Hollow fiber supported liquid membrane extraction for ultrasensitive determination of trace lead by portable tungsten coil electrothermal atomic absorption spectrometry

Hollow fiber supported liquid membrane extraction (HF-SLME) was used to separate and enrich trace lead from a large volume of 250 mL water sample to a final tiny volume of 30 μL of 1-octanol, 5 μL of which was inject into a tungsten coil electrothermal atomic absorption spectrometer (W-coil ET-AAS) for determination of lead. Some important parameters that influenced the extraction and determination were investigated in detail, such as the concentration of ammonium pyrrolidine dithiocarbamate (APDC), pH of sample solution, stirring rate, extraction time, pyrolysis current, atomization current, carrier gas flow rate, as well as interferences. Under the optimized conditions, a practical enrichment factor of 499 and a limit of detection (3σ) of 0.2 ng mL^{− 1} were obtained. The calibration curve was linear in the range of 0.5–10 ng mL^{− 1}. The relative standard deviation (RSD) was 5.6% for five measurements of a 4 ng mL^{− 1} lead standard solution. The accuracy of this method was examined by the analysis of certified reference water samples (GBW(E)080398 and GSBZ(E) 50009-88) for lead. Finally, the proposed method was applied to the determination of lead in local tap water, pond water and river water, with recoveries in the range of 96–109% for spiked samples.     

NdF3-LiF-Nd2O3熔盐体系中下阴极电解金属钕研究

设计了下阴极结构的稀土金属电解槽,该电解槽底部以钨材料为容器兼阴极,上部悬挂多块石墨作阳极,在NdF3·LiF-Nd2O3体系中,探索研究了液态下阴极电解制备金属钕的工艺技术条件.研究表明,在槽温990～1020℃,阴极电流密度1～3 A·cm-2.槽电压5.6 V条件下,电解可平稳进行,电流效率达65.64%,稀土回收率达88%～92%;该工艺与目前主流上插阴极电解工艺相比,其电解温度和槽电压明显降低,降低了电耗.     

复发性阿弗他溃疡与相关的营养因素研究进展

以国内外研究复发性阿弗他溃疡营养因素的相关论文为依据,综述了近十年有关对复发性阿弗他溃疡（RAU）营养因素的研究进展。包括：RAU与微量元素锌、铁、硒、铜,维生素A、C、E、B2、B12,蛋白质,膳食纤维和谷类的关系。RAU的发生与体内微量元素锌、铁、硒、铜的减少,维生素A、C、E、B2、B12,蛋白质和膳食纤维的摄取不足密切相关,全谷类食品（功能稻米）对缓解RAU有帮助。     

Quantitative analysis of three chiral pesticide enantiomers by high-performance column liquid chromatography

Methods for the enantiomeric quantitative determination of 3 chiral pesticides, paclobutrazol, myclobutanil, and uniconazole, and their residues in soil and water are reported. An effective chiral high-performance liquid chromatographic (HPLC)-UV method using an amylose-tris(3,5-dimethylphenylcarbamate; AD) column was developed for resolving the enantiomers and quantitative determination. The enantiomers were identified by a circular dichroism detector. Validation involved complete resolution of each of the 2 enantiomers, plus determination of linearity, precision, and limit of detection (LOD). The pesticide enantiomers were isolated by solvent extraction from soil and C18 solid-phase extraction from water. The 2 enantiomers of the 3 pesticides could be completely separated on the AD column using n-hexane isopropanol mobile phase. The linearity and precision results indicated that the method was reliable for the quantitative analysis of the enantiomers. LODs were 0.025, 0.05, and 0.05 mg/kg for each enantiomer of paclobutrazol, myclobutanil, and uniconazole, respectively. Recovery and precision data showed that the pretreatment procedures were satisfactory for enantiomer extraction and cleanup. This method can be used for optical purity determination of technical material and analysis of environmental residues.     

摩擦接触问题的比例边界等几何B可微方程组方法

摩擦接触问题是计算力学领域最具挑战性的问题之一,接触系统的泛函具有非线性、非光滑的特点,导致接触算法的收敛性与精确性难以保证.因此将比例边界等几何分析(scaled boundary isogeometric analysis,SBIGA)与B可微方程组(B dierential equation,BDE)相结合,提出了求解二维摩擦接触问题的比例边界等几何B可微方程组方法.在比例边界等几何坐标变换的基础上,通过虚功原理推导了关于边界控制点变量的接触平衡方程,表示成B可微方程组形式的接触条件可被严格满足,求解B可微方程组的算法的收敛性有理论保证.此比例边界等几何B可微方程组方法(SBIGA-BDE)只需在接触体边界进行等几何离散,使问题降低一维,能精确描述接触边界,并可通过节点插入算法进行真实接触区域的识别.此外,由于几何建模和数值分析使用相同的基函数,节约了划分网格的时间.以赫兹接触问题和悬臂梁摩擦接触问题为例,通过与解析解及数值计算软件ANSYS计算结果进行对比,验证了该方法求解二维摩擦接触问题的有效性及高精度等特点.      

完全与不完全叉形分岔实验

介绍一种可演示完全与不完全叉形分彷的实验装置，并分析其机理。本文对非线性动力学实验设计有一定启示作用。     

甘肃引洮供水工程饱和黄土隧洞施工方法选择的工程地质研究

甘肃引洮供水一期工程总干渠13#、14#、15#隧洞围岩为al-lQ2饱和黄土,地下水位高于洞顶4³7m,饱和度一般在98%¹00%,水稳性很差。因此,该段隧洞施工方法的选择十分重要,从工程地质角度研究其工程特性,采用D rucker-Prager弹塑性模型、关联流动法则,模拟了传统钻爆法开挖时隧洞稳定性,计算表明,若采用钻爆法,由于围岩的岩性软弱,隧洞开挖后,在隧洞周围较大范围内存在应力降低区,隧洞位移十分迅速而且位移量非常大,洞顶下降发生塌方并引起地面沉降。从盾构法施工对地质条件的适应性分析,其施工风险相对较小,施工过程中可利用护盾很快封闭围岩,因此该段隧洞宜采用盾构法施工。     

发动机机油滤清器虑层强度分析及优化

针对机油滤清器工作工况下进出口压差、机油滤层强度及导流桩高度等问题, 通过试验测试与仿真相结合, 对滤清器初步设计进行了评估及优化, 以确保滤清器在工作工况下进出口压降及滤层强度能满足要求. 首先进行滤层性能试验, 得到滤层的惯性阻力系数和黏性阻力系数; 再通过滤层多孔介质CFD分析, 对滤清器进出口压降进行分析计算. 结果表明: 在-18℃、25℃和70℃的工况下, 进出口压降都小于10kPa, 满足相关要求. 针对滤层的最大主应力超过其抗拉强度的问题, 通过CAE仿真分析, 优化滤层与导流桩间隙, 将滤层最大主应力由110.1MPa降至36.99MPa, 小于其抗拉强度42.8MPa.     

时间延迟扩散-波动分数阶微分方程有限差分方法

本文提出求解时间延迟扩散-波动分数阶微分方程有限差分方法，方程中对时间的一阶导函数用α阶（0 < α < 1） Caputo分数阶导数代替.文章中利用Lubich线性多步法对分数阶微分进行差分离散，且文章利用分段区间证明该方法是稳定的，且利用数值实验加以验证.