Modeling the deformation behavior of nanocrystalline alloy with hierarchical microstructures

A mechanism-based plasticity model based on dislocation theory is developed to describe the mechanical behavior of the hierarchical nanocrystalline alloys. The stress–strain relationship is derived by invoking the impeding effect of the intra-granular solute clusters and the inter-granular nanostructures on the dislocation movements along the sliding path. We found that the interaction between dislocations and the hierarchical microstructures contributes to the strain hardening property and greatly influence the ductility of nanocrystalline metals. The analysis indicates that the proposed model can successfully describe the enhanced strength of the nanocrystalline hierarchical alloy. Moreover, the strain hardening rate is sensitive to the volume fraction of the hierarchical microstructures. The present model provides a new perspective to design the microstructures for optimizing the mechanical properties in nanostructural metals.     

Ignition and burning behaviors of automobile oil in engine compartment

Accidental leakage of automobile oils is of great inclination to initiate pool fires in engine compartment, with threats to induce the flashover of other components and flame penetration into the passenger compartment. This paper presents experimental results of the ignition and burning behaviors of a kind of automobile oils (automatic transmission oil) using a cone calorimeter. Measurements of oil temperature, ignition time, mass loss and heat release rate are performed at different external heat fluxes and initial fuel depths. The comparison between experimental and numerical oil temperature evolutions shows that the variations of the ignition time at different experimental conditions depend on the heat dissipation process inside the liquid phase. The steady mass burning rate is nearly independent of initial fuel depth and has a linear relation with external heat fluxes. In addition, the results indicate an increase in peak heat release rate by a large margin initially, followed by a relatively small margin under thicker initial fuel depths, while its variations are proportional to external heat fluxes. Correlations are also developed to determine the peak heat release rate as a function of the initial fuel depth.

     

A simple, rapid, and efficient oxidation of oximes to ketones and aldehydes with manganese dioxide catalyzed by kieselguhr under solvent-free conditions

A simple, rapid, and efficient oxidation of oximes to the corresponding ketones and aldehydes with manganese dioxide catalyzed by kieselguhr under solvent-free conditions at room temperature in the yields between 82 and 98 is described. It seems that kieselguhr in the present procedure can highly expedite the reaction rate. By comparing to other methods described previously, the main advantages of this oxidation are that the oxidations are more efficient, the reaction conditions are milder, the reaction times are shorter, and the work-up is easier. Furthermore, the amount of manganese dioxide used in this oxidation is largely decreased.     

Quantitative assessment of rhodamine spectra

With the development of single-molecule detection and super-resolution fluorescence imaging, rhodamine dyes gain new life. Through the modification of the N-substituents and the replacement of the oxygen atom in xanthene, the wavelength and brightness can be effectively changed. However, the spectra of rhodamine, especially due to the balance between ring-closed non-fluorescent lactone and ring-opened fluorescent zwitterion/cation, are sensitive to interference from various environmental factors. In this way, the spectral data of various rhodamines reported by different research groups under different test conditions lacked comparability, sometimes even lacked accuracy. In order to meet the requirements for the accuracy and uniformity of spectral data in the research of single molecule imaging and dye structure-fluorescence relationship study, we have tested the spectra of fifteen rhodamine dyes that cover the visible and near-infrared regions under exactly the same conditions. By studying the dependence of the spectra on dye concentrations, it was confirmed that 1 μmol/L was ideal for detection less from the interference of dye molecule aggregation. We provide comprehensive and reliable spectral data of these fifteen dyes, which are expected to be used as references for future research. And the direct comparison of different rhodamine spectra would help to understand the structure-fluorescence relationship of rhodamines.     

