Triplet pairing states with equal spins in ferromagnet/superconductor heterojunctions for noncollinear magnetizations

Four-component Bogoliubov-de Gennes equations are applied to study tunneling conductance spectra of ferromagnet/ferromagnet/d-wave superconductor (F₁/F₂/d-wave S) tunnel junctions and to find out signs of spin-triplet pairing correlations induced in the proximity structure. The pairing correlations with equal spins arises from the novel Andreev reflection (AR), which requires at least three factors: the usual AR at the F₂/S interface, spin flip in the F₂ layer, and superconducting coherence kept up in the F₂ layer. Effects of angle α between magnetizations of the two F layers, polarizations of the F₁ and F₂ layers, the thickness of the F₂ layer, and the orientation of the d-wave S crystal on the tunneling conductance are investigated. A conversion from a zero-bias conductance dip at α = 0 to a zero-bias conductance peak at a certain value of α can be seen as a sign of generated spin-triplet correlations.     

Improved optical single-sideband generation using the self-modulation birefringence difference in semiconductor optical amplifiers

By employing the self-modulation birefringence difference in a semiconductor optical amplifier (SOA), an improved method is proposed to generate a complete optical single-sideband (OSSB) signal. Over 30 dB sideband suppression ratios (SSRs) of lower OSSB signals are obtained over a 12 dB input power range and a 36 nm wavelength span, with a maximum of over 35 dB. Upper OSSB signals with an SSR of over 15 dB are observed using a SOA for what is believed to be the first time. This method is effective even for the carrier-suppressed signal. The theory for OSSB generation in an SOA is extended and verified by experiment.     

Schematic design of a complex thin-film luminescent screen usable for vacuum fluorescent and field emission display

Based on the facts related to solid-state cathodoluminescence, mixed excitation, and serial excitation recently discovered in our laboratory, a fundamental schematic design and a series of different schematic elaborated designs are proposed for protection from electron accumulation, reasonable use of a luminescent screen, and enhancement of light intensity.     

Effect of Protective Measures on Eye Exposure to Solar Ultraviolet Radiation

In this study, ocular biologically effective exposure to solar ultraviolet radiation (UVBE) is investigated with six kinds of sun protective measures (spectacle lenses, sunglasses, cap, bonnet, straw hat and under parasol). Ocular UV exposure measurements were performed on manikins during the summer period in Shenyang city (41.64° N, 123.50° E, 66 m a.s.l.), China. The measurements include the ocular UV exposure of an unprotected eye and the ambient UV as a control concurrently. Based on the relative spectral weighting factors of the International Commission on Non‐Ionizing Radiation Protection (ICNIRP), the ocular biologically effective UV is calculated and compared with the 8‐h exposure limits of ICNIRP (30 J m^?2). The UV index (UVI) of the measurement days is 0–8, and the 8‐h (8:00–16:00 China Standard Time, CST) cumulated UVBE of the unprotected eye is 452.0 J m^?2. The 8‐h cumulated UVBE of the eye with spectacle lenses, sunglasses, cap, bonnet, straw hat and under parasol are 364.2, 69.1, 51.4, 49.0, 56.8 and 110.2 J m^?2, respectively. Importantly, it should be noted that the eye could be exposed to risk despite protective measures. The 8‐h cumulated UVBE of the eye with protection is ca 1.6–15.1 times the exposure limit, respectively. As indicated in the present study, during summer months, high exposure to the sun for more than 30 min without eye protection and more than 1 h with eye protection is not advisable. The protection measures could effectively reduce the UVBE reaching the eye, yet there is still a high degree of risk when compared with the ICNIRP 8‐h exposure limits.     

