Porous WO3 from anodized sputtered tungsten thin films for NO2 detection

In this paper, porous WO₃ films were prepared by anodic oxidation of metallic tungsten (W) films deposited on alumina substrates. The structural and morphological properties of the porous WO₃ films were investigated using field emission scanning electron microscope (FESEM) and X-ray diffraction (XRD). A large number of cracks appeared on the surface of films after anodization, which makes the films porous. The porous WO₃ sensors achieved their maximum response values to NO₂ at a low operating temperature of 150 °C. The porous WO₃ sensors showed high response values, great stability and fast response-recovery characteristics to different concentration of NO₂ gas due to the high specific surface area and special structural and morphological properties.     

Faithful teleportation of multi-particle states involving multi spatially remote agents via probabilistic channels

We present an approach to faithfully teleport an unknown quantum state of entangled particles in a multi-particle system involving multi spatially remote agents via probabilistic channels. In our scheme, the integrity of an entangled multi-particle state can be maintained even when the construction of a faithful channel fails. Furthermore, in a quantum teleportation network, there are generally multi spatially remote agents which play the role of relay nodes between a sender and a distant receiver. Hence, we propose two schemes for directly and indirectly constructing a faithful channel between the sender and the distant receiver with the assistance of relay agents, respectively. Our results show that the required auxiliary particle resources, local operations and classical communications are considerably reduced for the present purpose.     

能动磨盘变形检测中的各误差因素分析

针对现有f530 mm能动磨盘的检测系统（有效检测口径f420 mm）,系统分析了检测过程中的球头误差、传感器安装角度误差和坐标定位误差,并给出了各项误差对检测精度的影响。同时,还针对检测基座不完全水平的问题建立模型,应用最小二乘法实现了检测数据的去倾斜处理。给出了实测数据去倾斜前后和误差补偿前后的检测精度对比情况,结果表明去倾斜算法能较好地还原实测数据,补偿检测中的系统误差有助于提高检测精度。     

室温磁制冷主动式磁蓄冷器数值模拟

提出了一个研究工作参数、设计参数对主动式磁蓄冷器(AMR)制冷性能影响的数值模型。三个主要参数包括:质量流量m、频率f、蓄冷器孔隙率ε,被用来表征AMR的制冷能力。数值模拟的结果表明:对一个AMR而言,存在一个最佳孔隙率;在某一确定孔隙率条件下,AMR存在最佳换热流体质量流量和最佳工作频率;与高频相比,AMR在较低频率下有更好的制冷性能,一味提高频率并不一定能提高AMR的制冷量。模拟结果对磁制冷样机的设计、工作参数的选择有很大的指导意义。     

聚变实验堆真空室壳体成型残余应力分析

为了了解聚变实验堆真空室壳体表面残余应力的分布以及退火工艺对残余应力的影响,通过模拟分析和实验检测两种方式对不锈钢316LN冷压曲面和热压曲面残余应力进行研究,获得退火前后曲面表面残余应力的大小,得到冷压曲面和热压曲面残余应力的分布以及退火工艺对残余应力分布的影响。研究结果为分析成型工艺提供数据支撑,对中国聚变工程实验堆真空室的研究与制造具有重要意义。     

Analysis of the mechanisms of electron recombination in HgCdTe infrared photodiode

This paper presents an experimental study of minority carrier lifetime and recombination mechanisms in HgCdTe photodiode. The excitation light source is a wavelength-tunable pulsed infrared laser. A constant background illumination has been introduced to minimize the effect of the junction equivalent capacitor and resistance. The decay of the photo-generated voltage is recorded by a storage oscilloscope. By fitting the exponentially decay curve, the time constant has been obtained which is regarded as the photo-generated minority carrier lifetime of the HgCdTe photodiode. The experimental results show that the carrier lifetime is in the range of 18–407 ns at 77 K for the measured detectors of four Cd compositions. It was found that the Auger recombination process is more effective for low Cd composition while the radiative recombination process became more important for high composition materials. The Shockley–Read–Hall recombination processes could not be ignored for all Cd composition.     

周期脉冲作用下Logistic映射的复杂动力学行为及其分岔分析

研究了两种周期脉冲作用下Logistic映射的复杂动力学行为. 随着参数的变化, 该系统产生平衡解、周期解、混沌等现象, 且该系统可经级联倍周期分岔到达混沌. 通过构造Poincaré 映射, 对周期脉冲作用下Logistic映射进行了分岔分析. 最后基于Floquet理论揭示了该系统周期解的分岔机理. 关键词： Logistic映射 脉冲 周期解 分岔机理     

A memristor oscillator based on a twin-T network

A novel inductance-free nonlinear oscillator circuit with a single bifurcation parameter is presented in this paper. This circuit is composed of a twin-T oscillator, a passive RC network, and a flux-controlled memristor. With an increase in the control parameter, the circuit exhibits complicated chaotic behaviors from double periodicity. The dynamic properties of the circuit are demonstrated by means of equilibrium stability, Lyapunov exponent spectra, and bifurcation diagrams. In order to confirm the occurrence of chaotic behavior in the circuit, an analog realization of the piecewise-linear flux-controlled memristor is proposed, and Pspice simulation is conducted on the resulting circuit.     

非本征型法布里-珀罗干涉仪光纤布拉格光栅应变温度传感器及其应用

介绍了光纤布拉格光栅非本征型法布里珀罗干涉仪集成复用传感器的结构、应变和温度同时监测的原理 ;观察到光纤布拉格光栅反射谱和非本征型法布里珀罗干涉仪干涉谱间的串扰 ,用 3dB带宽平均波长法减小了该串扰 ,提高了测量精度 ;将该传感器应用于三维编织复合材料的应变及温度同时监测。实验结果表明温度精度为± 1℃ ,应变精度为± 2 0 μ ,可满足实际应用的要求