STM study on quinacridone derivative assemblies: modulation of the two-dimensional structure by coadsorption with dicarboxylic acids

We describe the two-dimensional (2D) assemblies of N,N'-dialkyl-substituted quinacridone derivatives on highly orientated pyrolytic graphite observed by scanning tunneling microscopy, and focus our discussion on whether the supramolecular organization can be modulated by the coadsorption of dicarboxylic acids. Our experiments have demonstrated that the quinacridone derivatives can form different 2D nanostructures when coadsorbed with dicarboxylic acids of different length at the liquid/graphite interface. Interestingly, N,N'-dihexadecyl-substituted quinacridone derivative alternately takes two different conformations in two columns for its coadsorption with pentadecanedioic acid and form a gridlike structure. It is shown that a cooperative effect of different interactions can be modulated by introducing guest molecule, leading to formation of different self-assembled nanostructures.     

Different catalysis role of in‐loop and out‐of‐loop waters in assisting HNS/HSN proton transfer isomerizations: Bridging vs. surrounding effect

In this work, a density function theory (DFT) study is presented for the HNS/HSN isomerization assisted by 1–4 water molecules on the singlet state potential energy surface (PES). Two modes are considered to model the catalytic effect of these water molecules: (i) water molecule(s) participate directly in forming a proton transfer loop with HNS/HSN species, and (ii) water molecules are out of loop (referred to as out‐of‐loop waters) to assist the proton transfer. In the first mode, for the monohydration mechanism, the heat of reaction is 21.55 kcal · mol^?1 at the B3LYP/6‐311++G** level. The corresponding forward/backward barrier lowerings are obtained as 24.41/24.32 kcal · mol^?1 compared with the no‐water‐assisting isomerization barrier T (65.52/43.87 kcal · mol^?1). But when adding one water molecule on the HNS, there is another special proton‐transfer isomerization pathway with a transition state 10T′ in which the water is out of the proton transfer loop. The corresponding forward/backward barriers are 65.89/65.89 kcal · mol^?1. Clearly, this process is more difficult to follow than the R–T–P process. For the two‐water‐assisting mechanism, the heat of reaction is 19.61 kcal · mol^?1, and the forward/backward barriers are 32.27/12.66 kcal · mol^?1, decreased by 33.25/31.21 kcal · mol^?1 compared with T. For trihydration and tetrahydration, the forward/backward barriers decrease as 32.00/12.60 (30T) and 37.38/17.26 (40T) kcal · mol^?1, and the heat of reaction decreases by 19.39 and 19.23 kcal · mol^?1, compared with T, respectively. But, when four water molecules are involved in the reactant loop, the corresponding energy aspects increase compared with those of the trihydration. The forward/backward barriers are increased by 5.38 and 4.66 kcal · mol^?1 than the trihydration situation. In the second mode, the outer‐sphere water effect from the other water molecules directly H‐bonded to the loop is considered. When one to three water molecules attach to the looped water in one‐water in‐loop‐assisting proton transfer isomerization, their effects on the three energies are small, and the deviations are not more than 3 kcal · mol^?1 compared with the original monohydration‐assisting case. When adding one or two water molecules on the dihydration‐assisting mechanism, and increasing one water molecule on the trihydration, the corresponding energies also are not obviously changed. The results indicate that the forward/backward barriers for the three in‐loop water‐assisting case are the lowest, and the surrounding water molecules (out‐of‐loop) yield only a small effect. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

混合三烃基锡衍生物的研究：X.甲基二环己基锡二硫代磷酸酯的合成及生…

合成了１０种甲基二环己基锡－Ｏ，Ｏ－二烃基二硫代磷酸酯，利用ＩＲ，ＮＭＲ，ＭＳ及元素分析确证了化合物的结构，生物活性测试结果表明，这类化合物具有较高的杀螨和除草活性。     

甲烷直接氧化制甲醇Ⅱ．催化膜反应器（CMR）

采用溶胶－凝胶（Ｓｏｌ－Ｇｅｌ）法制备了微孔结构均匀的“ＳｉＯ＿２／陶瓷”膜和“Ｍｏ－Ｃｏ－·Ｏ／ＳｉＯ＿２／陶瓷”催化功能膜，并用ＸＲＤ、ＳＥＭ和孔径测定等技术进行了表征。在常压、５００～７００℃的条件下，在催化膜反应器（ＣＭＲ）中考察了甲烷氧化制甲醇的反应。在相似的反应条件下（转化率为１．０％），用ＣＭＲ（甲醇选择性１１．２％）可获得较固定床反应器（甲醇选择性４．５％）高得多的甲醇选择性。     

