Organic polymer‐based monolithic capillary columns and their applications in food analysis

In recent years, the use of organic polymer monolithic capillary columns in separation science has gained popularity due to the fact that they are easy to fabricate and do not require retaining frits. These materials have been applied in different fields including foods, proteomics, and pharmaceuticals. The interest in food analysis still needs to develop in order to increase the sensitivity towards micro/nano‐scale food applications for food samples of < 5 μg (e.g., foodomics). In this regard, polymer monolithic capillary columns offer great separation capability in the food analytical separation science. We review the most important applications in food analysis using polymer monolithic capillary columns. In addition, several examples of the use of capillary separation methods combined with mass spectrometry detection in food analysis are summarized.     

In vitro evaluation of potential complexation between bovine insulin and bovine serum albumin

The objective of this study was to examine the possible binding of bovine insulin (BI) with bovine serum albumin (BSA) to form a new potential diabetogenic irreversible complex protein. Several preparations of BSA and BI were prepared. Both capillary electrophoresis and spectrophotometric analysis were undertaken to test the possibility of complexation between BI and BSA. HPLC was used to test whether the potential complex of BI and BSA is reversible or irreversible. The optimum deviation between the real and calculated absorbances was observed at a BI/BSA ratio of 2. Moreover, the migration time of BI decreased substantially with increasing ratio of BI to BSA until it became almost constant at equal molar ratio of BI/BSA. While the majority of the 2:1 BI–BSA sample detached during the HPLC analysis, which confirms the reversible character of BI–BSA binding, the HPLC chromatogram also emphasizes the formation of an irreversible complexation between the two proteins. This study provides evidence of the formation of reversible and irreversible new BI–BSA complexes under physiological conditions. This highlights the importance of examining the possible diabetogenicity of BI–BSA complex in genetically susceptible people. Copyright © 2013 John Wiley & Sons, Ltd.     

Affinity monolithic capillary columns for glycomics/proteomics: 1. Polymethacrylate monoliths with immobilized lectins for glycoprotein separation by affinity capillary electrochromatography and affinity nano-liquid chromatography in either a single column or columns coupled in series

In this report, microcolumn separation schemes involving monolithic capillary columns with immobilized lectins, and relevant to nanoglycomics/nanoproteomics were introduced. Positive and neutral monoliths based on poly(glycidyl methacrylate-co-ethylene dimethacrylate) were designed for achieving lectin affinity chromatography (LAC) by nano-LC and CEC. The positive monoliths (i.e., monoliths with cationic sites) afforded relatively high permeability in nano-LC but lack predictable EOF magnitude and direction, while neutral monoliths provided a good compromise between reasonable permeability in nano-LC and predictable EOF in CEC. Lectin affinity nano-LC permitted the enrichment of classes of different glycoproteins having similar N-glycans recognized by the immobilized lectin, whereas lectin affinity CEC provided the simultaneous capturing and separation of different glycoproteins due to differences in charge-to-mass ratio. Also, this investigation demonstrated for the first time the coupling of lectin capillary columns in series (i.e., tandem columns) for enhanced separation of glycoproteins by LAC using the CEC modality. Furthermore, in the coupled columns format, glycoforms of a given glycoprotein were readily separated.     

Analytical Expressions for the Mixed-Order Kinetics Parameters of TL Glow Peaks Based on the two Heating Rates Method

The two heating rates method (originally developed for first-order glow peaks) was used for the first time to evaluate the activation energy (E) from glow peaks obeying mixed-order (MO) kinetics. The derived expression for E has an insignificant additional term (on the scale of a few meV) when compared with the first-order case. Hence, the original expression for E using the two heating rates method can be used with excellent accuracy in the case of MO glow peaks. In addition, we derived a simple analytical expression for the MO parameter. The present procedure has the advantage that the MO parameter can now be evaluated using analytical expression instead of using the graphical representation between the geometrical factor and the MO parameter as given by the existing peak shape methods. The applicability of the derived expressions for real samples was demonstrated for the glow curve of Li₂B₄O₇:Mn single crystal. The obtained parameters compare very well with those obtained by glow curve fitting and with the available published data.     

