An atomic-absorption spectrometric method is reported for the determination of cobalt, nickel, and copper in a variety of geological materials including iron- and manganese-rich, and calcareous samples. The sample is decomposed with HP-HNO3 and the residue is dissolved in hydrochloric acid. Ammonium fluoride is added to mask iron and 'aluminum. After adjustment to pH 6, cobalt, nickel, and copper are chelated with sodium diethyl-dithiocarbamate and extracted into methyl isobutyl ketone. The sample is set aside for 24 h before analysis to remove interferences from manganese. For a 0.200-g sample, the limits of determination are 5–1000 ppm for Co, Ni, and Cu. As much as 50% Fe, 25% Mn or Ca, 20% Al and 10% Na, K, or Mg in the sample either individually or in various combinations do not interfere. Results obtained on five U.S. Geological Survey rock standards are in general agreement with values reported in the literature. 相似文献
Side-chain engineering has been demonstrated as an effective method for fine-tuning the optical, electrical, and morphological properties of organic semiconductors toward efficient organic solar cells (OSCs). In this work, three isomeric non-fullerene small molecule acceptors (SMAs), named BTP-4F-T2C8, BTP-4F-T2EH and BTP-4F-T3EH, with linear and branched alkyl chains substituted on the α or β positions of thiophene as the side chains, were synthesized and systematically investigated. The results demonstrate that the size and substitution position of alkyl side chains can greatly affect the electronic properties, molecular packing as well as crystallinity of the SMAs. After blending with donor polymer D18-Cl, the prominent device performance of 18.25% was achieved by the BTP-4F-T3EH-based solar cells, which is higher than those of the BTP-4F-T2EH-based (17.41%) and BTP-4F-T2C8-based (15.92%) ones. The enhanced performance of the BTP-4F-T3EH-based devices is attributed to its stronger crystallinity, higher electron mobility, suppressed biomolecular recombination, and the appropriate intermolecular interaction with the donor polymer. This work reveals that the side chain isomerization strategy can be a practical way in tuning the molecular packing and blend morphology for improving the performance of organic solar cells.
1. INTRODUCTION Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) has been recognized as apotential environment-friendly substitute for traditional plastics. The structure, mechanicalproperties and biodegradability of PHBV as biodegradable plastic have been reported by many groups [1-3]. However, PHBV presents some problems, such as high cost, slow crystallization rate, relatively difficult processing and high degree of crystallinity. Therefore, it is difficult to use PHBV widel… 相似文献
The vanadium trapping effect of Mg and La containing additives in cracking catalyst contaminated with 2300 ppm Ni and 4700 ppm V has been analyzed by microactivity test (MAT) and imaging secondary ion mass spectrometry (SIMS). The results of SIMS imaging are consistent with cracking activity data and show that the La/spinel is a superior vanadium trap for the fluid catalytic cracking of hydrocarbons (FCC) operation. La/spinel serves as a dual function additive for both vanadium trap and SOx removal. The optimum amount of La/spinel added to the cracking catalyst is about 15% by weight. This results in an increased catalytic activity, an increase in gasoline yield, and a decrease in coke and gas factors. The MgAl2O4 phase of Mg/Al2O3 additive is found capable of trapping vanadium while its MgO of Mg/Al2O3 phase can migrate to zeolite particles (the active component of the FCC catalyst) that, in turn, causes a decline in the activity of that catalyst. 相似文献
Four new triterpenoid saponins, named scheffarboside A – D ( 1 – 4 ), along with five known saponins were isolated from the stems of Schefflera arboricola. The structures of the four new saponins were determined as 3‐O‐(O‐β‐glucuronopyranosyl‐(1 → 3)‐O‐α‐rhamnopyranosyl‐(1 → 2)‐α‐arabinopyranosyl)oleanolic acid ( 1 ), 3‐O‐(O‐α‐arabinopyranosyl‐(1 → 4)‐O‐α‐arabinopyranosyl‐(1 → 3)‐O‐α‐rhamnopyranosyl‐(1 → 2)‐α‐arabinopyranosyl)oleanolic acid ( 2 ), 3‐O‐(O‐α‐arabinopyranosyl‐(1 → 4)‐O‐α‐arabinopyranosyl‐(1 → 3)‐O‐α‐rhamnopyranosyl‐(1 → 2)‐α‐arabinopyranosyl)hederagenin ( 3 ), 3‐O‐(O‐α‐arabinopyranosyl‐(1 → 4)‐O‐α‐arabinopyranosyl‐(1 → 3)‐O‐α‐rhamnopyranosyl‐(1 → 2)‐α‐arabinopyranosyl)oleanolic acid O‐α‐rhamnopyranosyl‐(1 → 4)‐O‐β‐glucopyranosyl‐(1 → 6)‐β‐glucopyranosylester ( 4 ), respectively, on the basis of spectroscopic and chemical degradation methods. 相似文献
The charge transport properties of mer-tris(8-hydroxyquinolinato)aluminum(III) (mer-Alq), which is the most widely used electron transport material in OLED, were investigated by quantum chemistry calculations within the framework of the charge hopping model and Marcus electron transfer theory. Internal reorganization energies of 0.276 and 0.242 eV were calculated by the DFT-B3LYP method employing a 6-31 G* basis set for the electrons lambdai(e) and holes lambdai(h), respectively. The relative distances and orientations of Alq molecules in amorphous film were simulated by those in the beta-phase. The intermolecular charge-transfer integrals, Hda(h) and Hda(e), along all 14 hopping pathways were then calculated by the Koopmans Theorem in conjunction with the Hartree-Fock method employing a 6-31 G* basis set as well as by the direct coupling method. The results showed that there were some Hda(e) that were 1 order of magnitude larger than any Hda(h), because hopping pathways with effective overlaps of LUMOs can occur and, thus, large Hda(e). On the other hand, effective overlap of HOMO was absent in all pathways, resulting in a relatively small Hda(h). This difference in the magnitudes of Hda(e) and Hda(h) would predict a 2 orders of magnitude difference in the electron-transfer rate constants and account for the observed 2 orders of magnitude difference in the mobilities of electrons and holes. 相似文献