LD Pump Single-Longitudinal-Mode Nd：GdVO4/RTP Solid-State Green Laser

The single-longitudinal-mode Nd：GdVO4/RTiOPO4 （RTP） solid-state Green laser operation of a laser-diode （LD） end-pumped laser is realized by multi-cavities and a Brewster plate. The LD-pumped single-frequency green laser has been demonstrated by optimizing several parameters and a cavity length, with precise temperature controlling of Nd：GdV04, RTP and laser diode. When the incident pump power is 2 W at 808.4 nm, a single-frequency cw green laser at 532nm with output 210 m W is obtained, the optical-to-optical conversion efficiency is up to 10.5%.     

Relativistic Electromagnetic Solitary Wave in a Cylindrical Magnetized Plasma

In the presence of an applied static and uniform magnetic field, a cylindrical Kadomtsev-Petviashivili equation is derived for a relativistic electromagnetic solitary wave propagating in collisionless plasma consisting electrons, positrons, and ions in the case of weak relativistic limit. This equation is solved in a stationary frame to obtain explicit expression for the velocity, amplitude and width of solitons. The amplitude of the solitary wave has a maximum value at a critical αc of the ratio of the ion equilibrium density to the electron one, and it increases as the applied magnetic field becomes larger.     

加权微分建模的初步研究

加权建模是必要的,微分建模是重要的,把二者结合起来,进行加权微分建模既必要也重要.给出了常用模型的微分建模结果,讨论了加权建模中的计算和权重选择问题,探讨了加权微分建模的思路和方法,并结合典型数据验证了该方法的有效性和稳定性.象加权建模一样,加权微分建模的精度、实用价值等,是和权重确定得合理与否紧密相联;应先进行模拟,以与近期实际值或典型样本相差最小的参数所对应的模型为准.     

微分算子扰动问题的值域研究

本文研究作用在C2周期函数空间上的微分算子u→u″ g(u) ,其中g(u)为连续有界函数.我们将证明上述微分算子的值域限制在周期函数空间的“超曲面”中.     

Microstructure of laser melted Al18B4O33w/2024Al composite

The microstructure of a laser treated Al₁₈B₄O₃₃w/2024Al composite has been investigated using transmission electron microscope (TEM), low-angle (glancing angle) X-ray diffraction (XRD) techniques. Various surface microstructures were observed in the laser treated composite. The Al₁₈B₄O₃₃ whisker on the surface of the composite was decomposed during laser surface melting, various decomposition products were studied in the laser treated composite. Eutectic phases and the precipitation in the matrix of the composite with laser-treated were observed. The main phases detected in the molten zone were aluminum and decomposition products Al₂O₃. The effect of laser treatment on the hardness of the composite was also examined. A surface hardness of 400 Hv was noted.     

用板式电势差计测量电池的电动势和内阻实验的改进

分析了在“用板式电势差计测量电池的电动势和内阻”实验中 ,由于待测干电池的电动势和内阻在实验过程中均不为恒定值而引起的误差 ,依据电化学理论和电阻构成解释了实验现象 ,并给出了实验改进方案 .     

电磁学黑匣子实验的设计与解答Ⅱ--奥林匹克物理竞赛培训试题二

介绍了一个电磁学黑匣子实验，对其作了具体的解答，并提供多种解决方案，且指出了此题的特点和实验过程中可能出现的问题．     

Li(AlxCo1-x)O2晶体中Co3+电子态的变化及对结构演化的影响

研究了应用于锂二次电池正极的新型高能量密度存贮材料Li(AlxCo1-x)O2 (x=01—05)的磁性.发现Al3+的掺杂可导致Co3+中d电子自旋态发生变化，即有部分d电子进入高自旋态.伴随Co3+中电子状态的改变，材料结构演化也发生了相应变化，表现为c/a比增大明显减缓，较好地解释了材料结构对Vegard定律的正偏离.这对材料的微观结构与性能设计具有重要意义. 关键词： 锂电池材料 Li（AlxCo1-x）O2 磁性 自旋态 结构演化     

体效应振荡器特性观测与使用实验教学研究

探讨了体效应振荡器特性观测与使用实验中，编写实验原理要应用能带结构解释负阻特性并通过对偶极畴生长和运动过程的描述说明振荡原理，提出了实验教学方案，从教学效果上分析了开设此实验的意义及合理性。     

C2（a 3Πu）+NO 的反应机理研究

在G2 (CC ,MP2 )理论水平上研究了C2 (a3 Πu)自由基与NO分子的反应 .计算了反应体系最低二重态势能面上各驻点的构型参数、振动频率和能量 ,揭示了此反应存在两种反应机理 :由NO中的O原子进攻C2 自由基形成CCON中间体的CCON机理和NO中的N进攻C2 自由基形成CCNO中间体的CCNO机理 ,分析了对应与这两种反应机理的五个可能的反应通道 ,得出了由NO中的N原子进攻3 C2 自由基 ,生成中间体CCNO自由基 ,最终得到产物CN +CO的通道是最有利的通道 .