Signal‐off Sandwich‐type Electrochemical Immunosensor Based on Electroactive Nickel Hexacyanoferrate as Matrix

In this work, a novel sandwich‐type electrochemical immunosensor with electroactive nickel hexacyanoferrate nanoparticles (NiHCFNPs) as matrix was constructed for α‐fetoprotein (AFP) detection in a signal‐off manner by using FeS₂?AuNPs nanocomposite catalyzed insoluble precipitation to significantly inhibit the electrochemical signal. Initially, the NiHCFNPs with excellent electrochemical property was modified on the electrodeposited nano‐Au electrode to obtain a strong initial electrochemical signal. Subsequently, another nano‐Au layer was formed for immobilization of capture antibody (Ab₁). In the presence of target AFP, the prepared FeS₂?AuNPs‐Ab₂ bioconjugate could be specifically recognized and immobilized on electrode through the sandwich‐type immunoreaction. The FeS₂ with large specific surface areas were used as scaffolds to load abundant mimicking enzyme AuNPs. With the help of hydrogen peroxide (H₂O₂), FeS₂?AuNPs with peroxidase‐like activity accelerated the 4‐chloro‐1‐naphthol (4‐CN) oxidation with generation of insoluble precipitation on electrode, which would greatly hinder the electron transfer and thus caused the decrease of electrochemical signal for quantitative determination of AFP. This approach achieved a wide dynamic linear range from 0.0001 to 100 ng mL^?1 with an ultralow limit detection of 0.028 pg mL^?1. Especially, the proposed AFP immunosensor can be applied to detect human serum samples with satisfactory results, indicating a potential application in clinical monitoring of tumor biomarkers.     

BiOCl/蒙脱土复合光催化剂的制备及其光催化活性

为优化BiOCl光催化剂的结构,改善其对有机污染物的吸附性能,进而提高光催化反应活性,采用超声辅助化学沉淀法制备了BiOCl/蒙脱土(MMT)复合光催化剂,并考察了MMT质量分数(w(MMT))对复合光催化剂结构及光催化反应活性的影响。 X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、傅里叶红外光谱(FTIR)和紫外-可见漫反射光谱(DRS)等的表征结果表明,所得催化剂呈微球状结构,禁带宽度为3.24 eV。 随着w(MMT)的增加,催化剂的微球状结构逐渐被破坏,但带隙能未发生明显变化。 以8-羟基喹啉为目标物考察了复合催化剂的吸附及光催化反应活性。 结果表明,随着w(MMT)增加,催化剂对8-羟基喹啉的吸附和光催化氧化活性逐渐增加,这可归因于与MMT的复合增大了比表面积并降低了光生载流子复合效率。 当w(MMT)为15%时,催化剂的吸附及光催化性能达到最佳,光照50 min后,8-羟基喹啉的降解率达到85.6%,矿化率达到51.0%。 光生空穴和超氧自由基负离子为主要的氧化活性物种。 复合催化剂还可高效降解邻苯二酚和对氨基苯甲酸。 同时,复合光催化剂表现出较强的化学稳定性,表明其具有较强的实际应用价值,可用于处理含有机酚类污染物的工业废水。     

生物质在流化床中的空气-水蒸气气化研究

以流化床为反应器，对生物质的空气-水蒸气气化特性进行了研究。考察了一些主要参变量，如温度 (700 ℃～900 ℃)、水蒸气/生物质比(0～4.04)、空气当量比(0.19～0.27)以及生物质粒度(0.2 mm～0.9 mm)等对气化结果的影响。在实验研究的条件范围内，生物质产气率在1.43 m3/kg～2.57 m3/kg范围内变化，产气的低热值在6 741 kJ/m3～9 143 kJ/m3范围内变化。实验结果表明：较高的气化温度有利于氢的产生；但气化温度过高会使气体热值下降；与常规的空气气化相比，水蒸气的加入使生物质气化产气率显著提高，但水蒸气加入量过多使气化温度下降，产气率和产气热值降低；生物质颗粒粒度的大小对产气组分的分布和产气率均有影响，较小颗粒的生物质会产生较多的CH4、CO和较少的CO2。     

高效液相色谱法测定精对苯二甲酸中微量杂质

建立了高效液相色谱法（HPLC）同时测定精对-苯二甲酸（PTA）中微量杂质4-羧基苯甲醛（4-CBA）、对-甲基苯甲酸（P-TOL）和苯甲酸（C7H6O2）含量的方法。采用的色谱柱为Shim-PackWAX-1柱，流动相为0.1mol/L NH3H2PO4 6%CH3OH，(pH4.5)，检测波长为254nm。PTA中微量杂质4-CBA、P-TOL和C7H6O2的含量分别为0.59-235.20mg/kg、4.52-392.00mg/kg和0.28-24.55mg/kg时线性关系良好，其线性相关系数分别为0.9998、0.9997和0.9999。苯甲酸加样平均回收率99.03％，RSD0.37％。     

