Structural, magnetic properties and photoemission study of Ni-doped ZnO

Nickel-doped ZnO (Zn_1−xNi_xO) have been produced using rf magnetron sputtering. X-ray diffraction measurements revealed that nickel atoms were successfully incorporated into ZnO host matrix without forming any detectable secondary phase. Ni 2p core-level photoemission spectroscopy confirmed this result and suggested Ni has a chemical valence of 2+. According to the magnetization measurements, no ferromagnetic but paramagnetic behavior was found for Zn_0.86Ni_0.14O. We studied the electronic structure of Zn_0.86Ni_0.14O by valence-band photoemission spectroscopy. The spectra demonstrate a structure at ∼2 eV below the Fermi energy E_F, which is of Ni 3d origin. No emission was found at E_F, suggesting the insulating nature of the film.     

A theory of coupled diffusion and large deformation in polymeric gels

A large quantity of small molecules may migrate into a network of long polymers, causing the network to swell, forming an aggregate known as a polymeric gel. This paper formulates a theory of the coupled mass transport and large deformation. The free energy of the gel results from two molecular processes: stretching the network and mixing the network with the small molecules. Both the small molecules and the long polymers are taken to be incompressible, a constraint that we enforce by using a Lagrange multiplier, which coincides with the osmosis pressure or the swelling stress. The gel can undergo large deformation of two modes. The first mode results from the fast process of local rearrangement of molecules, allowing the gel to change shape but not volume. The second mode results from the slow process of long-range migration of the small molecules, allowing the gel to change both shape and volume. We assume that the local rearrangement is instantaneous, and model the long-range migration by assuming that the small molecules diffuse inside the gel. The theory is illustrated with a layer of a gel constrained in its plane and subject to a weight in the normal direction. We also predict the scaling behavior of a gel under a conical indenter.     

SURFACE METALLIZATION OF CENOSPHERES AND PRECIPITATORS BY ELECTROLESS PLATING

This paper reports the use of a colloidal Pd^0 catalysis system to metallize the surface of precipitators separated from coal fly-ash, and metals such as Cu, Ni etc. are deposited on the precipitators surface. Alternatively, according to the characteristic surface of cenospheres, an Ag coating catalysis system is adopted to first deposit Ag on the cenospheres surface, followed, if necessary, by the deposition of other metals such as Cu, Ni, etc. on the Ag coating to produce monolayer and multilayer metal-coated cenospheres. The surface characteristics and the morphologies of the metal coatings are examined in detail with scanning electron microscopy (SEM), energy dispersive spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) techniques. It can be shown that the quality of metal coatings derived from the Aa coatina catalysis system, is better than that of the colloidal Pd^0 catalysis system.     

PERIODIC SOLUTIONS OF PLANAR SYSTEM WITH SIX DELAYS

In this paper we obtain some sufficient conditions for the existence of non-constant periodic solutions of the following planar system with six delaysOur approach is based on the continuation theorem of the coincidence degree.     

Synthesis of optically active poly(N‐propargylsulfamides) with helical conformation

A novel chiral N‐propargylsulfamide monomer ( 1a ) and its enantiomer ( 1b ) were synthesized and polymerized with (nbd)Rh⁺B^?(C₆H₅)₄ as a catalyst providing poly(1) (poly( 1a ) and poly( 1b )) in high yields (≥99%). Poly(1) could take stable helices in less polar solvents (chloroform and THF), demonstrated by strong circular dichroism signals and UV–vis absorption peaks at about 415 nm and the large specific rotations; but in more polar solvents including DMF and DMSO, poly(1) failed to form helix. Quantitative evaluation with anisotropy factor showed that the helical screw sense had a relatively high thermal stability. These results together with the IR spectra measured in solvents showed that hydrogen bonding between the neighboring sulfamide groups is one of the main driving forces for poly(1) to adopt stable helices. In addition, copolymerization of monomer 1a and monomer 2 was conducted, the solubility of poly(1) was improved drastically. However, the copolymerization had adverse effects on the formation of stable helices in the copolymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 500–508, 2007     

Facile route to high-density, ordered ZnO nanowire arrays and their photoluminescence properties

A simple template-directed wet chemistry route based on traditional thermal decomposition technique has been developed for the preparation of high-density, ordered ZnO nanowire arrays. The fabrication was performed at relative low temperature without involving complex procedures, sophisticated equipment and rigorous experiment conditions, thereby providing a straightforward and mild method to produce metal/metal oxide ordered nanostructures. The nanowire array system was evaluated by SEM, XRD, TEM and PL. A stable luminescence at 425 nm was present.     

