Application of Nafion／Cobalt Hexacyanoferrate Chemically Modified Electrodes for the Determination of Electroinactive Cations by Ion Chromatography

Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｉｏｎｃｈｒｏｍａｔｏｇｒａｐｈｙ (ＩＣ)ｈａｓｂｅｅｎｒｅｃｏｇｎｉｚｅｄａｓａｕｓｅｆｕｌｍｅｔｈｏｄｆｏｒｔｈｅｓｅｐａｒａｔｉｏｎｏｆｉｎｏｒｇａｎｉｃａｎｉｏｎｓａｎｄｃａｔｉｏｎｓｓｉｎｃｅｉｔｓｉｎｔｒｏｄｕｃｔｉｏｎｂｙＳｍａｌｌｅｔａｌ .ｉｎ 1975 .1ＡｓｉｇｎｉｆｉｃａｎｔｔｒｅｎｄｉｎｔｈｅｄｅｖｅｌｏｐｍｅｎｔｏｆＩＣｍｅｔｈｏｄｉｓｓｅａｒｃｈｆｏｒｓｅｎｓｉｔｉｖｅａｎｄｕｎｉｖｅｒｓａｌｄｅｔｅｃｔｉｏｎｍｅｔｈｏｄｓ .Ｔｈｅｍａｉｎｄｅｔ…     

吖啶类衍生物的荧光性质

用比较法测得23种啶类衍生物的荧光量子效率（Φf)，以评估这些化合物的荧光性质，结果表明，N－烃基吖啶酮类化合物的荧光量子效率要比9－取代苯基吖啶类和9－取代苯亚甲基－10－甲基－9，10－二氢吖啶类化合物的荧光量子效率大，在非极性溶剂中，9－聚代苯亚甲基－9，10二氢吖啶分子内的强吸电子基NO2增强荧光量子效率，强推电子基OCH3降低荧光量子效率，这些测量结果与取代基的电子作用经验规律不相符，这种现象可以用分子内电荷转移理论进行解释。     

黏合剂对其ZSM-5分子筛成型物裂解石脑油的影响

为考察成型时,黏合剂性能对ZSM-5分子筛的影响,对同一分子筛用六种不同黏合剂捏合,挤条成型,进行SEM、NH₃-TPD和N₂物理吸附表征。结果表明,六个成型物在形貌和BET比表面积均无明显差异,二次孔数量明显比分子筛原粉增加。所用纯硅溶胶黏合剂的成型物,其NH₃-TPD酸量、微孔体积和微孔比表面积低于其分子筛原粉。所用含铝黏合剂的成型物,其NH₃-TPD酸量、微孔体积和微孔比表面积变化不明显,BJH累积孔体积明显增加。在固定床反应器中于600 ℃裂解石脑油。发现,纯硅溶胶黏合剂成型物的乙烯+丙烯收率明显低于含铝黏合剂。     

环糊精衍生物在金属催化有机合成中的应用

综述了环糊精(包括α-环糊精,β-环糊精和γ-环糊精)衍生物在金属催化有机合成中的应用,主要包括其作为金属离子配体、金属纳米粒子稳定剂和反相相转移催化剂在氧化、水解、还原、偶联等金属催化反应中的应用.其中环糊精衍生物作为金属离子配体应用最广,由于环糊精部分与底物形成包结络合物,拉近了底物和具有催化活性的金属离子的距离,并固定了底物的反应部位,往往可以显著提高催化反应的反应速率,增强反应的区域选择性和对映选择性.     

3-(N-取代苯基-2-乙酰胺基)硫基-4-N-取代邻羟苯基亚胺基-5-甲基-1,2,4-三唑类化合物的合成及生物活性研究

以对称二氨基硫脲为原料,与冰醋酸反应生成5-甲基-4-氨基-1,2,4-三唑-3-硫酮(1);在弱酸性条件下,1与取代水杨醛反应生成席夫碱中间体5-甲基-4-(N-取代邻羟苯基)亚胺基-1,2,4-三唑-3-硫酮(2a～2c);最后在碱性条件下分别与N-取代苯基-2-氯乙酰胺发生烷基化反应生成15种未见报道的目标化合物3-(N-取代苯基-2-乙酰胺基)硫基-4-(N-取代邻羟苯基)亚胺基-5-甲基-1,2,4-三唑(3a～3o),其结构经IR,1H NMR,13C NMR确证.初步生物测试表明,质量分数为0.01%时,3a～3o对白色念珠菌的抑菌率均达90%以上,具有很强的抑菌活性;对金黄色葡萄球菌、大肠杆菌的抑菌率达80%以上,具有较强的抑菌活性.     

