超短脉冲激光光束在一维反射型体全息光栅中的衍射

基于Kogelnik的耦合波理论,研究了在色散效应的影响下,超短脉冲激光光束在反射型体全息光栅中衍射的性质.研究给出了衍射光及透射光在频谱域及时间域的振幅及强度分布、光栅的光谱宽度及衍射效率随光栅参量及入射条件的变化.数值研究的结果表明,在光栅记录介质色散效应的影响下,衍射光束的光谱宽度减小,脉冲展宽,衍射效率降低.通过适当的选取光栅参量及入射条件,可以控制衍射和透射光束的频谱和时间强度分布,得到满意的衍射和透射光束的带宽和波形,从而可以将其应用于脉冲整形等技术中.     

LiNbO3∶Cr∶Cu晶体吸收特性及非挥发全息存储研究

研究了LiNbO3∶Cr∶Cu晶体的吸收特性,发现LiNbO3∶Cr∶Cu（含0.14 wt.% Cr2O3 和 0.011 wt.% CuO）晶体存在两个明显的吸收峰,中心波长分别位于480 nm和660 nm; 随着Cr的含量逐渐减小,Cu的含量逐渐增大,短波段不存在明显吸收峰,掺Cr的含量越大,中心波长在660 nm处的吸收越大；633 nm红光虽然位于中心波长为660 nm的吸收峰内,但它无助于光折变过程.分别采用390 nm紫外光和488 nm蓝光作为敏化光,514 nm绿光作为记录光的记录方案,实现了非挥发全息记录,掺入适量的Cr( 比如NCr=2.795×1025 m－3,NCr/ NCu=1)有助于全息记录性能的提高.     

用于双光子激发荧光寿命显微成像的高重复频率皮秒扫描相机

建立了一台基于新研制的高重复频率皮秒扫描相机的双光子激发荧光寿命显微成像系统,重点介绍所研制的高重复频率皮秒扫描相机。为了在高时间分辨力的同时扩大时间测量范围,实现大面积两维空间高时间分辨取样测量,从而提高采样速率和更有效地发挥扫描相机的作用,设计和研制了一种大面积、高时间分辨力扫描变像管和一种重复频率高达1MHz的斜坡电压扫描电路。基于上述关键部件所研制的扫描相机具有重复频率高、扫描速度可调、时间分辨力高、工作面积大、非线性低、触发晃动小等优点。用钛宝石飞秒激光器作为激光脉冲源,通过脉冲提取器将76MHz的高重复频率降低为1MHz,采用可调延时器和标准具对扫描相机的时间分辨力、扫描速度和非线性进行标定。该系统的时间分辨力达到6.5ps,非线性为2.60%,可测量的时间范围从十几皮秒到几十纳秒。测量了若丹明6G和香豆素314两种标准荧光染料的荧光寿命,取得了与参考文献一致的实验结果。     

基于联合变换相关器的Dempster-Shafer理论计算

提出了用联合变换相关器(JTC)来实现证据理论概率分配函数正交和的光学计算,在理论上对于如何用联合变像相关器实现证据理论分配函数正交和作了详细的讨论,并作了相应的仿真测试,结果显示该方法是可行的。与John Caulfield提出的用声光器件矢量外积实现的正交和计算相比,在该结构中由于采用二进制编码的数值计算,因此其计算精度得到了提高,同时对联合变换相关器输入端二进制编码的数值空间位置的适当调整可以直接得到所需要的证据理论正交和矢量,在处理步骤上得到了简化。     

Inner Surface Modification of a Tube by Magnetic Glow-Arc Plasma Source Ion Implantation

A new method named the magnetic glow-arc plasma source ion implantation （MGA-PSⅡ） is proposed for inner surface modification of tubes. In MGA-PSⅡ, under the control of an axial magnetic field, which is generated by an electric coil around the tube sample, glow arc plasma moves spirally into the tube from its two ends. A negative voltage applied on the tube realized its inner surface implantation. Titanium nitride （TIN） films are prepared on the inner surface of a stainless steel tube in diameter 90mm and length 600mm. Hardness tests show that the hardness at the tube centre is up to 20 GPa. XRD, XPS and AES analyses demonstrate that good quality of TiN films can be achieved.     

Epidemic Dynamics with Feedback Mechanism in Exponential Networks

We introduce a feedback mechanism to study the spreading of an epidemic by analytical methods and large scale simulations in exponential networks. It is found that introducing the feedback mechanism can reduce the density of infected individuals, Furthermore, it does not change the epidemic threshold （critical point） λc. These results can help us to understand epidemic spreading phenomena on social networks more practically and design appropriate strategies to control social infections.     

Evolution of Weighted Networks by Duplication-Divergence Mechanism

The duplication and divergence process is ubiquitous in nature and man-made networks. Motivated by the duplication-divergence mechanism which depicts the growth of protein networks, we propose a weighted network model in which topological evolution is coupled with weight dynamics. Large scale numerical results indicate that our model can naturally generate networks with power-law-like distributions of degree, strength and weight. The degree-strength correlation is illustrated as well. These properties are in agreement well with empirical data observed in real-world systems. Furthermore, by altering the retention probability δ, weighted, structured exponential networks are realized.     

Reduction of Dislocations in GaN Epilayer Grown on Si （111） Substrates using a GaN Intermedial Layer

GaN intermedial layers grown under different pressures are inserted between GaN epilayers and AIN/Si（111） substrates. In situ optical reflectivity measurements show that a transition from the three-dimensional （3D） mode to the 2I） one occurs during the GaN epilayer growth when a higher growth pressure is used during the preceding GaN intermedial layer growth, and an improvement of the crystalline quality of GaN epilayer will be made. Combining the in situ reflectivity and transmission electron microscopy （TEM） measurements, it is suggested that the lateral growth at the transition of growth mode is favourable for bending of dislocation lines, thus reducing the density of threading dislocations in the epilayer.     

敏化光波长对(Fe,Ni):LiNbO3晶体全息记录性能的影响

分别采用514 nm绿光、488 nm蓝光和390 nm紫外光作为敏化光,633 nm红光作为记录光,详细研究了敏化光波长对氧化(Fe,Ni):LiNbO3晶体全息记录性能的影响.结果表明:随着敏化光波长的逐渐减小,氧化(Fe,Ni):LiNbO3晶体的非挥发全息记录性能逐渐优化,390 nm紫外光是这三种敏化光中最优的敏化光.考虑敏化光的吸收,为了在双中心全息记录中获得最优的性能,应当选择合适波长的敏化光:一方面短波长敏化光能有效地敏化深中心;另一方面短波长敏化光的吸收太强(如对光折变效应无用的基质吸收),不能沿厚度方向有效地敏化晶体,所以实际上需折衷考虑,并从理论上给予了解释.     

Cr-Co-Ga Heusler合金新材料探索和物性研究

通过实验和计算研究了从Co₂CrGa到Cr₂CoGa一系列渐变成分合金(Co_50-xCr_x+25Ga₂₅,x=0—25) 的结构、磁性及输运性质.当Cr不断替代A位Co时,晶体结构逐渐从典型的L2₁结构过渡到Hg₂CuTi结构,晶格常数线性地增大0.69%.合金的磁性从Co_{2 关键词： CrCoGa Hesuler合金 KKR-CPA-LDA计算}