Growth of cubic MgxZn1−xO alloy films by electron beam evaporation

We report the growth of cubic Mg_xZn_1−xO alloy thin films on quartz by electron beam evaporation. It can be found that all the samples have sharp absorption edges by the absorption measurements. X-ray diffraction measurements indicate the Mg_xZn_1−xO films are cubic phase with preferred orientation along the (1 1 1) direction. Energy dispersive spectrometry (EDS) demonstrates that the Mg concentration in Mg_xZn_1−xO films is much higher than the ceramic target used, and the composition can be tuned in a small scope by varying the substrate temperature and the beam electric current. The reasons of this phenomenon are also discussed.     

Neutron-spin resonance in the optimally electron-doped superconductor Nd1.85Ce0.15CuO4-delta

We use inelastic neutron scattering to probe magnetic excitations of an optimally electron-doped superconductor Nd1.85Ce0.15CuO4-delta above and below its superconducting transition temperature Tc=25 K. In addition to gradually opening a spin pseudogap at the antiferromagnetic ordering wave vector Q=(1/2,1/2,0), the effect of superconductivity is to form a resonance centered also at Q=(1/2,1/2,0) but at energies above the spin pseudogap. The intensity of the resonance develops like a superconducting order parameter, similar to those for hole-doped superconductors and electron-doped Pr0.88LaCe0.12CuO4. The resonance is therefore a general phenomenon of cuprate superconductors, and must be fundamental to the mechanism of high-Tc superconductivity.     

Novel long-pulse TE CO2 laser excited by pulser–sustainer discharge

A novel long-pulse TE CO₂ laser with UV-preionization is presented. With an active volume of 1.17 l and gas pressure of 30 kPa, the laser can discharge stably with low pulser energy and high sustainer energy. Various long-pulse discharges such as 12, 20 or 25 μs are demonstrated. At discharge pulse width of 23.9 μs, maximum output laser energy of 6.8 J is obtained at an efficiency of 9.0%.     

Generalized beam propagation factor of hard-edged circular apertured diffracted Bessel–Gaussian beams

Based on the truncated second-order moments method on the cylindrical coordinate systems and the incomplete gamma function, an analytical expression of the generalized beam propagation factor (M_G² factor) of hard-edged circular apertured diffracted Bessel–Gaussian beams is derived and illustrated numerically. It is shown that the M_G² factor of hard-edged diffracted BGBs mainly depends on the truncation parameter δ and the beam parameters m and η. The results can be reduced to that for the non-truncated Bessel–Gaussian beams case and that for the truncated fundamental Gaussian beams case under certain conditions, respectively. The power fraction is also discussed analytically and numerically.     

Watermarks encrypted in the cascaded Fresnel digital hologram

A cascaded Fresnel digital hologram (CFDH) is proposed, together with its mathematical derivation. Its application to watermarking has been demonstrated by a simulation procedure, in which the watermark image to be hidden is encoded into the phase of the host image. The watermark image can be deciphered by the CFDH setup, the reconstructed image shows good quality and the error is almost closed to zeros. Compared with previous technique, this is a lensless architecture, which minimizes the hardware requirement.     

Discrete channel modelling based on genetic algorithm and simulated annealing for training hidden Markov model

Hidden Markov models (HMMs) have been used to model burst error sources of wireless channels. This paper proposes a hybrid method of using genetic algorithm (GA) and simulated annealing (SA) to train HMM for discrete channel modelling. The proposed method is compared with pure GA, and experimental results show that the HMMs trained by the hybrid method can better describe the error sequences due to SA's ability of facilitating hill-climbing at the later stage of the search. The burst error statistics of the HMMs trained by the proposed method and the corresponding error sequences are also presented to validate the proposed method.     

Calculation of electric fields induced by body and head motion in high-field MRI

In modern magnetic resonance imaging (MRI), patients are exposed to strong, nonuniform static magnetic fields outside the central imaging region, in which the movement of the body may be able to induce electric currents in tissues which could be possibly harmful. This paper presents theoretical investigations into the spatial distribution of induced electric fields and currents in the patient when moving into the MRI scanner and also for head motion at various positions in the magnet. The numerical calculations are based on an efficient, quasi-static, finite-difference scheme and an anatomically realistic, full-body, male model. 3D field profiles from an actively shielded 4T magnet system are used and the body model projected through the field profile with a range of velocities. The simulation shows that it possible to induce electric fields/currents near the level of physiological significance under some circumstances and provides insight into the spatial characteristics of the induced fields. The results are extrapolated to very high field strengths and tabulated data shows the expected induced currents and fields with both movement velocity and field strength.     

Ultrasonic transducers using electron-irradiated vinylidene fluoride-trifluoroethylene copolymers

Single-element, planar transducers have been fabricated using electron-irradiated poly(vinylidene fluoride-trifluoroethylene) 80/20 mol% copolymers with different electron dosage. Electrical field-induced strain response of copolymer film with 100 Mrad dosage has been studied at 5 kHz and the electrostrictive coefficient was calculated. The transmitting response of the air-backing and epoxy-backing transducers was evaluated with the application of high DC bias voltages. Clear ultrasonic amplitudes and high frequency spectrum (>20 MHz) were observed when driven from a standard ultrasonic voltage source through a decoupling circuit. It has also showed that larger generation of ultrasonic waves will be induced under high DC bias field, which is due to the increase of induced d(33) piezoelectric coefficient. Two different polar bias voltages, positive and negative, were applied to the transducers and inverse waveforms were received, which was coincident with the theoretical analysis of the strain response of electrostrictive film.     

甚高频等离子体增强化学气相沉积制备微晶硅太阳电池的研究

采用甚高频等离子体增强化学气相沉积技术成功地制备了不同硅烷浓度和辉光功率条件下的微晶硅电池.电池的J-V测试结果表明：在实验的硅烷浓度和功率范围内，随硅烷浓度的降低和功率的加大，对应电池的开路电压逐渐变小；硅烷浓度的不同对电池的短路电流密 度有很大的影响，但功率的影响在实验研究的范围内不是很显著.对于微晶硅电池，N层最好 是非晶硅，这是因为一方面可以降低对电流的横向收集效应，另一方面也降低了电池的漏电概率，提高了电池的填充因子. 关键词： 微晶硅太阳电池 甚高频等离子体增强化学气相沉积     

LD泵浦Nd:YAG微片激光器

ＬＤ泵浦Ｎｄ：ＹＡＧ微片激光器结构简单紧凑，与半导体激光器相比，前者具有激光线宽窄、光束质量好、相干长度长等优点，因此在一些测量领域有着较好的应用前景。目前对ＬＤ泵浦Ｎｄ：ＹＡＧ微片激光器的实验工作主要是获得单频、单模连续输出和线性频率调制特性研究。本文综述了近几年来ＬＤ泵浦Ｎｄ：ＹＡＧ微片激光器的研究方向、成果及应用，主要介绍了各国对ＬＤ泵浦Ｎｄ：ＹＡＧ微片激光器的调频特性的研究状况