专家系统柱推荐软件之一——判断用气相色谱分析是否满足必要条件的软件

 ]本文报道了色谱专家系统中判断样品是否满足气相色谱(GC)分析必要条件的软件，依据是：能以合适k'(0.2k'20)流出且在柱温孪下稳定的样品可采用GC法分析。而k'值通过结构和保留值间的关系式来计算。作者使用框架结构的知识表达法，用SchcmeLisp语言，在IBMPC机上实现了这一专家判断功能。采用本文列出的知识库和源程序，可对含C、H、Q、N、Cl、Br、I、P、S、Si等元素的化合物能否采用气相色谱进行判断。     

立规聚甲基丙烯酸热表征研究

本文对不同立构的聚甲基丙烯酸(PMAA)进行了热表征。实验结果表明,在30℃～200℃内未出现玻璃化转变。间同PMAA分别在-245℃和-280℃发生脱水反应和脱羧,而全同PMAA只在-185℃观察到脱水反应。这种热稳定性的明显差别与不同立构PMAA链上相邻羧酸距离有关。实验数据证实PMAA脱水反应为无规反应,服从一级动力学反应方程。脱水温度和间同立构含量成正比,脱水反应活化能间同PMAA比全同PMAA高～7Kcal/mol。     

线性非理想条件下液相色谱柱末端峰形规律

 色谱流出曲线的二阶中心矩μ２和三阶中心矩μ３以及描述峰形非对称程度的偏态系数∑ｋ＝μ３／μ１．５２是反映色谱峰形的重要参数。从液相色谱过程动力学方程出发，运用电子计算机证明了在线性非理想条件下高效液相色谱体系中不同保留值组分在柱末端峰形的分布基本一致的结论。     

Construction of a Novel 2D Polymer [Co（dmpzm）（dca）2]∞ from Reaction of a Mononuclear Complex [Co（dmpzm）Cl2] with Sodium Dicyanamide （dca） [dmpzm=bis（3,5-dimethylpyrazolyl）methane]

Reaction of COC12.6H20 with equimolar bis（3,5-dimethylpyrazolyl）methane （dmpzm） produced a mononuclear adduct [Co（dmpzm）Cl2] （1）. Treatment of 1 with sodium dicyanamide （dca） afforded a polymeric complex [Co（dmpzm）（μ-dca）2]∞ （2）. 1 and 2 were characterized by elemental analysis, IR spectra, thermogravimetric analysis and single-crystal X-ray diffraction. The cobalt atom in 1 adopts a distorted tetrahedral coordination geometry, bound to two N atoms of one dmpzm and two Cl atoms. Complex 2 has a 2D brick-wall network （extended along the bc plane） in which the { [Co（dmpzm）（μ-dca）]2} n^2n＋ chains are interconnected by pairs of μ-dca anions along the c axis. The magnetic properties of 1 and 2 were also investigated.     

基于二茂铁羧酸配体的镉配合物的合成及结构研究

以二茂铁甲酸根FcCOO^-(Fc=(η⁵-C₅H₅)Fe(η⁵-C₅H₄))为主要配体，合成了3个新的配合物[Na₂Cd( μ₃-η²-FcCOO^-)₂(μ₂-η²-FcCOO^-)₂(CH₃OH)₂]_n (1)、[Cd(phen)(FcCOO^-)(η²-FcCOO)(H₂O)](phen=邻菲咯啉) (2)、[Cd(Det)(η²-FcCOO^-)(FcCOO^-)](H₂O)₂(Det=二乙撑三胺) (3)。测定了配合物的晶体结构。配合物1为单斜晶系，C2/c空间群，二茂铁甲酸根采用μ₃-η²-FcCOO^-和μ₂-η²-FcCOO^-的配位方式将Cd²⁺和Na⁺连接成一维无限链状结构。配合物2和3均为单核结构，单斜晶系，P2₁/c空间群，二茂铁甲酸根都采用 FcCOO^-和η²-FcCOO^-的方式配位。2中phen以双齿螯合形式配位，水分子参与配位，中心镉离子配位数为6。3中Det以三齿螯合形式配位，中心镉离子配位数也为6，但水分子未参与配位。     

