The 650-nm variable optical attenuator based on polymer/silica hybrid waveguide

Visible light variable optical attenuators(VOA) are essential devices in the application of channel power regulation and equalization in wavelength-division multiplexing cross-connect nodes in plastic optical fiber(POF) transmission systems.In this paper, a polymer/silica hybrid waveguide thermo–optic attenuator based on multimode interference(MMI) coupler is designed and fabricated to operate at 650 nm. The single-mode transmission condition, MMI coupler, and transition taper dimensions are optimized through the beam propagation method. Thermal analysis based on material properties provides the optimized heater placement angle. The fabricated VOA presents an attenuation of 26.5 dB with a 21-mW electrical input power at 650 nm. The rise time and fall time are 51.99 and 192 μs, respectively. The time–stability measurement results prove its working reliability.     

HIAF-BRing快脉冲二极磁铁磁场测量系统

介绍了强流重离子加速器装置HIAF(High Intensity heavy-ion Accelerator Facility)项目增强器BRing(Booster Ring)快脉冲二极磁铁的性能指标、测量要求和测量方法,描述了快脉冲二极磁铁稳态磁场测量系统及动态磁场测量系统的构成。在稳态磁场测量中,为提高积分磁场测量精度和测量效率,长线圈测量系统采用了on fly技术;在动态磁场测量中,研制了用于磁场延迟及磁场畸变测量的矩阵线圈。通过样机磁铁的测量,完成了测量系统的性能指标验证和磁铁的稳态磁场测量。实测结果表明,样机磁铁的设计和制造均达到了预期指标,并依据测量数据完成了磁铁的二次削斜。     

Tunable wavelength filters using polymer long-period waveguide gratings based on metal-cladding directly defined technique

In this work, long-period waveguide grating-based tunable wavelength filters using organic–inorganic grafting poly(methyl methacrylate)(PMMA) materials are designed and fabricated by metal-cladding directly defined technique.The thermal stabilities and optical properties of the organic–inorganic grafting PMMA core materials are analyzed. Structures and performance parameters of the waveguide gratings and self-electrode heaters are designed and simulated. The contrast of the filter is about 15 d B and the resonant wavelength can be tuned by different electric powers applied to the metal-cladding self-electrode heaters. The temperature sensitivity is 3.5 nm/℃ and the switching time is about 1 ms. The technique is very suitable for realizing the optoelectronic integrated wavelength-division-multiplexing systems.     

高亮度大功率半导体激光器光纤耦合模块

应用ZEMAX软件设计出高亮度大功率光纤耦合模块。采用16支输出功率12 W的单偏振态单边发射半导体激光器,耦合进芯径100 μm、数值孔径0.22的光纤中。模块输出功率达到189.4 W,耦合效率达到98.6%,亮度达到94.66 MW/cm²-str。通过SolidWorks软件优化得到新热沉结构,应用ANSYS软件进行热分析,结果表明新热沉结构最高温度为42.4℃,相比优化前温度降低1℃以上,得到良好散热结构模型。     

矿物基环境修复材料制备及应用的综合性实验设计

为促进“研学结合”,增强学生实际操作能力,依托于化学实验平台设计了“矿物基环境修复材料制备及应用”的化学综合实验。实验内容包括改性沸石材料的制备、表征和应用探索。实验由教师科研成果转化而成,已在本校环境化学综合实验课中进行教学实践,该实验可以使学生掌握文献调研、材料制备与表征、性能分析、数据处理等重要技能,锻炼学生综合实验设计和思维创新的能力,激发了学生探索环境修复材料前沿知识的兴趣。     

催化光度返滴定法测定微量锰的研究

本文研究了催化光度反滴定法测定微量锰的原理，找到最佳实验条件，确立了实验方法，测定波长６２２ｎｍ；反应时间１ｍｉｎ４０ｓ；活化剂ＮＴＡ用量０．６０ｍＬ，ＫＩＯ４与孔雀石绿用量比为１．００：０．３５，室温下滴定；用ｐＨ＝５．４的乙酸－乙酸钠缓冲溶液控制溶液酸度；测定Ｍｎ＾２＋的浓度范围为１×１０＾－７～１×１０＾－５ｍｏｌ／Ｌ，Ｃｏ＾２＋，Ｂｉ＾３＋，Ｃａ＾２＋，Ａｌ＾３＋，Ｐｂ＾２＋，Ｃｕ＾２＋，     

水平成层介质中粘弹性波的计算

本文提出了一种水平成层介质中弹性波粘弹性波计算的新方法，分别研究了线源和点源作用情况。该方法适用于各种粘弹性模型，数值计算简单，可模拟任意震源及所产生的各种体波，面波，数值结果表明具有很高的计算精度和计算效率。     

Construction and application of an electrochemical sensor based on graphene-MXene nanocomposites for baicalin detectionEI北大核心CSCD

Redox graphene-MXene(rGO-MXene) nanocomposites were prepared by ion polymerization and used to construct a highly sensitive electrochemical sensor for baicalin(BA) detection. The synergistic effect of rGO and MXene increased the specific surface area and electron transport capacity of the electrode, and significantly enhanced the electrochemical response of BA. The cyclic voltammetry and differential pulse voltammetry were used to investigate the electrochemical behavior of BA on the sensor. Under the optimal conditions, the peak current exhibited a good linear relationship with BA concentration in the range of 0. 05-10 μmol / L, and the limit of detection was as low as 28 nmol / L. The method was applied to analyze traditional Chinese medicine preparations containing baicalin, such as Qingkailing Capsule and Sanhuang Tablets with good accuracy and spiked recovery. The results were highly consistent with those of high performance liquid chromatography, providing a technical means for the rapid and sensitive detection of traditional Chinese medicine preparations. © 2022, Youke Publishing Co.,Ltd. All rights reserved.     

高效的基于傅里叶单像素成像的亚像素级边缘检测技术

针对无法实现先验的边缘检测场景,并解决边缘提取效率过低的问题,提出一种更高效的基于傅里叶单像素成像的亚像素级边缘检测方法。该方法结合快速傅里叶单像素成像,减少图像算法的相移步数,在原有四步相移的基础上分别实现了三步相移与两步相移边缘检测。该算法上的改进能够在同等采样数下扩大参与边缘提取的频谱宽度,从而提升边缘提取效率。数值仿真结果表明,与四步相移亚像素级边缘检测相比,无噪声条件下两步相移在655~13 100次左右的采样数区间内峰值信噪比增长幅度高出2.27 dB,噪声条件下低于0.054噪声浮动比率时两步相移方法可以获得比四步相移更高的边缘提取质量。该方法可以一定程度上提升边缘提取效率,同时促进单像素成像领域与图像处理方向的技术交叉和应用化发展。     

基于MZI结构的二氧化硅波导模式选择开关

设计并且制备了一种基于马赫-曾德尔干涉仪结构的二氧化硅波导模式选择开关。该器件由不对称定向耦合器及金属电极组成。通过金属电极产生的热场改变单模波导中的模式相位,实现了单模波导中E₀₀模式向多模波导中E₁₀模式的转换。器件采用标准CMOS工艺制备,在调制臂两侧引入空气槽,提高热场调制效率,降低开关功耗。实验结果表明,当输入E₀₀模式时,输出端的串扰小于-17.13 dB,消光比大于16.7 dB;当输入E₁₀模式时,输出端的串扰小于-19.84 dB,消光比大于22.5 dB。模式开关的上升时间和下降时间分别为0.7 ms和1 ms。该模式选择开关在模分复用系统中具有良好的应用前景。