光电解水制氢耦合生物质醇/醛氧化的研究进展

生物质醇/醛是一类重要的生物基平台化合物, 通过催化氧化重整可将其进一步转化为高值含氧化学品或燃料. 太阳能驱动的光电催化技术是实现生物质醇/醛氧化最为绿色高效的途径之一. 与传统光电解水制氢相比, 利用生物质醇/醛氧化来替代阳极析氧过程不仅可以提高阳极产物的附加值, 同时可以提升太阳能到氢能的转化效率. 因此, 光电解水制氢耦合生物质醇/醛氧化对绿氢提效降本和高值化学品合成具有重要意义. 本文综合评述了光电解水制氢耦合生物质醇/醛的氧化反应机理, 总结了目前光电催化技术在生物质醇/醛氧化方面的研究进展, 最后对该领域所面临的机遇和挑战进行了展望.     

豆腐生产过程中微量元素硒分布特性研究

为确定以不同硒含量的大豆为原料生产豆腐过程中硒分布特性,用石墨炉原子吸收分光光度法对该过程中各种产物的硒含量进行了分析研究。结果表明,以硒含量分别为0.692、2.561、2.801 mg/kg的大豆为原料生产得到的豆腐、黄浆水、豆渣的硒含量分别为:0.089、0.250、0.138 mg/kg,0.462、0.760、0.507 mg/kg和0.532、0.764、0.524 mg/kg。豆腐生产过程中,以低硒大豆为原料生产豆腐,硒总回收率为75.59%;采用富硒大豆为原料生产,硒的回收率分别达到87.37%、87.20%;生产过程中豆腐、黄浆水和豆渣中硒含量占总回收硒的比率分别为39.01%～49.97%、23.92%～29.89%、26.11%～30.92%。     

An improved palladium-based DMFCs cathode catalyst

A novel carbon-supported palladium-rich Pd3Pt1/C catalyst prepared by a modified polyol process showed a better cell performance than Pt/C in direct methanol fuel cells, which may be attributed to palladium's inactivity to methanol electro-oxidation while exhibiting good performance to oxygen reduction reaction.     

Novel synthesis of highly active Pt/C cathode electrocatalyst for direct methanol fuel cell

A 40 wt% Pt/C cathode electrocatalyst with controlled Pt particle size of approximately 2.9 nm showing better performance than commercial catalyst for direct methanol fuel cell was prepared by a polyol process with water but without using stabilizing agent.     

Synthesis of main‐chain poly(carbazole)s via CuAAC

The synthesis and characterization of a novel family of main‐chain carbazole‐containing polymers using copper‐catalyzed azide‐alkyne cycloaddition chemistry is reported. The reactions were performed under mild conditions using readily available copper catalysts and ligands, which afforded polymeric products with M_ws up to 18 kDa. Using a range of techniques, the polymers were found to exhibit a glass transition temperature (T_g) of 85 °C, high thermal stability (T_d = 274 °C), and high photoluminescent quantum efficiency (?_f = 0.29; λ_em = 448 nm), which underscore their potential for use in organic light‐emitting diodes or other emissive devices, particularly where efficient blue emission is of value. The approach described offers practical advantages over other synthetic methods used to prepare main‐chain carbazole‐containing polymers, especially with regard to the lack of need for rigorously inert conditions and the absence of byproducts generated during the polymerization reaction. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Mode decomposition of a noise suppressed mixing layer

Noise is generated in atwo-dimensional mixing layer due to the growing of instability waves and vortex pairings. The adjoint-based control methodology has shown to be arobust tool to suppress noise radiation. The mode decomposition algorithms such as the compressible versionof proper orthogonal decomposition (POD) and dynamic mode decomposition (DMD) are employed toanalyze thespatial/spatial-temporal coherent structures for a consecutive data sets of the controlled mixing layer and itsuncontrolled counterpart. The analyses of POD indicate that the y-direction body forcecontrol mainly modify themost energetic spatialstructures, and increase the uniformity of the flow. The analyses of DMD show us prevalent frequencies andcorresponding mode structures, and the stability characteristics of each mode can be obtained fromDMD-spectrum. The spectral signatures illustrate that a lot of neutral/slightly damping modesemerging in uncontrolled flow within the frequency range (ω < 0.4) are suppressed due to control, relevant spatial-temporal structures are also varied, which iscoincident with the change of far-field noise spectra. From the view of mode decomposition, the action of control redistribute the energy forfrequency components of ω < 0.4 by weakening nonlinearities and regularizing corresponding dynamicstructures in streamwise direction, and thus suppress the noise radiation. Moreover, the POD- and DMD-analysis in this studydemonstrate that DMD can serve as an important supplement for POD in analyzing a time-resolved physicalprocess.     

One Pot Synthesis of Amphiphilic Hyperbranched Poly-(amino ester)and Its Dynamic Surface Activity

Amphiphilic hyperbranched poly(amino ester)s with hydrophilic multi‐ethoxylated triacrylate backbone and hydrophobic long alkyl side chain were firstly synthesized via one pot Michael addition polymerization. The poly‐(amino ester) could dissolve in cold water and self‐assemble into loose micelle. Under 50–1000 ms bubble, the dynamic surface tension (DST) of the poly(amino ester) aqueous solution (0.5 wt%) still maintained in the range of 32–28 mN/m. The aqueous solutions of poly(amino ester)s with different molecular weights showed the lower critical solution temperature (LCST) in the range of 8–50°C, which could also be tuned by its pH. Capped with hydrophobic groups on the terminal units and partially neutralized with acid, the poly(amino ester)s still kept their stable dynamic surfactant behaviors, indicating promising application.     

Effect of Hydrogen on Catalytic Coupling Reaction of Carbon Monoxide to Diethyl Oxalate

The kinetics of hydrolysis of tetrahydrozoline hydrochloride in aqueous solution at 353, 363 and 368 K in the pH-range from 2.00 to 12.20 has been investigated. The decomposition products have been investigated by HPLC. This revised version was published online in June 2006 with corrections to the Cover Date.