Synthesis and Magnetic Properties of Fe（Ⅱ） and Nd（Ⅲ） Complexes of Poly（N-2-thiazolylacrylamide）

N-2-Thiazolylacrylamide （NTA） was polymerized by a radical route to obtain the polymer in good yield. The polymer with a pendent heterocyclic group is soluble in common organic solvents, which allow to prepare the corresponding metal complexes with higher loads easily. FTIR, ^1H NMR, elemental analysis, and energy-dispersive X-Ray spectroscopy （EDX） were applied to characterize these materials. The magnetic behavior of Fe（Ⅱ） and Nd（Ⅲ） complexes of poly（N-2-thiazolylacrylamide） was examined by a PPMS-9T magnetometer, exhibiting the characteristics of a soft ferromagnet. It is found that the Nd（Ⅲ） complex has an extremely high relative saturation magnetization of 35 emu/g.     

The Adsorption of NOx on Magnesium Aluminium Hydrotalcite

Magnesium aluminium hydrotalcite (Mg-Al-HT) with molar ratio of Mg-to-Al of 3 to 1 was prepared and characterized by X-ray diffraction (XRD) and infrared spectra (IR). The performances of Mg-Al-HT for the adsorption and desorption of NOx were studied. The results indicated that the adsorption capacity of the hydrotalcite for NOx was 1398.2mg/g, and it was higher than the acticarbon‘s. The adsorption capacities depended on adsorption time and temperature.Mg-Al-HT could be regenerated by thermal decomposition, and the adsorption efficiency had not changed markedly after three cycles.     

金属四苯基卟啉-次氯酸钠模拟体系中芳醛氧化反应的研究

研究了以次氯酸钠为氧化剂在两相条件下芳香醛氧化反应中锰(III)-卟啉的催化性质, 在TPPMn(III)醋酸盐, TPPFe(III)氯化物, TPPCo(II)和TPPNi(II)催化剂中(四苯基卟啉, TPP), 前二个化合物呈现催化活性, 研究表明, OXO-金属卟啉的形成是反应的关键步骤。     

催化褪色光度法测定微量锰（Ⅱ）的研究

本文研究在硫酸介质中，锰（Ⅱ）催化ＥＤＴＡ还原重铬酸银，而使之褪色的新指示反应。确定了催化褪色反应动力学条件，锰（Ⅱ）的浓度在０－０．４μｇ／ｍｌ范围内，工作曲线呈良好的线性关系，检测限为０．０１１μｇ／ｍＬ，该方法用于天然水及污水中锰的测定，获得满意结果。     

One-dimensional Supramolecular Chain Based on a Dinuclear Terbium（Ⅲ） 4-Cyanobenzoate Complex

A new dinuclear Tb（Ⅲ） 4-cyanobenzoate complex [Tb2（4-cba）6（phen）2] （4-Hcba = 4-cyanobenzoic acid and phen = 1,10-phenanthroline） 1 has been synthesized by solvothermal reaction in an ethanol/water mixed solution at 100℃ and structurally characterized by single-crystal X-ray diffraction. Crystallographic data： C72H40N10O12Tb2, Mr=1554.98, triclinic Pi, a = 9.903（3）, b = 11.769（8）, c = 15.078（8）A, a = 111.42（12）, It = 96.37（19）, γ = 101-24（14）°, V= 1572（1）A3, Z= 1, Dc = 1.642 g/cm^3, F（000） = 768 μ = 2.305 mm^-1, the final R = 0.0205 and wR = 0.0543 for 5479 reflections with I 〉 2σ（I）. Structural analysis shows that 1 displays an isolated dinuclear structure. Two eight-coordinated Tb（Ⅲ） ions are bridged by four 4-cba ligands in the syn-syn bidentate coordination mode, and two other 4-cba ligands chelate these two Tb（Ⅲ） ions. The title complex molecules are connected through π-π stacking interactions to generate a one-dimensional supramolecular chain, The characteristic infrared spectra, luminescent properties and thermogravimetric analyses have also been discussed.     

