Development of a China test cryomodule for ILC

Research and development of a 1.3 GHz 9-cell cavity test cryomodule were carried out by a collaboration group between IHEP (Institute of High Energy Physics) and TIPC (Technical Institute of Physics and Chemistry) in China. The cryomodule is a "test model" for the ILC cryomodule, and a key component of a superconducting accelerator test unit which will be built in the near future, also can be used as a horizontal test facility for 1.3~GHz 9-cell cavities. This paper presents the development status of the cryomodule, including structure design, cryogenic flow diagram, thermal and mechanical simulations, heat load estimation and etc.     

低温大试样热胀系数测试

本介绍了用熔融石英引伸法测量硬质材料热胀系数的简便装置,并给出了试样在液氦温区到室温的测量结果,数据的一致性以及与已有献数据比较取得了不错的结果．     

ZrO2∶Tb3+纳米晶的离子交换法制备及其发光特性

以强碱性阴离子交换树脂为交换介质,采用离子交换法制备了稀土Tb3+离子掺杂的ZrO2:Tb3+纳米晶.通过XRD,TG-DSC,TEM,HRTEM等手段分析了样品制备过程的物相变化及晶粒形貌,用荧光光度计研究了样品的三维荧光光谱、激发光谱和发射光谱.结果表明:前驱沉淀物经800℃焙烧处理2 h,制备出近方型形貌,颗粒分散性好、尺寸约为40 nm的四方相ZrO2:Tb3+纳米晶.当焙烧温度升高到900℃以上时样品出现了少量单斜晶相,而经800℃焙烧处理的纯Zr02是以四方相和单斜相同时存在.说明稀土Tb3+离子的掺杂对ZrO2基质的四方晶相起到稳定作用.由ZrO2:Tb3+)的等角三维荧光光谱图显示Tb3+在ZrO2基质中的最佳激发波长为290 nm:在290 nm波长光的激发下观察到纳米ZrO2中Tb3+的发射峰位于491,545,582 nm分别对应于Tb3+的5D4→7F6、5D4→7F5、5D4→7F4、5D4→7F4能级跃迁,以491,545nm的发射峰最强,其中经800℃焙烧处理的样品其5D4→7F6跃迁发射与5D4→7F5跃迁发射强度几乎相同,说明该法制备的纳米ZrO2:Tb3+中5D4→7F6跃迁发射增强,使Tb3+发光的蓝色成分增加了.     

Variational assimilation in combination with the regularization method for sea level pressure retrieval from QuikSCAT scatterometer data I: Theoretical frame construction

A new method of constructing a sea level pressure field from satellite microwave scatterometer measurements is presented. It is based on variational assimilation in combination with a regularization method using geostrophic vorticity to construct a sea level pressure field from scatterometer data that are given in this paper, which offers a new idea for the application of scatterometer measurements. Firstly, the geostrophic vorticity from the scatterometer data is computed to construct the observation field, and the vorticity field in an area and the sea level pressure on the borders are assimilated. Secondly, the gradient of sea level pressure (semi-norm) is used as the stable functional to educe the adjoint system, the adjoint boundary condition and the gradient of the cost functional in which a weight parameter is introduced for the harmony of the system and the Tikhonov regularization techniques in inverse problem are used to overcome the ill-posedness of the assimilation. Finally, the iteration method of the sea level pressure field is developed.     

退火处理对磁控溅射制备LaCoO_3薄膜性能的影响

采用磁控溅射法在硅衬底上制备了LaCoO_3(LCO)薄膜,研究了退火温度对LCO薄膜组织结构、表面形貌及热电特性的影响,并利用X射线衍射仪、原子力显微镜(AFM)、激光导热仪等对LCO薄膜的晶体结构、表面形貌、热扩散系数等进行测量与表征.结果表明:退火温度对LCO薄膜的结晶度、晶粒尺寸和薄膜表面形貌都有较大影响;退火前后LCO薄膜的热扩散系数都随温度的升高而减小,且变化速率逐渐减缓; LCO薄膜的热扩散系数随退化温度的升高先增大后减小.LCO薄膜经过700℃退火后得到最佳的综合性能,其薄膜表面致密、平整,结晶质量最好,热扩散系数最小,热电性能最好.     

