Silver(I) 1,3-butadiynediide and two related silver(I) double salts containing the C4(2-) dianion

Ag2C4, the second silver carbide to be fully characterized, has been synthesized as a light-gray powder (contaminated with metallic silver) that is explosive at high temperature (130 degrees C) and sensitive to mechanical shock, rather like the well-known prototype Ag2C2. In the pair of hydrated double salts Ag2C4.6AgNO3.nH2O (n = 2, 3), the nearly linear, centrosymmetric 1,3-butadiyne-1,4-diyl dianion C42-exhibits an unprecedented mu8-coordination mode, each terminal being capped by four sigma-bonded silver(I) atoms with pi-interaction to one of them.     

Synthesis of Polyacrylaminothiourea Chelating Fiber and Properties of Concentration and Separation of Trace Noble Metal Ions from Samples

A novel polyacrylaminothiourea chelating fiber was synthesized simply and rapidly from nitrilon (an acrylonitrile-based synthetic fiber), which was applied to preconcentrate and separate of trace amount of Au(Ⅲ）,Pt(Ⅳ）,Pd(Ⅳ） and Ir (Ⅳ） ions from solution of samples.The analyzed ions can be quantitatively concentrated by the fiber up to a flow rate of 20.0mL/min at pH2, and can also be desorbed with 15 mL of 4mol/L HCl 3% thiourea from the fiber column with recoveries of 96.5%-100%.The chelating fiber can be reused for ten times,the recoveries of these ions are still over 92%,and hundred to thousand times of excess of Fe(Ⅲ）,Al（Ⅲ）,Ca(Ⅱ），Mg（Ⅱ）,Ni(Ⅱ）,Mn（Ⅱ),Cu(Ⅱ），Zn(Ⅱ），and Cd(Ⅱ） cause no interference on the determination of the analyzed ions by inductively-coupled plasma atomic emission spectrometry (ICP-AES).The static saturation adsorption capacities of the fiber for the analytes are in the range of 1.15-2.80mmol/g.The relative standard deviations for the determination of 20.0ng/mL each of Au(Ⅲ）,Pt(Ⅳ）,Pd(Ⅳ）and Ir(Ⅳ） are in the range of 0.7%-3.0%.The recoveries for test from standard additions to real solution samples are between 96% and 100%.The concentration of each ion in powder sample detected by the method is in good agreement with the certified value.     

微铂电极上1-酰基二茂铁动力学参数的测定

本文合成并研究了１－酰基二茂铁在ＣＨ２Ｃｌ２中的伏安行为，测定了它们在ＣＨ２Ｃｌ２中不同支持电解质浓度时的扩散系数，并分明用Ｚ．Ｇａｌｕｓ和Ｋ．Ａｏｋｉ方法计算了两种状态下的电子迁移速率常数。讨论了取代基的诱导效应和共轭效应及其链长对１－酰基二茂铁的动力学性质的影响以及支持电解质及其浓度等因素对伏安曲线的影响。     

Keggin类杂多化合物催化α,β-不饱和羰基化合物环氧化

在乙睛溶剂中考察了一系列杂多化合物和过氧化氢水溶液催化的各种缺电子的α,β-不饱和羰基化合物的环氧化反应.在所研究的杂多化合物中,二缺位的[γ-SiW10(H2O)2O34](Bu4N)4显示出了最高的活性.     

烷基和烷基苯磺酸钠系列的反相高效液相色谱法

用移动相中含有磷酸二氢钠的反相高效液相色谱法分析了烷基磺酸钠和烷基苯磺酸钠。对前者用电导检测器直接进行检测(无抑制柱),后者用紫外检测器检测。对几种商品十二烷基苯磺酸钠的组分和微乳液中十二烷基磺酸钠的含量进行了测定。得到了满意的结果。     

Vibrational circular dichroism: a new spectroscopic tool for biomolecular structural determination

Vibrational circular dichroism (VCD) in the past two decades has developed into a powerful new structural tool. A concise review of the applications of VCD to determine the structures of various biological molecules, namely peptides and proteins, nucleic acids and carbohydrates, is provided.     

分子筛模型中非骨架离子位置的研究

从理论上研究了非骨架阳离子可能的分布位置．计算了分子筛晶体基本结构单元在整个空间的静电势分布，找出空间中静电势的各个极小点．在静电势最低点逐个放置钠离子，优化，重新计算模型分子筛的电势分布．研究了阳离子放置过程中静电势变化的趋势．     

Direct melting polycondensation and characterization of poly(ɛ-caprolactone-co-lactic acid)

A kind of biodegradable material, poly(ɛ-caprolactone-co-lactic acid) [P(CL-co-LA)] was synthesized via the direct melting polycondensation of lactic acid (LA) and ɛ-caprolactone (CL). The influences of the polycondensation time, and the catalyst type on the intrinsic viscosity of P(CL-co-LA) were also investigated. The results indicate that P(CL-co-dl-LA), with an intrinsic viscosity of 0.4733 dL/g, can be prepared by direct melting polycondensation with the molar ratio LA/CL = 3:7 at 180°C and 70 Pa for 12 h, using 0.5% (mass fraction) of SnCl₂ as the catalyst. Compared with lactide ring-opening polycondensation (ROP), the direct melting polycondensation of LA and CL is more practicable and simple. Translated from Journal of South China University of Technology, 2006, 34(7): 7–11 (in Chinese)     

TiO(2) porous electrodes with hierarchical branched inner channels for charge transport in viscous electrolytes.

Titanium dioxide (TiO(2)) photoelectrodes with micro/nano hierarchical branched inner channels have been prepared by an electrohydrodynamic (EHD) technique and assembled to form dye-sensitized solar cells (DSSCs). Excellent penetration of ionic-liquid electrolytes and enhanced light harvesting in the longer wavelength region are realized within the composite-structure electrode, thus a better fill factor (ff) of 75.3 % and higher conversion efficiency (eta) of 7.1 % are obtained for viscous ionic-liquid electrolytes compared to pure nanostructured films. Hierarchical branched channels in the photoanodes can efficiently improve the transport properties of redox-active species in viscous electrolytes, which is demonstrated by electrical impedance spectroscopy (EIS). The incident monochromatic photon-to-electron conversion efficiency (IPCE) shows that enhanced light scattering in the composite film is of benefit for light harvesting and thus for solar energy conversion efficiency.     

High-throughput purification of combinatorial libraries I: a high-throughput purification system using an accelerated retention window approach

We have developed a high-throughput purification system to purify combinatorial libraries at a 50-100-mg scale with a throughput of 250 samples/instrument/day. We applied an accelerated retention window method to shorten the purification time and targeted one fraction per injection to simplify data tracking, lower QC workload, and simplify the postpurification processing. First, we determined the accurate retention time and peak height for all compounds using an eight-channel parallel LC/UV/MS system, and calculated the specific preparative HPLC conditions for individual compounds. The preparative HPLC conditions include the compound-specific gradient segment for individual compounds with a fixed gradient slope and the compound-specific UV or ELSD threshold for triggering a fraction collection device. A unique solvent composition or solvent strength was programmed for each compound in the preparative HPLC in order to elute all compounds at the same target time. Considering the possible deviation of the predicted retention time, a 1-min window around the target time was set to collect peaks above a threshold based on UV or ELSD detection. Dual column preparative instruments were used to maximize throughput. We have purified more than 500 000 druglike compounds using this system in the past 3 years. We report various components of this high-throughput purification system and some of our purification results.