排序方式: 共有134条查询结果,搜索用时 15 毫秒
41.
42.
43.
以SO42-、F-、Cl-和PO43-作为阴离子来研究其对水热合成TiO2(分别记为TiO2-S、TiO2-F、TiO2-Cl和TiO2-P)晶体的影响,并考察了其光催化性能.SEM显示TiO2-S、TiO2-F、TiO2-Cl和TiO2-P分别呈粒子、十面体、刺球和不规则块状.XRD图谱表明TiO2-S和TiO2-F为锐钛矿晶型,TiO2-Cl为金红石晶型,而TiO2-P为锐钛矿、金红石和板钛矿混合晶型,这一结论也被紫外-可见漫反射实验所证实.XPS能谱表明这4种TiO2纳米材料都受到了各自阴离子掺杂的影响,光催化试验显示:它们的光催化活性顺序为: TiO2-F>TiO2-S>TiO2-Cl>TiO2-P,这表明锐钛矿的光催化活性要大于金红石和板钛矿,且具有{001}面,掺杂了F的锐钛矿光催化活性更强. 相似文献
44.
45.
46.
应用MCNPX程序,构建质子束轰击球床钨颗粒散裂靶的物理模型,模拟散裂靶泄露中子产额、能谱、通量轴向分布以及散裂靶沉积能分布。针对不同钨颗粒直径和体积填充率,研究了不同钨颗粒直径下体积填充率变化对球床散裂靶中子学特性的影响。模拟结果表明,钨颗粒体积填充率增加,散裂靶的最大沉积能密度减小。在1~20 mm的范围内,钨颗粒的直径越小,散裂靶泄漏中子产额越大,散裂靶泄漏中子产额随钨颗粒体积填充率变化的波动越小,有利于维持CIADS系统反应堆功率稳定。The physical model of the high-energy proton bombarding the tungsten pebble bed spallation target is simulated by the MCNPX program. The effect of the filling rate on the neutronic characteristics with different particle diameters is studied, by calculating the leakage neutron yield, leakage neutron spectrum axial neutron flux distribution and the energy deposition of the target. The result shows that when the diameter increases from 1 to 20 mm,the maximum deposited energy density decreases in the target, but the leakage neutron yield increases. When the filling rate reaches 74%, leakage neutron yields are almost the same value with different particle diameters. When the target is piled up with 1 mm tungsten particles, neutron leakage yield changes smaller with the variation of the filling rate than the other diameter particles which is beneficial to maintain the reactor power stability in ADS. 相似文献
47.
49.
50.
为探究土壤间各养分指标间的相互关系,选取了天津市宁河区不同区域的种植土壤,基于行业标准规定的检测方法,对主要养分指标进行了测定,并研究各指标间的相关性。结果表明,各区域土壤pH值变异系数最小,整体均呈碱性;有机质、全氮及速效钾变异系数属于中等;有效磷的变异系数最高。各研究区域土壤有机质含量与全氮含量呈显著正相关(P<0.01),与pH值呈显著负相关(P<0.01),而与其他指标间不具备普遍且显著的相关性。基于多元线性回归分析建立了土壤有机质与全氮及pH值之间的预测模型,通过模型计算出的预测值与实际测定值的拟合性较好;另取土壤样品进行验证表明,预测模型具有良好的可靠性和准确性。 相似文献