二氯亚甲基锗烯与乙烯环加成反应机理的理论研究

The mechanism of a cycloaddition reaction between singlet dichloromethylene germylene and ethylene has been investigated with B3LYP/6-31G＊ method, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. Energies for the involved conformations were calculated by CCSD（T）//B3LYP/6-31G＊ method. On the basis of the surface energy profile obtained with CCSD（T）// B3LYP/6-31G＊ method for the cycloaddition reaction between singlet dichloromethylene germylene and ethylene, it can be predicted that the dominant reaction pathway is that an intermediate INT1 is firstly formed between the two reactants through a barrier-free exothermic reaction of 61.7 kJ/mol, and the intermediate INT1 then isomerizes to an active four-membered ring product P2.1 via a transition state TS2, an intermediate INT2 and a transition state TS2.1, in which energy barriers are 57.7 and 42.2 kJ/mol, respectively.     

PEAK IDENTIFICATION FROM INTERACTION INDEX IN REVERSED-PHASE HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY

The interaction index c which was derived from the fundamental retention equationlogk' =a + cC_B in reversed--phase high--performancc liquid chromatography (RP-HPLC) quan-titatively describes the difference in the interaction between solute--strong. solvent andsolute--weak solvent; it has shown to be a constant for a specific solute even when columnsystems with different C18 packings are used. The theoretical basis for peak identificationby using interaction index has been proposed, which was based on the a,c values on stan-dard C18 column by utilizing linear a-a plots on column pairs and the linear relationship be-tween parameters a and c for the structural related compounds. Through the establishmentof parameters a,c data based on the standard C18 column for a certain type of compounds,the retention of thesc compounds on various C18 columns can be predicted. Typical exam-ples have been given to verify the correctness of this method.     

由液相色谱保留值变化规律式进行固定相、流动相推荐和色谱峰定性

 本文应用统计热力学导出的保留值变化规律式以及式中参数与溶质分子结构参数的关系，建立了反相色谱流动相和固定相的选择规则，并应用文献中的结果对这些规则进行了初步验证。本文还从分子结构和分子作用力出发，研究了各类组分用保留值变化规律式中参数与分子结构参数的定量关系进行色谱峰保留值定性的可行性。     

新型微填充柱－毛细管柱二维色谱系统过程的动力学研究

从色谱动力学角度对新型微填充柱－毛细管柱二维色谱系统过程中双柱条件与流出曲线及柱效之间的依赖关系加以系统研究。结果表明：由于双柱条件之间存在关联，双柱系统流出曲线特征与单柱系统存在一定的差异，流出曲线一阶矩和二、三阶中心矩以及双柱系统的柱效皆由预柱和主柱条件综合确定。     

新颖双核钐硫酚化合物[(THF)3I2Sm(m-SAr)]2 (Ar = Ph, 4-Me2NC6H4)的合成与化合物[(THF)3I2Sm(m-S-4-Me2NC6H4)]2的晶体结构

Reactions of SmI2 in THF with ArSSAr produced two binuclear samarium thiolate complexes [（THF）3I2- Sm（μ-SAr）]2 [Ar=Ph （1）, 4-Me2NC6H4 （2）] in high yields. The structure of 2 was characterized by single crystal X-ray crystallography. The crystal of 2 belongs to the triclinic system with space group P 1 and a=0.95705（13） nm, b= 1.22287（14） nm, c= 1.26450（14） nm, a=64.194（11）°, B=78.491（13）°, y=76.176（12）°, V= 1.2860（3） nm^3, Z= 1,μ=4.783 mm^-1, Dc= 1.964 Mg/m^3, M= 1521.19, S= 1.046, R1=0.0358, wR2=0.0910. X-ray analysis revealed that 2 is a thiolate-bridged dimer in which each Sm atom adopts a distorted pentagonal bipyramidal coordi- nation geometry.