Impedance study of polymethyl methacrylate composites/multi-walled carbon nanotubes (PMMA/MWCNTs)

The dielectric behavior of polymethyl methacrylate/multi-walled carbon nanocomposites (PMMA/MWCNTs) was investigated using impedance spectroscopy technique. The composites were prepared using melt mixing with MWCNTs loading ranging from 0.01 to 10 wt%. The experimental results showed that the measured impedance reflects the insulating behavior of the host material (PMMA) with no appreciable effects of the filler less than 8.5 wt%. However, for the sample containing 10 wt%, the calculated value of dc conductivity increases with increasing temperature from 2.0×10⁻⁶ (Ω m)⁻¹ to attain a value of 4.8×10⁻⁶ (Ω m)⁻¹ at 110 °C. The percolation threshold derived from the dielectric data was estimated to be higher than 8.5 wt% and lower than 10 wt%. A temperature dependent electrical relaxation phenomenon was only observed in the sample containing 10 wt% of MWCNTs. The frequency dependence of the ac conductivity data followed a power law.     

Heat transfer on A/C humidifier operating by solar energy

A solar humidifier unit used for humidification of an air conditioning system is presented. A Runge–Kutta procedure of fifth order has been used to solve the governing equations. Solar energy data as well as ambient temperature data for one hot summer day were used in calculation the inside temperature of the humidifier as well as other parameters to determine the effective use of the solar humidifier. The results obtained are promising to corporate it with an A/C system. The amount of vapor produced reaches a maximum value at the time when the ambient temperature reaches also a maximum value and the relative humidity reaches a minimum values. Received on 8 October 1998     

Determination of <Superscript>210</Superscript>Pb in human skeletal remains from Morocco: implications for time since death assessment

In forensic contexts, time since death assessment in human skeletal remains is crucial for identification, and both accuracy and reliability are required. In this paper, we present the possibilities and constraints of the use of ²¹⁰Pb in dating skeletonized human bones in Morocco. The method was tested on recent as well as archaeological bones of known dates of death. A calibration curve was obtained from the available data in the scientific literature. The ²¹⁰Pb initial activity was introduced as an increasing lineal function with time. The ²¹⁰Pb dating approach gives promising results only for recent bones. On the contrary, for archaeological bones, the technique has erroneously led to post-mortem intervals in the range of recent bones which constitute a serious limitation of the method. On the other hand, uranium isotopes content in bones is suggested in this work as a possible indicator in placing a studied bone within either a forensic or archaeological context.     

Capillary electrochromatography with monolithic stationary phases. II. Preparation of cationic stearyl-acrylate monoliths and their electrochromatographic characterization

A novel cationic monolithic stationary phase based on the co-polymerization of pentaerythritol diacrylate monostearate (PEDAS) with a selected quaternary amine acrylic monomer was designed for performing capillary electrochromatography at high flow velocity. While PEDAS functioned as both the ligand provider and the cross-linker, the quaternary amine acrylic monomer was introduced to control the magnitude of the electroosmotic flow (EOF). The fabrication of the cationic stearyl-acrylate monolith (designated as cationic C17 monolith) with controlled porosity was achieved by free radical polymerization using the initiator 2,2'-azobisisobutyronitrile in the presence of a ternary porogenic solvent composed of cyclohexanol, ethylene glycol and water. Four different quaternary amine acrylic monomers were investigated in order to find the optimum monomer for achieving maximum electroosmotic flow (EOF) velocity. Both photo- and thermally-initiated polymerization proved effective in producing the cationic C17 monolith, and the best monolith was achieved when [2-(acryloyloxy)ethyl]trimethyl ammonium methyl sulfate (AETA) was used as the quaternary amine acrylic monomer. Although the zeta potential of the resulting cationic C17 monolith is positive with respect to water, the magnitude and direction of the EOF was markedly affected by the nature of the electrolyte in the mobile phase. Consequently, anodal, zero or cathodal EOF was observed depending on the nature of the electrolyte, and this was attributed to the adsorption of the ionic components of the electrolyte on to the solid stationary phase, which is characterized by its amphiphilic nature consisting of C17 chains, ester functions, hydroxyl groups and quaternary amine moieties. Optimized PEDAS-AETA monoliths yielded columns with high separation efficiency and allowed rapid separations on the time scale of seconds to be achieved with short capillaries.