Development of a Defined Medium for Arachidonic Acid Production by Mortierella alpina Using a Visualization Method

Defined medium for arachidonic acid (ARA) production by Mortierella alpina was optimized for its metabolomics study. For this purpose, a visualization method (VM) was applied for the first time. Experiments were designed according to the uniform design with four factors (concentrations of glucose, NaNO₃, KH₂PO₄ and MgSO₄·7H₂O) for each at nine levels. Dry cell weight (DCW), ARA yield in DCW [percent (w/w)] and ARA content in total fatty acids [percent (w/w)] were considered as the three objectives. Optimization of single-objective function and multi-objective function of two objectives and three objectives was attempted. Optimal DCW, ARA yield and ARA content were predicted to occur in a medium that contained (grams per litre): glucose 35, NaNO₃ 1, KH₂PO₄ 7.5 and MgSO₄·7H₂O 2.6. Upon verification, the average tested DCW (12.95?g/l), ARA yield (18.89?%) and ARA content (42.36?%) were fairly close to the predicted values (12.88?g/l, 9.68?% and 35.57?%, respectively). Moreover, DCW, ARA yield and ARA content from the optimum medium increased by 35.68, 47.23 and 30.90?% compared with control, respectively, indicating that VM had succeeded in exploiting the biomass growth and ARA production by M. alpina.     

Mn（OAc）2/Schiff base as a new efficient catalyst system for the Henry reaction of nitroalkanes with aldehydes

A series of novel Schiff bases bearing triazole structure were synthesized and characterized by IR and NMR.Mn（OAc）₂/Schiff base efficiently catalyzed Henry reaction of nitroalkanes with aldehydes to produce the corresponding products of β-nitroalcohols, under mild conditions with high yields（up to 99%）.A reaction mechanism is proposed based on the experimental results.     

Synthesis,biological evaluation and SAR studies of benzimidazole derivatives as H1-antihistamine agents

A series of benzimidazole derivatives have been designed,synthesized and evaluated for H₁ antihistamine activity.Six compounds have showed potent antihistamine H₁ activity.The primary SAR analysis indicated that benzyl or benzylidinyl substituted on the exo-nitrogen atom and C2 of the benzimidazole were significant.Further experiments indicated that compound 17d displayed excellent activity to reduce mast cell degranulation,moderate anti-PAF activity and decreased potency on hERG compared to astermizole.Hence compound 17d could serve as anti-allergic agent for further development.     

Functional improvement of porcine neonatal pancreatic cell clusters via conformal encapsulation using an air-driven encapsulator

Transplantation of islet cells into diabetic patients is a promising therapy, provided that the islet cells are able to evade host immune rejection. With improved islet viability, this strategy may effectively reverse diabetes. We applied 2% calcium alginate to generate small and large capsules to encapsulate porcine neonatal pancreatic cell clusters (NPCCs) using an air-driven encapsulator. After encapsulation, the viability was assessed at 1, 4, 7, 14 and 28 days and secretion of functional insulin in response to glucose stimulation were tested at days 14 and 28. Selective permeability of the small alginate capsules was confirmed using various sizes of isothiocyanate-labeled dextran (FITC-dextran). Encapsulation of NPCCs was performed without islet protrusion in the small and large capsules. The viability of NPCCs in all experimental groups was greater than 90% at day 1 and then gradually decreased after day 7. The NPCCs encapsulated in large capsules showed significantly lower viability (79.50 ± 2.88%) than that of naïve NPCCs and NPCCs in small capsule (86.83 ± 2.32%, 87.67 ± 2.07%, respectively) at day 7. The viability of naïve NPCCs decreased rapidly at day 14 (75.67 ± 1.75%), whereas the NPCCs encapsulated in small capsules maintained (82.0 ± 2.19%). After 14 and 28 days NPCCs' function in small capsules (2.67 ± 0.09 and 2.13 ± 0.09) was conserved better compared to that of naïve NPCCs (2.04 ± 0.25 and 1.53 ± 0.32, respectively) and NPCCs in large capsules (2.04 ± 0.34 and 1.13 ± 0.10, respectively), as assessed by a stimulation index. The small capsules also demonstrated selective permeability. With this encapsulation technique, small capsules improved the viability and insulin secretion of NPCCs without islet protrusion.     

Molecular dynamics study on the relationships of modeling, structural and energy properties with sensitivity for RDX-based PBXs

In this paper,a primary model is established for MD(molecular dynamics) simulation for the PBXs(polymer-bonded explosives) with RDX(cyclotrimethylene trinitramine) as base explosive and PS as polymer binder.A series of results from the MD simulation are compared between two PBX models,which are represented by PBX1 and PBX2,respectively,including one PS molecular chain having 46 repeating units and two PS molecular chains with each having 23 repeating units.It has been found that their structural,interaction energy and mechanical properties are basically consistent between the two models.A systematic MD study for the PBX2 is performed under NPT conditions at five different temperatures,i.e.,195 K,245 K,295 K,345 K,and 395 K.We have found that with the temperature increase,the maximum bond length(L max) of RDX N N trigger bond increases,and the interaction energy(E N-N) between two N atoms of the N-N trigger bond and the cohesive energy density(CED) decrease.These phenomena agree with the experimental fact that the PBX becomes more sensitive as the temperature increases.Therefore,we propose to use the maximum bond length L max of the trigger bond of the easily decomposed and exploded component and the interaction energy E N-N of the two relevant atoms as theoretical criteria to judge or predict the relative degree of heat and impact sensitivity for the energetic composites such as PBXs and solid propellants.