硒化锑薄膜太阳电池的模拟与结构优化研究

采用wx-AMPS模拟软件对硒化锑(Sb_2Se_3)薄膜太阳电池进行建模仿真,将CdS, ZnO和Sn02的模型应用到Sb_2Se_3太阳电池的电子传输层中.结果显示,应用CdS和ZnO都能实现较高的器件性能,并发现电子传输层电子亲和势(Xe-ETL)的变化能够调节Sb_2Se_3太阳电池内部的电场分布,是影响器件性能的关键参数之一.过高或者过低的Xe-ETL都会使电池的填充因子降低,导致电池性能劣化.当Xe-ETL为4.2eV时,厚度为0.6μm的Sb_2Se_3太阳电池取得了最优的7.87%的转换效率.应用优化好的器件模型,在不考虑Sb_2Se_3层缺陷态的理想情况下,厚度为3μm的Sb_2Se_3太阳电池的转换效率可以达到16.55%(短路电流密度J_(SC)=34.88 mA/cm~2、开路电压V_(OC)=0.59 V、填充因子FF=80.40%).以上模拟结果表明,Sb_2Se_3薄膜太阳电池在简单的器件结构下就能够获得优异的光电性能,具有较高的应用潜力.     

高超声速可压缩流中粗糙壁热流研究

用计算流体力学（CFD）数值模拟和理论方法对高超声速可压缩湍流中粗糙壁面热增量进行研究. 着重考虑粗糙单元密度和粗糙单元形状对粗糙表面热流的影响. 结果表明： ①粗糙单元密度变化时, CFD数值方法计算所得的粗糙单元等效热流随着粗糙单元密度的降低而增加, 理论方法预测结果的规律随方法不同而不同;②在相同粗糙单元密度和高度时,如果粗糙单元形状改变,CFD计算结果也随之发生改变. 理论预测方法所得结果不发生变化.     

可重复使用运载器大姿态机动自抗扰控制

针对可重复使用运载器大俯仰角或偏航角转弯机动而产生的姿态角奇异的控制问题,提出了基于四元数的自抗扰控制方法。通过两级跟踪微分器从期望四元数中逐步得到三通道解耦的角加速度信号,然后利用扩张状态观测器观测模型中的不确定项,最终采用动态逆得到解耦的三通道发动机等效摆角或RCS(Reaction Control System)等控制信号,并设计了数字滤波器对弹性振动与液体晃动信号进行滤波处理。考虑到系统模型具有非线性、不确定性、11阶弹性振动、一阶液体晃动、风干扰和气动偏差等多种外部扰动条件,对可重复使用运载器从主动段到再入飞行段进行了非线性六自由度仿真分析。仿真结果表明,基于四元数的自抗扰姿态控制器具有快速、平稳、超调量小、抗干扰能力强、无系统抖振且控制参数较少的特点。     

ZnO单晶的微区光致发光特性研究

ZnO单晶材料以其优良的综合性能在光电子器件方面掀起了研究热潮,因此对ZnO单晶的研究具有重要的理论和实践意义。采用激光辐照的方式,对ZnO单晶进行了光致发光(photoluminescence, PL)光谱实验,分析研究了ZnO单晶在不同温度(低温)和不同激光能量强度照射下其光致发光特性。研究结果表明,ZnO单晶内存在少量杂质及表面氧缺陷,这些结构对其发光特性有一定的影响;在低温条件下,ZnO单晶具有良好的发光特性,且随着温度的提高,发光光谱峰的位置会向长波长方向移动,但强度会减小;当激光光源的强度增大,ZnO单晶的PL发射光谱的强度也会随之增大,且峰的位置和相对强度不变。结合拉曼(Raman)光谱实验,从分子及原子振动、转动类型验证了纤锌矿ZnO单晶的六方晶系结构;配合X射线衍射(X-ray diffraction, XRD)技术,得出ZnO单晶良好的结晶特性以及晶轴取向。     

Identification of surface oxygen vacancy-related phonon–plasmon coupling in TiO_2 single crystal

Oxygen vacancies(OVs) play a critical role in the physical properties and applications of titanium dioxide nanostructures, which are widely used in electrochemistry and photo catalysis nowadays. In this work, OVs were artificially introduced in the surface of a pure TiO_2 single crystal by pulsed laser irradiation. Raman spectra showed that the intensity of E_g mode was enhanced. Theoretical calculations disclose that this was caused by the strong coupling effect between the phonon vibration and plasmon induced by the OVs-related surface deformation, and good agreement was achieved between the experiments and theory.