Composition-Tunable Antiperovskite CuxIn1−xNNi3 as Superior Electrocatalysts for the Hydrogen Evolution Reaction

A group of newly reported antiperovskite nitrides Cu_xIn_1−xNNi₃ (0≤x≤1) with tunable composition are employed as electrocatalysts for the hydrogen evolution reaction (HER). Cu_0.4In_0.6NNi₃ shows the highest intrinsic performance among all developed catalysts with an overpotential of merely 42 mV at 10 mA cm_geo⁻². Stability tests at a high current density of 100 mA cm_geo⁻² show its super-stable performance with only 7 mV increase in overpotential after more than 60 hours of measurement, surpassing commercial Pt/C (increase of 170 mV). By partial substitution, the derived antiperovskite nitride achieves a smaller kinetic barrier of water dissociation compared to the unsubstituted InNNi₃ and CuNNi₃, revealed by first-principle calculations. It is found that the partially substituted Cu_xIn_1−xNNi₃ possesses a thermal neutral and desirable Gibbs free energy of hydrogen for HER, ascribed to the tailoring of the energy of d-band center arose by the A-site (A=Cu or In) substitution and a resulting optimization of adsorbate interactions.     

基于正电荷和光热协同效应的新型半导体聚合物纳米抗菌材料

由于抗生素的不当使用和细菌多药耐药的出现, 迫切需要开发新的抗菌剂. 本文制备了具有光热转换性能的正电荷半导体高分子材料及具有协同抗菌活性的半导体聚合物纳米粒子(SP-PPh₃ NPs). SP-PPh₃ NPs的光热转化效率为43.8%. 带正电荷的SP-PPh₃ NPs可以附着在细菌上, 有助于将热量有效传递给细菌. 在热和正电荷的协同作用下, SP-PPh₃ NPs对革兰氏阴性大肠杆菌(E. coli)和革兰氏阳性金黄色葡萄球菌(S. aureus)均具有抗菌活性, 其对二者的体外抑菌率分别为99.9%和98.6%. 此外, SP-PPh₃ NPs具有良好的生物相容性, 对小鼠的主要器官几乎无副作用. 对细菌感染的小鼠皮肤伤口用SP-PPh₃ NPs治疗12 d后, 伤口可以很好地愈合.     

环境科学与工程专业物理化学课程教与学的探讨

物理化学的学习前提是具有良好的高等数学知识基础及较强的逻辑推理能力,因此物理化学普遍被视为最难学的化学学科。本文紧扣金课标准,以环境科学与工程类专业学生为授课对象,基于近年来作者在物理化学教学内容和方法方面的探索,分析物理化学中的教与学中存在的问题及解决方法。     

Theoretical investigations of spin-orbit coupling and intersystem crossing in reaction carbon dioxide activated by [Re(CO)2]+

In order to further explore the detailed reaction mechanism of carbon dioxide activated by [Re(CO)₂]⁺ complex, CCSD(T) methods was performed to determine related potential energy surface (PES). Crossing point is determined by using a partially optimized method. The result shows that larger spin-orbital coupling (155.37 cm⁻¹) and intersystem crossing probabilities in spin-forbidden region causes the electron to spin flip at the minimum energy crossing point and access to the lower singlet PES. Nonadiabatic rate constant k is estimated to be quite rapid, so transition state (¹TS1) is rate-controlled steps. In addition, the electronic structure of oxygen-atom transfer process is further analyzed by localized molecular orbital and Mayer bond order. The analysis finds that the form of main bonding orbital is the electron contribution from the p(O) in CO₂ to the empty d(Re) orbital.     

同位素稀释高效液相色谱-串联质谱法测定水体、底泥、鱼及虾中氯硝柳胺残留量

建立了水体、底泥、鱼体自然比例带皮肌肉和虾肌肉中氯硝柳胺(NIC)残留量测定的同位素稀释高效液相色谱-串联质谱(HPLC-MS/MS)法。水样经碱化后以乙酸乙酯提取,其他样品采用0.1%氨水乙腈提取,C_(18)粉进行样品净化。以乙腈-水为流动相,流速为0.3 mL/min,采用Thermo Hypersil Gold C_(18)(150 mm×2.1 mm,5μm)色谱柱进行分离,氯硝柳胺稳定同位素标记物(氯硝柳胺-~(13)C_6)为内标,选择反应监测(SRM)模式扫描,内标法定量。结果表明氯硝柳胺在0.2～200μg/L范围内呈良好线性关系,相关系数(r~2)不小于0.999 5。空白水样在2.5、25、250 ng/L加标水平下的平均回收率为90.5%～109%,相对标准偏差(RSD)为3.2%～11%,检出限(LOD)为1.0 ng/L,定量下限(LOQ)为2.5 ng/L;空白底泥、黄颡鱼自然比例带皮肌肉和克氏原螯虾肌肉在0.5、5.0、50μg/kg加标水平下的平均回收率分别为89.4%～113%、92.8%～110%和94.1%～107%,RSD分别为4.6%～12%、2.8%～11%和3.2%～9.3%,LOD均为0.2μg/kg,LOQ均为0.5μg/kg。该方法的灵敏度、准确度和选择性高,适用于实际水产养殖环境水体、底泥、鱼和虾中氯硝柳胺的残留分析。     