Cu/TiO2-NiO上光促表面催化CO2和H2O合成CH3OH反应规律

采用溶胶-凝胶法制备了n(电子型)-p(空穴型) 复合半导体材料0.5％Cu/TiO2-2.0％NiO (w),利用X射线衍射(XRD)、透射电镜(TEM)、红外光谱(IR)、紫外-可见光漫反射(UV-Vis)、程序升温脱附(TPD)技术对材料结构、吸光性能、化学吸附性能进行了表征,研究了该材料对CO2和H2O合成CH3OH的光促表面催化反应(PSSR)规律.结果表明,所制备材料能够明显促进目的反应,室温条件下即有CH3OH生成.在200 ℃下,由于光-表面-热的协同效应,CO2转化率得以提高,且CH3OH的选择性达到87.5％ .根据实验结果,得出CO2在材料表面的卧式吸附态为CH3OH的前驱物,并对PSSR机理进行了讨论.     

酚醛型吸附树脂对咖啡因吸附性能的研究

利用 3种自制吸附树脂JDW 1、JDW 2、JDW 3和DuoliteS 761对咖啡因进行了静态和动态吸附研究 .结果发现 3种自制树脂对咖啡因的吸附性能明显优于DuoliteS 761 ;在吸附咖啡因的初始阶段 ,即达到 3 2 %～5 1 %平衡吸附百分率时 ,吸附速率数据和半经验速率方程很吻合 ,证实吸附咖啡因是粒扩散控制过程 ;酚醛型吸附树脂等温吸附咖啡因的平衡吸附数据符合Langmuir方程 ,相关系数在 0 99以上 ,因此 ,酚醛型吸附树脂吸附咖啡因属单分子层吸附 ;用 1mol LHCl和 40 %的甲醇溶液复合使用 ,效果很好     

THERMAL PROPERTY, MISCIBILITY AND CRYSTALLIZATION BEHAVIOR OF POLY（3-HYDROXYBUTYRATE-co- 3-YDROXYHEXANOATE） AND POLY（BUTYLENE SUCCINATE-ADIPATE） （PHBHHX/PBSA） BLENDS

Blends of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) and poly(butylene succinate-adipate) (PBSA), both biodegradable semicrystalline polyesters, were prepared with the ratio of PHBHHx/PBSA ranging from 80/20 to 20/80 by melt mixing method. Differential scanning calorimetry (DSC), thermogravimetry analysis (TGA), dynamic mechanical thermal analysis (DMA), polarizing optical microscopy (POM) and wide angle X-ray diffractometer (WAXD) were used to study the miscibility and crystallization behavior of PHBHHx/PBSA blends. Experimental results indicate that PHBHHx is immiscible with PBSA as shown by the almost unchanged glass transition temperature and the biphasic melt.     

Cu(bpy)22+—Nafion聚合物膜修饰电极研究

在目前的聚合物膜修饰电极领域中引起人们极大的研究兴趣,这是因为用离子交换方法可将许多电化学或电催化活性的阳离子物种固定于Nafion膜中,构成具有离子导电功能和特定电化学性质的膜合物膜修饰电极。     

Ce-Zr-Ba-O纳米材料的制备及其结构与性能研究

以金属硝酸盐为原料,分别采用高分子前驱体法、柠檬酸盐凝胶法制备了纳米级的Ce-Zr-Ba-O复合氧化物超细粒子,采用X-射线衍射(XRD)、透射电镜(TEM)、BET比表面测定、热重-差热(TG-DTA)技术对催化剂进行了表征,并考察了催化剂的CO氧化活性和热稳定性。实验结果表明,高分子前驱体法和柠檬酸盐凝胶法制备的催化剂粉体都达到了纳米级。两种方法中,高分子前驱体法所制得的催化剂的BET比表面达118.96m²·g^-1,CO氧化反应活性较高,同时该方法制得的催化剂分散性好,无团聚,经1000℃高温焙烧后仍基本无烧结、无团聚现象,具有较高的热稳定性。