Preparation,thermal properties,and flame retardance of epoxy–silica hybrid resins

A novel epoxy system was developed through the in situ curing of bisphenol A type epoxy and 4,4′‐diaminodiphenylmethane with the sol–gel reaction of a phosphorus‐containing trimethoxysilane (DOPO–GPTMS), which was prepared from the reaction of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) with 3‐glycidoxypropyltrimethoxysilane (GPTMS). The preparation of DOPO–GPTMS was confirmed with Fourier transform infrared, ¹H and ³¹P NMR, and elemental analysis. The resulting organic–inorganic hybrid epoxy resins exhibited a high glass‐transition temperature (167 °C), good thermal stability over 320 °C, and a high limited oxygen index of 28.5. The synergism of phosphorus and silicon on flame retardance was observed. Moreover, the kinetics of the thermal oxidative degradation of the hybrid epoxy resins were studied. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2354–2367, 2003     

负离子元素杂质破坏模型

探讨了HfO₂薄膜中负离子元素杂质破坏模型，并得出薄膜中的杂质主要来源于 镀膜材料. 用电子束蒸发方法沉积两种不同Cl元素含量的HfO₂薄膜，测定薄膜 弱吸收和损伤阈值来验证负离子元素破坏模型. 结果表明，随着Cl元素含量的增加薄膜的弱 吸收增加损伤阈值减小. 这主要是因为负离子元素在蒸发过程中形成挥发性的气源中心而产 生缺陷，缺陷在激光辐照过程中又形成吸收中心. 因此负离子元素的存在将加速薄膜的破坏 . 关键词： 负离子元素杂质 缺陷 吸收     

Synthesis of 5‐Radioiodoarabinosyl Uridine Analog for Probing the HSV‐1 Thymidine Kinase Gene

Tumor cells transduced with herpes simplex virus thymidine kinase gene have been intensively applied to the field of positron emission tomography via imaging of its substrate. As a pilot synthesis approach, a facile preparation of 5‐[¹²⁵I] iodoarabinosyl uridine starting from commercially available uridine is reported herein.     

Hydroxyapatite coating on porous silicon substrate obtained by precipitation process

Hydroxyapatite Ca₁₀(PO₄)₆(OH)₂ (HAP) is known as a bioactive and biocompatible material, HAP coatings were used to improve the biocompatible of substrate by many researcher, In this work, HAP thin films on porous silicon (PS) substrates have been prepared by aqueous precipitation method with rapid thermal annealing (RTA) processes. The HAP films had been prepared under the annealing temperature ranging from 300 to 1000 °C. By the measurement of X-ray diffraction (XRD), it was found that for the crystallinity optimization, the heat-treatment at 850–950 °C for 1 h would be favorable. Atomic force microscopy (AFM) and scanning electron microscope (SEM) measurements reveal a dense and smooth surface of the HAP film, and tightly adherence of the coating on porous silicon substrate after sintered. Thus, by this method, porous silicon could be increased its bioactivity and so that could be used in the biomedical area.     

On N-widths in Ip

In this paper we prove that (1<p<+∞), give the characteristics of x^o and the optimal subspace for n-width d_n in space X=l _n ^N . Where d_n in the n-width, in the sense of Kolmogorov, ofD in X, dⁿ is the n-width ofD with respect to X, in the sense of Gel'fand, δ is the linear n-width ofD with respect to X.     

Rh(Ⅰ),Co(Ⅰ)和Ru(Ⅱ)双齿磷氢化物的合成.结构表征和催化加氢活性

膦配位的过渡金属氢化物被看作是烯烃及其他一些不饱含有机化合物催化加氢反应及氢甲酰化反应的催化活性物种,关于它们的结构与催化活性关系的研究,有着重要的理论意义和实际意义,通常单齿膦配位表现出较高的催化活性,而不同的金属中心在催化活性和选择性上也表现出明显的差别,反映了催化功能与催化活性物种的电子结构和空间结构之间存在着依存关系.膦配体过渡金属氢化物,通常是以它们的相应卤化物经氢化锂铝或硼氢化钠或肼还原得     

大鼠肾组织的超低温快速冷冻固定和冷冻置换研究

超低温快速冷冻固定以极高的冷冻速率（１００００Ｋ／ｓ）对生物组织进行物理固定，可使生物组织结构、组织内可溶性离子及游离性物质得到保存，使被固定后的生物组织保持最接近于原自然状态，这种样品制备方法大大优于化学制备法，因而在Ｘ－射线微分析及免疫细胞化学中得到广泛应用。生物样品超低温快速冷冻后，利用冷冻置换法，在低温下将生物组织内的结晶水缓慢置换出来，而后常规包埋切片，可获得理想的组织结构及组织内待分析成分。本文应用超低温快速冷冻固定技术及冷冻置换法对大鼠肾皮质部的快速冷冻固定及损伤进行探讨。     

自由基引发马来酸二丁酯熔融接枝低密度聚乙烯的研究

用马来酸二丁酯(DBM)为接枝单体,过氧化二枯基(DCPO)为引发剂,对低密度聚乙烯(LDPE)进行了熔融接枝功能化。样品的红外光谱表明接枝反应确已发生。通过对样品中酯基的皂化水解测定产物的接枝率,对产物进行萃取,用凝胶量间接表征产物的交联程度;用溶液的特性粘度从侧面显示样品的支化或降解情况。实验结果表明,产物的接枝率和凝胶量可以通过选择反应条件(温度、时间及反应混合物的组成)来控制;过量的DCPO是引起交联产生凝胶的主要原因;向体系中添加DMF可阻止交联反应的发生,但产物的接枝率也有所下降,以自由基机理对上述结果进行了讨论。     

合成1，3－二（3－羟丙基）四甲基二硅氧烷的新方法

用二乙氧基二甲基硅烷与３－氯丙醇反应，合成了新化合物３－氯丙氧基乙氧基二甲基硅烷，然后用格氏反应代替Ｗａｌｔｅｒ的钠缩合反应，最后经水解制备了１，３－二（３－羟丙基）四甲基二硅氧烷，总收率为４２．０％。