General Strategy for Synthesis of Ordered Pt3M Intermetallics with Ultrasmall Particle Size

Controllable synthesis of atomically ordered intermetallic nanoparticles (NPs) is crucial to obtain superior electrocatalytic performance for fuel cell reactions, but still remains arduous. Herein, we demonstrate a novel and general hydrogel‐freeze drying strategy for the synthesis of reduced graphene oxide (rGO) supported Pt₃M (M=Mn, Cr, Fe, Co, etc.) intermetallic NPs (Pt₃M/rGO‐HF) with ultrasmall particle size (about 3 nm) and dramatic monodispersity. The formation of hydrogel prevents the aggregation of graphene oxide and significantly promotes their excellent dispersion, while a freeze‐drying can retain the hydrogel derived three‐dimensionally (3D) porous structure and immobilize the metal precursors with defined atomic ratio on GO support during solvent sublimation, which is not afforded by traditional oven drying. The subsequent annealing process produces rGO supported ultrasmall ordered Pt₃M intermetallic NPs (≈3 nm) due to confinement effect of 3D porous structure. Such Pt₃M intermetallic NPs exhibit the smallest particle size among the reported ordered Pt‐based intermetallic catalysts. A detailed study of the synthesis of ordered intermetallic Pt₃Mn/rGO catalyst is provided as an example of a generally applicable method. This study provides an economical and scalable route for the controlled synthesis of Pt‐based intermetallic catalysts, which can pave a way for the commercialization of fuel cell technologies.     

Optimization of l‐arginine purification from Corynebacterium crenatum fermentation broth

l ‐Arginine has many special physiological and biochemical functions, with wide applications in the food and pharmaceutical industry. Few studies on the purification of l ‐arginine from fermentation broth have been conducted; however, none of them were systematic enough for industrial scale‐up. Therefore, it is necessary to develop a highly efficient and systematic process for the purification of l ‐arginine from fermentation broth. In this study, we screened out a cation exchange resin, D155, having high exchange capacity, high selectivity, and easy elution capacity, and analyzed its adsorption isotherm, thermodynamics, and kinetics using different models. Further, the process parameters of fixed‐bed ion exchange adsorption and elution were optimized, and the penetration curve during the operation was modeled. Based on the fixed‐bed ion‐exchange parameters, a 30‐column continuous ion‐exchange system was designed, and the flow velocity in each zone was optimized. Finally, to obtain a high purity of l ‐arginine, the purification tests were conducted using anion exchange resin 711, and an l ‐arginine yield of 99.1% and purity of 98.5% was obtained. This effective and economical method also provides a promising strategy for separation of other amino acids from the fermentation broth, which is of great significance to the l ‐arginine fermentation industry.     

聚合物热解法还原制备LiFePO4锂离子电池正极材料

应用聚丙烯酸盐热解还原法制备L iFePO4/C材料.经XRD和SEM分析,该材料具有橄榄石结构,结晶程度高,粒度分布均匀,粒径约100 nm.恒流充放电实验表明,该材料放电容量为138 mAh/g,循环性能良好.证实聚丙烯酸盐热解还原法是一种制备L iFePO4材料的新型实用方法.     

Improved Initial Charging Capacity of Na-poor Na0.44MnO2 via Chemical Presodiation Strategy for Low-cost Sodium-ion Batteries

Sodium-ion batteries(SIBs)are promising for grid-scale energy storage applications due to the natural abundance and low cost of sodium.Among various Na insertion cathode materials,Na0.44MnO2 has attracted the most attention because of its cost effectiveness and structural stability.However,the low initial charge capacity for Na-poor Na0.44MnO2 hinders its practical applications.Herein,we developed a facile chemical presodiated method using sodiated biphenly to transform Na-poor Na0.44MnO2 into Na-rich Na0.66MnO2.After presodiation,the initial charge capacity of Na0.44MnO2 is greatly enhanced from 56.5 mA·h/g to 115.7 mA·h/g at 0.1 C(1 C=121 mA/g)and the excellent cycling stability(the capacity retention of 94.1%over 200 cycles at 2 C)is achieved.This presodiation strategy would open a new avenue for promoting the practical applications of Na-poor cathode materials in sodium-ion batteries.     

AlGaN基宽禁带半导体光电材料与器件

AlGaN基材料是带隙可调的直接带隙宽禁带半导体材料,是制备紫外(UV)光电子器件的理想材料.经过数十年的研究,目前已经在异质衬底外延生长AlGaN基材料、高效掺杂等方面取得了巨大进展.以此为基础,AlGaN基紫外光电器件制备领域也得到长足发展.在本综述中,主要介绍了高质量AlGaN基材料的MOCVD外延生长方法、掺杂方法以及近年来在紫外发光、紫外探测器件方面取得的进展.