甲烷在Ni表面及La薄膜上激活解离化学吸附

利用分子束技术改变甲烷的平动能E_k来研究E_k及其法向分量E_n对甲烷在Ni表面及La薄膜上激活解离吸附的影响。对CH_4/Ni及CH_4/La系统, 当甲烷的平动能E_k分别低于58.5 kJ·mol~(-1)及52.3 kJ·mol~(-1)时, 没观察到甲烷的解离吸附。当甲烷的平动能超过此阈值时, 即对CH_4/Ni系统, 当Ek=58.5增至63.8 kJ·mol~(-1)时, 初始沾着几率s_0由0至0.54线性增加; 对CH_4/La系统, 当E_k=52.3增至63.8 kJ·mol~(-1)时, S_0由0至0.49线性增加。这些结果表明, 两个系统的化学吸附是不经过前趋态的直接化学吸附。最后求出CH_4/Ni, CH_4/La系统的表观活化能分别为46.8 kJ·mol~(-1)和38.1 kJ·mol~(-1)。     

Hydrogen-bonding-directed layer-by-layer assembly of poly(4-vinylpyridine) and poly(4-vinylphenol): effect of solvent composition on multilayer buildup

This paper describes the buildup of hydrogen-bonding-directed poly(4-vinylpyridine)/poly(4-vinylphenol) (PVPy/PVPh) multilayer film that was fabricated by layer-by-layer (LbL) assembly of PVPy and PVPh from an ethanol solution. UV-visible spectroscopy and Fourier transform infrared (FT-IR) spectroscopy revealed a uniform deposition process. The interaction between PVPy and PVPh was identified as hydrogen bonding through FT-IR spectroscopy and temperature-dependent IR spectral changes of the hydrogen-bonded multilayer. Notably, we discussed the effect of solvent conditions on the growth of PVPy/PVPh multilayer films monitored by UV-visible spectroscopy. It was found that increasing the ratio of N,N-dimethylformamide (DMF) in the mixed ethanol/DMF solvents resulted in a marked decrease of the amount of polymers adsorbed, which was attributed to the increased polarity of the adsorption solutions. Furthermore, the solvent stability of PVPy/PVPh multilayer film in mixed ethanol/DMF solvents with different DMF ratios was also investigated. As a result, a new method for tuning the structure of hydrogen-bonding-directed multilayer film was developed.     

1-辛烯Ziegler-Natta聚合的活性中心多分散性——分子量分布及动力学的研究

本文通过对TiCl_3-Al(C_2H_5)_3聚合1-辛烯产物的双峰型分子量分布曲线用Schulz函数进行拟合、分峰处理,发现这种双峰型分布中的高分子量峰部分由一种活性中心生成,低分子量峰部分则由至少两种活性中心生成.将不同转化率时聚辛烯的分子量分布分峰拟合数据与聚合速率、活性中心数等测定数据相结合,得到了高分子量和低分子量两部分产物相应的活性中心上各自的动力学参数(增长速率常数、活性中心数、链转移常数等)及各自的聚合速率曲线,从而证实了多种活性中心的存在、它们催化特性的差异及与聚合物分子量分布增宽的关系.     

稀土离子（Ⅲ）与牛血清白蛋白作用的紫外光谱

用紫外光谱研究了稀土离子（Ⅲ）与牛血清白蛋白（BSA）的作用．14种稀土离子均使BSA～280um特征吸收峰强增加，诱导BSA构象发生改变．紫外差谱结果表明，只有氧原子参加与稀土配位．BSA与稀土配位基团为亲水外壳的氨基酸波基和肽键上的C＝O基团．     

In situ gamma ray-initiated polymerization to stabilize surface micelles

Surfactant molecules containing hydrophobic long alkyl chains and hydrophilic groups can organize into various micellar structures both in bulk solution and at interface. However, because of the dynamical nature of surfactant micelles, efforts directed at fixing their structures in bulk solution by polymerization have met with limited success. Herein, we report a unique and simple method of stabilizing surface micelles of a low molecular weight surfactant 11-acryloyloxyundecyltriethylammonium bromide (AUTEAB) through in situ intramicellar polymerization on the mica surface. Atomic force microscopy (AFM) observations show that the cylindrical micellar structure formed by AUTEAB monomers at the mica/water interface is preserved after the in situ polymerization, and the stability of the polymerized surface micelles is greatly enhanced compared with that of the unpolymerized ones.     

Polyethylene with bimodal molecular weight distribution synthesized by 2,6-bis(imino)pyridyl complexes of Fe(II) activated with various activators

Polyethylenes with bimodal molecular weight distribution (MWD) were synthesized by 2,6-bis(imino)pyridyl complexes of Fe(II) combined with different activators, which were prepared from alkylaluminium. It is found that the molecular weight (MW) and MWD was influenced by not only iron complexes but activators as well. The activator plays key important role in determination of the MW and MWD of final polymer and the MWD shape could be regulated by selection of various activators and polymerization conditions. The study on the variation of the MWD with the polymerization time and fitting of bimodal MWD with two Flory distributions suggests that bimodal MWD is caused by chain transfer reaction to activator or two active sites.