Amorphous-amorphous transition in glassy polymers subjected to cold rolling studied by means of positron annihilation lifetime spectroscopy

In this study, polycarbonate (PC) and polystyrene (PS) are subjected to plastic deformation by means of cold rolling and the resulting variation of the free volume and its subsequent time evolution after rolling is investigated by means of positron annihilation lifetime spectroscopy (PALS). The value of the long lifetime component that is attributed to the decay of ortho-positronium (tau(o-Ps)) and its intensity (I(o-Ps)) are used to characterize, respectively, the size and the concentration of the free-volume holes. In addition to the PALS experiments, the effect of plastic deformation on the dynamic tensile modulus is investigated. The PALS results show that both for well-aged PC and PS an increase of tau(o-Ps) and a decrease of I(o-Ps) occur upon plastic deformation. During the subsequent aging, tau(o-Ps) tends to return to the value assumed before plastic deformation, while I(o-Ps) remains constant with time. These results corroborate the idea of an amorphous-amorphous transition, rather than that of a "mechanical rejuvenation" as proposed in the past to explain the ability of plastic deformation to reinitiate physical aging. Finally, a linear relation between the size of the free-volume holes and the dynamic tensile modulus is found, which suggests that the stiffness of amorphous glassy polymers is fully determined by their nanoscopic structure.     

Anisotropic muon Knight shift in the HCP single crystals of Cd,Zn and Be

In single crystal samples of Zn, Cd and Be (hcp structure) stroboscopicSR measurements successfully revealed anisotropies in the muon Knight shift (K). An anisotropic K can provide information on the amount of non s-electrons screening the charge of the muon implanted in these metals as a light hydrogen isotope. In Cd, the anisotropic part depends strongly on the temperature and shows a change in sign at roughly 110 K. In Zn, the anisotropic part below 10 K turns out to comprise 4th order contributions in the direction cosines of the external field. This can be understood on the basis of an anisotropicg-factor of the conduction electrons or spin-orbit coupling, respectively.     

Direct determination of the enantiomeric purity of oxyphenonium using chiral HPLC with post-column extraction detection

Summary A method is described for the determination of the enantiomeric purity (enantiomeric excess) of the anticholinergic drug oxyphenonium. The method for this quaternary ammonium compound is based on the direct HPLC analysis with a chiral stationary phase. Two kinds of 1-acid glycoprotein-bonded phases were used.For the detection a post-column extraction with fluorescence detection of the ion-pair counter ion dimethoxyantracene sulphonate was used.     

Isolation and synthesis of vobparicine,a novel type dimeric indole alkaloid

From the rootbark of Tabernaemontana chippii a novel antimicrobially active dimeric indole alkaloid was isolated which was assigned structure $\text{1}$ on the basis of spectroscopic evidence and its synthesis.     

Photometrische Titration der Carboxylendgruppen in Poly?thylenterephthalat

Zusammenfassung Es wird eine schnelle Methode zur Bestimmung von Carboxylendgruppen in Polyäthylenterephthalat beschrieben; sie beruht auf der Messung der Farbänderung von Bromphenolblauindicator während der Titration einer Lösung des Polymeren in o-Kresol/Chloroform mit alkoholischer Lauge.Resultate von Bestimmungen an einer organischen Säure und an Polymerproben werden gegeben. Die Resultate von Bestimmungen an Polymeren wurden mit denen nach der von Pohl beschriebenen visuellen, nach der von Maurice beschriebenen potentiometrischen Methode und nach der von Ward beschriebenen Infrarotmethode verglichen und gleiche Resultate erhalten. Die photometrische Methode wird aus verschiedenen Gründen bevorzugt.

---

Photometric titration of carboxyl end groups in polyethylene terephthalate

The method is based on the continuous measurement of the changes in absorbance of bromophenol blue indicator during titration of a solution of the polymer in o-cresol/chloroform with standard alcoholic potassium hydroxide solution.Results are given of tests with an organic acid and polymers amples. The results obtained with the polymer samples are compared with those obtained by the visual titration method of Pohl, the potentiometric titration method of Maurice and the infrared method of Ward. The four methods yield the same results. For several reasons the photometric method is preferred.

     

The signal vs. concentration relationships in fluorimetry

Formulae for the fluorescence signal are derived which take into account some factors hitherto neglected. From these formulae conditions are deduced, for which a linear relationship exists between the concentration of the fluorescent components and the intensity of the fluorescence. In some cases of practical interest the fulfilment of these conditions cause too low a sensitivity. For such cases a method of optimization is outlined, by means of which the conditions are found which lead to the least deviation from linearity at the required sensitivity.     

SCF—CI calculations and the assignment of the absorption spectrum of the excimer of 1-methyl naphthalene; relation to 1,1′-binaphthyl

An SCF MO calculation followed by extensive configuration interaction between all singly-excited singlet states has been performed for the excimer of naphthalene in a perfect and in some distorted sandwich structures. With these results an assignment is given for the bonds in the absorption spectrum of the excimer of 1-methyl naphthalene. It is further shown that the similarity between the optical properties of the 1-methyl naphthalene excimer and those of 1,1′-binaphthyl in fluid solution, is also reflected by the calculations.     

Remarkable O(2)-effect in 1,4-additions of diethylzinc to 6-acyloxy-2H-pyran-3(6H)-ones and 6-alkoxy-2H-pyran-3(6H)-ones

Under the influence of air, a facile 1,4-addition of diethylzinc to acyloxypyranones and alkoxypyranones 1 takes place. Reaction of diethylzinc with molecular oxygen provides EtOOZnEt, which catalyzes the addition of diethylzinc.     

The luminescence of uranime-activated yttrium tungstate (Y2WO6)

The luminescence of uranium in Y₂WO₆ can be excited with long wavelength ultraviolet radiation at temperatures below room temperature. The emission consists of a fairly narrow band in the orange part of the spectrum. Its characteristics are comparable with the luminescence of uranium in MgWO₄ and the scheelites MWO₄ (M = Ca, Sr, Ba). It is possible to relate the thermal quenching temperature of the luminescence to spectral data. Energy transfer from the tungstate group to the uranate group is observed, but its efficiency is not very high compared with other systems.     

Expert system for precision testing in validation of liquid chromatographic methods

After a liquid chromatographic method has been developed, it must be validated to establish its limitations in daily use. Method validation is becoming increasingly important as stricter rules are applied by regulatory authorities. Precision testing is a vital step in this validation; both intralaboratory testing and interlaboratory testing are needed. In an intralaboratory test, repeatability and ruggedness tests are usually done. Expert systems are available for both tests. Here they are integrated to form an intralaboratory precision-testing expert system; special integration architecture is described. Important features of the integrated system are a supervisor containing planning knowledge about the tests and a common data structure containing all the objects necessary for an expert system in this area.