BirA*-protein A fusion protein based BioEnhancer amplifies western blot immunosignal

Western blot (protein immunoblot) is a widely used analytical technique in molecular biology. Utilizing the specific recognizing primary antibody, proteins immobilized on various matrix are investigated by subsequent visualization steps, for example, by the horse radish peroxidase conjugated secondary antibody incubation. Methods to improve the sensitivity in protein identification or quantification are appreciated by biochemists. Herein, we report a new strategy to amplify Western blot signals by constructing a probe with proximal labeling and IgG targeting abilities. The R118G mutation attenuated the biotin-AMP binding affinity of the bacterial biotin ligase BirA*, offering a proximity-dependent labeling ability, which could be used as a signal amplifier. We built a BirA*-protein A fusion protein (BioEnhancer) that specifically binds to IgG and adds biotin tags to its proximal amine groups, enhancing the immunosignal of target proteins. In our experiments, the BioEnhancer system amplified the immunosignal by tenfold compared to the standard western blot. Additionally, our strategy could couple with other signal enhancement methods to further increase the western blot sensitivity.     

低功率超声增强碘帕醇氯氧化的效果和路径

研究了低功率超声(US, <38 W)对NaClO氧化非离子型碘代X射线造影剂—碘帕醇(IPM)的增强作用及机理, 考察了NaClO添加浓度和超声功率的影响, 分析并计算了体系中的主要活性物种及其贡献. 采用高效液相色谱/串联质谱(HPLC/MS/MS)对降解产物进行分析, 推测IPM的降解路径. 结果表明, 低功率US显著增强了NaClO对IPM的氧化效果, 在25 ℃, pH=5.8, NaClO浓度为0.12 mmol/L条件下, 10 mg/L IPM在60 min的降解率达到85.8%. 其中NaClO氧化、 HO·和活性氯自由基(RCSs)是US/NaClO增强IPM降解的主要原因, 自由基分析计算它们的贡献率分别为15.82%, 4.65%和79.53%. NaClO浓度在0~0.24 mmol/L范围内, IPM的降解率随NaClO浓度升高而增加, 60 min后降解率由4.75%增加到91.12%; 超声功率为28.5 W, 降解率达到最高. 在 15~45 ℃温度范围内, IPM的降解过程符合表观一级反应动力学, 反应活化能(E_a)为59.03 kJ/mol. HPLC/MS/MS共检测出5种中间产物, 结合密度泛函理论(DFT)计算结果, 初步推测了IPM在US/NaClO体系中的降解途径和机理.     

肝素非还原端饱和结构的紫外吸收研究及在肝素寡糖测序中的应用

为了进一步探讨非还原端饱和结构的肝素寡糖在UV 232 nm的吸收情况, 制备了4种饱和结构的肝素二糖, 并用离子对反相液相色谱/离子阱飞行时间质谱(RPIP-LC/MS-IT-TOF)光电二极管阵列检测器分析了它们在UV 232 nm的吸收情况. 分析结果表明, 饱和结构的肝素二糖在UV 232 nm的检出限为9 μg(S/N=10), UV 232 nm/UV 206 nm约为不饱和结构肝素二糖UV 232 nm的7%~40%. 结果还表明, 肝素二糖UV 232 nm的吸收强度受亚硫酸基团(SO₃^2?)影响较大. 另外, 通过比较不饱和结构的肝素/硫酸类肝素(Hep/HS)标样二糖发现, 含N-未取代葡萄糖胺(GlcNH₃⁺)基团的二糖在UV 232 nm的吸收值较低. 最后, 通过简单的UV检测方法, 结合 HNO₂(pH=4.0)裂解法和RPIP-LC/MS-IT-TOF分析, 简化了含GlcNH₃⁺肝素六糖的测序方法. 本研究为以后用 HNO₂(pH=1.5)裂解法对混合组分N-硫酸化的肝素寡糖结构序列分析提供了可能.     