Synthesis and properties of novel soluble poly(amide‐imide)s with different pendant substituents

Two types of novel fluorinated diimide‐diacid monomers—[2,2′‐(4,4′‐(3′‐methylbiphenyl‐2,5‐diyl)bis(oxy)bis(3‐(trifluoromethyl)‐4,1‐phenylene))bis(1,3‐dioxoisoindoline‐5‐carboxylic acid)] (III) and [2,2′‐(4,4′‐(3′‐(trifluoromethyl)biphenyl‐2,5‐diyl)bis(oxy)bis(3‐(trifluoromethyl)‐4,1‐phenylene))bis(1,3‐dioxoisoindoline‐5‐carboxylic acid)] (IV)—were respectively designed and prepared by the condensation of diamines I and II with two molar equivalents of trimellitic anhydride. From both diimide‐diacids, two series of novel poly(amide‐imide)s (PAIs) (IIIa–IIIe and IVa–IVe) bearing different pendant groups were prepared by direct polymerization with various aromatic diamines (a–e). All the PAIs had a high glass transition temperatures (T_gs, 232–265 °C), excellent thermal stability (exhibiting only 5% weight loss at 493–542 °C under nitrogen) and good solubility in various organic solvents due to the introduction of the bulky pendant groups. The cast films of these PAIs (80–90 μm) had good optical transparency (73–81% at 450 nm, 85–88% at 550 nm and 87–89% at 800 nm) and low dielectric constants (2.65–2.98 at 1 MHz). The spin‐coated films of these PAIs presented a minimum birefringence value as low as 0.0077–0.0143 at 650 nm and low optical absorption at the near‐infrared optical communication wavelengths of 1310 and 1550 nm. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3243–3252     

Structural,magnetic and optical properties of vanadium doped zinc oxide: Systematic first-principles investigations

The electronic structural, magnetic and optical properties of pure and V-doped ZnO are investigated by first-principles calculations based on the density functional theory. With the introduction of V atoms, the spin-splitting near the Fermi level leads to a net magnetic moment of the system. A significant possibility of room temperature ferromagnetism (RTFM) originated from the Ruderman–Kittel–Kassuya–Yosida (RKKY) exchange is predicted. Oxygen vacancy is positive to enhance the ferromagnetism while zinc vacancy is negative. With respect to the optical properties, the presence of V atoms was found to have an obvious influence on the transmittivity, especially in the low energy region. A slight V-doping can keep a high optical transmission and smoothly modulate the optical bandgap.     

Infrared imaging as a means of visually characterizing the thermoacoustic onset process influenced by a Helmholtz resonator

A Helmholtz resonator can be used as a transmission part to connect the thermoacoustic engine (TE) with its load. However, the resonator can significantly influence the performance of the TE. In order to investigate the impact of a Helmholtz resonator on the onset process of a TE, infrared (IR) imaging is firstly used as a visualization method to characterize the onset mechanism. The influence of dimensions of the Helmholtz resonator on the onset process are analyzed experimentally and theoretically. Results show that the Helmholtz resonator reduces the pressure amplitude at the onset moment and increases the onset temperature of the TE, both of which depend on the acoustic power absorbed from the TE. Onset without a sudden increase of pressure amplitude is observed with the Helmholtz resonator at resonance length. This paper shows that IR imaging is an effective way to characterize the temperature distribution in a TE study.     

Cerium (IV) ammonium nitrate (CAN)-mediated regioselective synthesis and anticancer activity of 6-substituted 5,8-dimethoxy-1,4-naphthoquinone

6-Substituted 5,8-O-dimethyl-1,4-naphthoquinones (6-DMNQ), the promising anticancer scaffolds, were selectively generated by oxidative demethylation of 2-substituted 1,4,5,8-tetramethoxynaphthalenes with CAN in EtOAc/H₂O in comparatively high yields. An interesting finding was that apart from the reported electron-withdrawing effects of substituents on position 2 of naphthalene ring, regioselective synthesis of 6-DMNQ was largely dependent on the steric effects in CAN-mediated oxidation. The selective cytotoxicities of 6-DMNQ from the in vitro cell-based assays were exhibited between the cancer cells and normal cells. Moreover, most of sulfur-containing 6-DMNQ derivatives displayed better anticancer activities than the corresponding oxygen-containing ones, which could provide an available strategy for the design of 6-DMNQ derivatives as potential anticancer agents.