A new isoprenyl phenyl ether compound from mangrove fungus

A new isoprenyl phenyl ether, 3-hydroxy-4-(3-methylbut-2-enyloxy)benzoic acid methyl ester (1), together with 4-hydroxybenzoic acid (2), 2-hydroxy-6-methylbenzoic acid (3), and 4-hydroxy-3-methoxybenzoic acid (4) were isolated from Mangrove fungus (No. B60) from the South China Sea. The structures of the compounds were established on the basis of NMR spectroscopic and mass spectrometric data. In the preliminary bioassay, compound 1 exhibited antibacterial and antifungal activities. Compound 1 also inhibited cytotoxicity to the hepG2 cell line with an IC₅₀ value of 10.0 μg/mL. Published in Khimiya Prirodnykh Soedinenii, No. 4, pp. 313–314, July–August, 2007.     

Synthesis, antitumor and DNA photocleaving activities of novel naphthalene carboxamides: effects of different thio-heterocyclic rings and aminoalkyl side chains

Two kinds of thio-heterocyclic fused naphthalene carboxamides, 3a-b, 4a-b, were designed, synthesized and quantitatively evaluated as efficient antitumor and DNA photocleaving agents. Compound 3a or 3b, having the thiophene ring, intercalated into DNA more strongly than compound 4a or 4b, having the thioxanthene ring. Compound 4a or 4b, photocleaved DNA more efficiently than 3a or 3b via superoxide anion. Compound 4a was the strongest inhibitor for P388 (murine leukemia cell), while 3a was the most cytotoxic one against A549 (human lung cancer cell). Each new compound showed stronger DNA photocleaving activity than corresponding naphthalimide.     

Catalyst-substrate helical character matching determines enantiomeric excess

In the framework of a helix theory recently developed for molecular chiralities and chiral interactions, it is further proposed that for an asymmetric reaction to be highly enantioselective, the helical characters, that is, the local energies of electrons on the helices, of the catalyst and the substrate complexed with it in the corresponding enantioselection-determining step must be matched. These helical characters can be analyzed on the basis of molecular polarizability and structure properties under a given reaction mechanism. This proposal highlights the importance of polarizability matching in three-dimension chiral space and in essence is a chiral version of the classical hard and soft acid-base theory. It also from an electronic effect angle sheds light on the nature of the conventional lock-and-key origin of high enantioselection and carries the message that, to design a good catalyst (the key), rather than focusing on the rigidity, bulkiness or C₂-symmetry of the catalyst, one should focus more on the helical character of the substrate (the lock) with which the catalyst will interact. It is generally easier to discover a highly enantioselective catalyst for a substrate of a large helical character than for a substrate of a small helical character. The proposal is supported by theoretical modeling as well as numerous experiments and is used to understanding various aspects of current asymmetric catalysis.     

Structural and photocatalytic properties of the new solid photocatalyst In2BiTaO7

In₂BiTaO₇ was synthesized using the solid-state reaction method and its photocatalytic properties were investigated. The results of powder X-ray diffraction (XRD) indicated that the compound crystallizes in the pyrochlore-type structure, cubic system with space group Fd-3m. The lattice parameter is 10.6972(1) ?. In addition, the compound shows strong optical absorption in the visible region (λ > 420 nm) and the band gap of In₂BiTaO₇ was estimated to be about 2.47 eV. For the photocatalytic reaction, H₂ or O₂ evolution was observed from CH₃OH/H₂O or AgNO₃ solution respectively with In₂BiTaO₇ as the photocatalyst under visible light irradiation, indicating that In₂BiTaO₇ is responsive to visible light for splitting water. Furthermore, the catalyst remained photoactive in the wavelength range up to 510 nm. Photocatalytic degradation of methylene blue (MB) dye over the compound was further investigated under visible light irradiation. The results showed that complete removal of aqueous MB could be achieved after irradiation for 135 min over In₂BiTaO₇. Furthermore, under visible light irradiation In₂BiTaO₇ showed markedly higher catalytic activity compared to P-25 for MB photocatalytic degradation.