多种纳米结构Fe掺杂TiO2光热耦合水分解制氢研究

氧空位是材料缺陷工程的重要组成. 基于光生氧空位的直接热利用, 实现纯水分解制氢的光热耦合实验, 被认为是太阳能综合利用的有效途径. 以多种制备方法合成的TiO₂纳米材料为基础, 研究了多种形貌纳米TiO₂及其Fe掺杂改性材料的光热耦合反应能力. 通过高分辨透射电子显微镜(HRTEM)、 X射线衍射(XRD)和电子顺磁共振(EPR)对晶体特征进行表征, 利用漫反射光谱(DRS)、 光致发光(PL)和三电极测试法表征了材料的性能, 并结合密度泛函理论(DFT)计算了产氢反应路径. 研究结果表明, 溶胶-凝胶法制备的纳米颗粒相比水热法制备的纳米片及纳米线, 体相内缺陷较多, 载流子强度高, 光热耦合产氢效果较差. Fe掺杂改性扩展了光响应, 增强了载流子分离和寿命, 降低了电子传输阻抗, 利于光反应过程中光生氧空位的形成, 克服了制氢反应中的关键能垒. 同时, 纳米材料中的缺陷促进了Fe离子的有效掺杂, Fe掺杂TiO₂纳米颗粒的光热耦合平均产氢量为9.73 μmol/g, 性能提升达13倍.     

三功能策略设计制备具有优异低温抗积碳性能的Ni-CeO2@SiO2催化剂催化甲烷干重整反应

随着全球人为温室气体排放量(主要是甲烷和二氧化碳)的增加,全球变暖的趋势逐渐增加,因此,迫切需要通过各种技术来捕获和利用这些温室气体.甲烷干气重整反应(DRM)可以有效地将甲烷和二氧化碳这两种资源丰富、价格低廉的温室气体转化为高附加值化学品,减少它们向大气排放.尽管DRM工艺的应用具有许多优势,但是反应期间碳沉积和活性组分的烧结是阻碍其工业应用的两个主要原因.这些碳沉积物可能覆盖活性中心或阻塞催化剂的孔道,从而导致催化剂活性降低.镍基催化剂因其价格低廉、初始活性高和资源丰富而得到广泛的应用.但应用于DRM反应的Ni基催化剂在反应中容易烧结和积碳,导致催化剂迅速失活.为解决上述问题,本文从三功能策略角度出发,即SiO2壳层的限域作用和Ni-Ce之间的协同作用以及CeO2的消除积碳作用,采用原位一锅法设计合成了一种限域型Ni-CeO2核壳结构催化剂(Ni-CeO2@SiO2).通过X射线衍射、透射电子显微镜、能量色散X射线光谱、N2吸附/脱附、氢气程序升温还原和脱附、氧气程序升温脱附、拉曼光谱、热重分析和原位漫反射红外傅里叶变换光谱测试对催化剂进行了系统的表征,来揭示催化剂的理化性质和反应机理.催化剂应用于甲烷干气重整反应结果表明,在温度区间为550～800℃时,与传统浸渍法合成的催化剂相比,Ni-CeO2@SiO2催化剂具有更高的活性.高温800℃下的稳定性测试结果显示,传统浸渍法合成的催化剂在反应20 h后就出现了大量的积碳且活性下降明显;而Ni-CeO2@SiO2催化剂在800℃下反应100 h后未检测到积碳,并且催化剂中的Ni纳米颗粒的平均粒径从5.01 nm仅增长到5.77 nm,表现出很好的高温抗积碳和耐烧结性能.值得注意的是,Ni-CeO2@SiO2催化剂在低温600℃(形成碳沉积的最可能温度区域)下反应20h后也未检测到积碳的形成,表现出催化剂良好的低温稳定性和抗积碳性能.这可能归因于对Ni-CeO2@SiO2催化剂的三功能作用,即多孔二氧化硅壳层的限域作用、Ni与CeO2之间强的金属-金属氧化物相互作用以及具有丰富活性氧物种CeO2的消除积碳的作用.通过原位漫反射红外傅里叶变换光谱测试来探究反应机理.结果 表明,DRM反应在Ni-CeO2@SiO2催化剂上遵循L-H机理,添加CeO2可以消除碳沉积并促进CO2活化.该三功能策略为设计其他应用于DRM的高性能催化剂提供了指导,有望加快该工艺的工业化.     