分子印迹技术制备石油有机硫组分固相萃取剂的研究

用分子印迹技术合成了对石油有机硫组分二苯并噻吩(Dibenzothiophene，DBT)具有高效选择性的分子模板聚合物(Molecularly Imprinted Polymer，MIP)，通过静态吸附的方法研究了不同功能单体和致孔剂及其用量对模板聚合物特异性识别能力的影响．实验表明，以4-乙烯基吡啶(4-VP)为功能单体，在甲苯溶剂中聚合得到的固相萃取剂对DBT具有较大的吸附富集能力和识别特性．其饱和吸附容量达到48．3mg／g．     

超细镍基催化剂上CH4-CO2重整反应的性能 Ⅱ.制备方法对催化性能及积碳性能的影响

采用溶胶－凝胶法和超临界干燥（ＳＣＤ）技术制备了超细二元ＮｉＯ－Ａｌ２Ｏ３和三元ＮｉＯ－Ｌａ２Ｏ３－Ａｌ２Ｏ３催化剂,并以浸渍超细氧化铝载体和普通氧化铝载体制得的二元和三元催化剂为对比,考察了不同制备方法对催化剂上ＣＨ４－ＣＯ２重整反应性能的影响。结果表明,超细催化剂表现出很高的高温催化活性、选择性和显著的抗积碳能力,即使不含助剂的超细二元催化剂也明显优于含镧助剂的负载三元催化剂,而含镧的超细三元     

以二甲亚砜水溶液为反应介质低温合成纳米级磷酸亚铁锂

采用二甲亚砜水溶液为反应介质, 在常压和108 ℃条件下, 经短时间的液相反应直接制备出橄榄石结构的纳米级LiFePO₄. IR分析表明, 液相法直接制得的LiFePO₄晶体结构中含有少量的Fe^3＋. 将液相直接制备的样品与少量葡萄糖混合后在600 ℃下焙烧3 h得到类球形的LiFePO₄/C材料. 电化学测试结果表明, 这种纳米级LiFePO₄/C材料在0.2 C 倍率下放电容量达到157.2 mAh/g, 并且具有较好的放电平台. 5 C和10 C放电容量仍能达到126.1和103.4 mAh/g, 且循环200次后容量没有明显衰减, 表现出优异的倍率放电特性和循环性能.     

新型磁性亲和吸附剂的制备及其在尿激酶纯化中的应用研究

合成了磁性聚乙烯醇和磁性聚甲基丙烯酸甲酯微球,并以它们为基质,用环氧氯丙烷、羰基二咪唑或溴化氰活化后,分别键合氨基乙酸、6-氨基己酸、乙二胺或己二胺为间隔臂,用1-乙基-3-(3-二甲基氨丙基)碳二亚胺盐酸盐或羰基二咪唑为偶联试剂,分别偶联对氨基苯甲脒、L-精氨酸甲酯、胍基乙酸或胍基己酸配体,合成了17种磁性亲和吸附剂,并用于尿激酶粗品的纯化.与前文制备的8种磁性亲和吸附剂作对照,研究了基质、活化试剂、间隔臂分子、偶联试剂及配体等因素对尿激酶纯化效果的影响.这些磁性亲和吸附剂在尿激酶的纯化中取得了较好的效果,大多数磁性亲和吸附剂的活性回收率在40%～70%之间,纯化倍数为15～40,吸附容量为0.08～0.2mg/mL.     

Oxidation of Styrene with Molecular Oxygen in Supercritical CO2

The oxidation of styrene with molecular oxygen catalyzed by PdCl2 CuCl2 has been investigated in supercritical CO2 with a batch reactor. The oxidative system of styrene contains four components at the beginning and seven components during the reaction. The critical temperature, critical pressure, and critical density at different conversions are determined by using a high-pressure view cell. The effect of phase behavior on the conversion and selectivity were studied. Experimental results showed that the critical parameters of the reaction mixture at fixed initial molar ratio changed with the conversion of reactant. The conversion of styrene reached maximum near the critical density of the reaction mixture. Product selectivity also varied with density of reaction mixture and could be tuned to some degree.     

Aptamer-based highly sensitive electrochemical detection of thrombin via the amplification of graphene

Herein, we successfully fabricated a highly sensitive label-free electrochemical aptasensor for thrombin based on the amplification of graphene (Gra). The excellent electrochemical probe of nickel hexacyanoferrate nanoparticles (NiHCFNPs) was introduced to form Nafion-Graphene-NiHCFNPs (Nf-Gra-NiHCFNPs) nanocomposites membrane on the gold electrode. The employment of graphene not only enhanced the surface area of the electrode with increased NiHCFNPs immobilization, but also improved the conductivity of the electrode, which further effectively improved the sensitivity of this proposed aptasensor. Subsequently, AuNPs layer was formed to immobilize the thrombin aptamer (TBA) and enhance the stability of the composite monolayer mentioned above. Then, thiol-modified TBA was assembled onto the AuNPs layer. Thereafter, hexanethiol (HT) was employed to block the possible remaining active sites. With the dual amplification of Gra and AuNPs, the resulting aptasensor exhibited good current response to target thrombin with a wide linear range extended from 1 pM to 80 nM (the detection limit was 0.3 pM). Additionally, the morphologies of bare Au substrate, nickel hexacyanoferrate nanoparticles (NiHCFNPs) and nanocomposites were successfully characterized by atomic force microscopy (AFM).