通过"双离子键"固载于季鏻盐聚合物的[Rh(CO)I3]2–物种在多相乙醇羰基化中的应用

贵金属物种(Rh或Ir络合物)在均相羰基化和氢甲酰化催化过程得到了广泛的应用,但始终存在分离繁琐等问题,其均相多相化可很大程度上简化分离操作,故一直广受重视.单位点催化剂因其具有可与均相相比拟的较高金属利用率和选择性而成为均相多相化的重要研究方向之一.研究发现,在碘物种存在的情况下用于固载金属物种的配位键容易断裂,进而导致金属物种的流失,而通过离子键固载的[Rh(CO)₂I₂]^–物种更加稳定,比如著名的甲醇羰基化“Acetica^TM”工艺中,[Rh(CO)₂I₂]^–负一价阴离子物种是以离子键的方式固定在带有阳离子骨架的甲基化聚乙烯吡啶树脂上.与甲醇羰基化过程类似的乙醇羰基化过程是生产重要化工中间体丙酸的主要途径之一,但该过程的均相多相化始终存在着稳定性差这一关键问题.为了解决这一问题,基于之前将固载于季鏻盐聚合物的[Rh(CO)I₃]^2–应用于甲醇羰基化的工作,我们将类似的季鏻盐聚合物固载Rh基催化剂Rh-TPISP用于多相乙醇羰基化过程,通过多种表征进一步证明了Rh物种和P物种结构,并提出了“双离子键”模型.P的K边XANES证明了聚合物TPISP的季鏻化阳离子骨架特征.HAADF-STEM测试表明Rh-TPISP中的Rh呈现单位点分散的状态.Rh的XPS和XANES结果证明了Rh-TPISP中Rh物种的价态介于0~+1.通过EXAFS的拟合解析给出了[Rh(CO)I₃]^2–活性中心结构.由于[Rh(CO)₂I₂]^–为经典的羰基化活性中心,为了进一步证明该结构的正确性,我们将Rh-TPISP的EXAFS和IR谱图与标样[PPh3Et]⁺[Rh(CO)₂I₂]^–对比发现:在EXAFS谱图中,Rh-TPISP中的Rh-C峰高低于[PPh3Et]+[Rh(CO)₂I₂]^–的Rh-C峰高,而Rh-TPISP中的Rh-I峰高高于[PPh3Et]+[Rh(CO)₂I₂]^–的Rh-I峰高,这就说明Rh-TPISP中Rh物种的Rh-C配位数小于2,而Rh-I配位数大于2;在IR谱图中,标样[PPh3Et]+[Rh(CO)₂I₂]^–中有两个羰基振动峰,与该物种的两个Rh-C配位键相符,而Rh-TPISP中的只有一个羰基振动峰,说明Rh-C配位数为1.因此,Rh-TPISP催化剂的季鏻盐骨架中的每个P物种带有一个正电荷,每个带有两个负电荷的[Rh(CO)I₃]^2–通过与两个[P]⁺的静电作用进行固载,形成“双离子键”结构.该催化剂在固定床乙醇羰基化过程中表现出优异的羰基化活性、选择性和稳定性.在3.5 MPa、195 oC反应近1000 h后,Rh-TPISP催化剂TOF保持在约350 h–1,丙酰基选择性为95%以上,高出所有文献报道的均相和多相乙醇羰基化活性.其较高的活性主要是因为[Rh(CO)I₃]^2–比传统Rh活性相[Rh(CO)₂I₂]^–具有更强的富电子性,而较高的稳定性主要是由于“双离子键”这种强静电作用比“AceticaTM”工艺中“单离子键”更有利于Rh物种的固载.故Rh-TPISP催化剂中的“双离子键”对其优异的催化性能具有极其重要的作用,对后续多相乙醇羰基化的发展具有重要意义.