ECR-SFC轴向注入系统聚束器效率的研究

为了减少目前SFC轴向注入系统中聚束器杂散电场对束流轴向注入效率的影响, 提高新系统中SFC的束流俘获效率, 参考原始设计, 对目前聚束器的电极结构进行了设计改进. 两种情况下的聚束器杂散场对注入效率影响的计算表明, 改进后0B02的聚束效率较目前有较大提高. 同时计算了束流空间电荷效应对聚束效率的影响, 据此对新SFC轴向注入系统中聚束器的位置进行了重新调整.     

塑料闪烁体的辐照特性

利用⁶⁰Co放射源分别对3种塑料闪烁体(BC-408, EJ-200, BC-404)进行辐照损伤研究, 比较辐照前后的透射谱、发射谱及光产额的变化, 发现3种闪烁体在低剂量具有较好的抗辐照性能; 当照射剂量超过1.44×10⁴Gy时,透射谱明显变坏, 光输出减少很严重, 但发射谱却保持不变.     

弱形变双奇核158Tm中的旋称反转

通过融合蒸发反应¹⁴⁴Nd(¹⁹F,5n)布居了双奇核¹⁵⁸Tm的高自旋态. 扩展了原来已知的带结构, 并建立了一条新转动带. 通过与相邻核的比较, 讨论¹⁵⁸Tm核中两条四准粒子带的内禀组态, 并分别指定为πh_11/2\otimes νh_9/2(α=+1/2)\otimes (νi_13/2)²和πh_11/2\otimes νh_9/2(α=－1/2)\otimes (νi_13/2)² 组态. 建立在πh_11/2\otimes νi_13/2组态上的转动带被观测到呈现持续旋称反转现象, 而前述的两条高自旋区的 四准粒子转动带也呈旋称反转. 对这两种类型的旋称反转现象的可能机制进行了简单而定性的讨论.     

上海光源储存环磁聚焦结构设计

上海光源是一台正在建设中的低发射度第三代同步辐射光源. 经过优化后, 储存环有两种直线节长度, 周长432m,在能量3.5GeV下束流发射度为3.9nm.rad, 直线节处的β函数和色散函数有足够的调节范围. 跟踪研究表明, 即使带上磁铁高阶场误差, 储存环仍有足够大的动力学孔径和能量接受度.     

BEPCⅡ直线加速器重大改造和束流调试进展

BEPCⅡ直线加速器的重大改造旨在获得高流强、小发射度和小能散的正负电子束, 以满足对撞机亮度提高两个两级的要求. 这对直线加速器各系统和束流物理是一个挑战. 文章介绍了直接决定束流性能的新电子源、新正电子源、新微波功率源、相位控制系统和束流测量系统等的改造情况; 叙述了束流物理研究; 介绍了束流调试进展情况和进一步改进计划.     

Analysis on cohesive crack opening displacement considering the strain softening effect

In order to investigate the crack propagation in quasi-brittle materials like rock, ceramic and concrete, Hillerborg and his co-researchers abstracted the fracture process zone in front of a stress free crack in terms of a “fictitious crack zone”. On the fictitious crack zone, cohesive stresses distribute following a given softening relationship of stress vs. crack opening. Based on the polynomial or power series expression of cohesive crack opening displacement, the relationship of the cohesive stress vs. the crack opening displacement is established using elastic theory and integral equation, and some unknown physics variables are obtained using variation approach. The calculation results gained in this paper are close to the experimentally test ones.     

On-line matrix addition for detecting aerosol particles

Single aerosol particles were measured by matrix-assisted laser desorption/ionization (MALDI) with an aerosol time-of-flight mass spectrometer (ATOFMS). The inlet to the ATOFMS was coupled with an evaporation/condensation flow cell that allowed matrix addition by condensation onto the particles. The coated particles entered the ion source through three-stage differentially pumped capillary inlet and were then ionized by a focused 266 nm Nd:YAG laser. The mass spectra and aerodynamic size of the single particles can be obtained simultaneously. The on-line matrix addition technique makes it possible to identify biological aerosols in real-time.     

辐射平衡激光器谐振腔模型计算

介绍了辐射平衡激光器原理以及谐振腔模型,并对腔内激光和泵浦光满足的方程进行了推导。计算了在Yb:KYW辐射平衡激光器谐振腔中激光和泵浦光光强的变化规律,以及输出端耦合镜反射率和腔长变化时带来的影响。讨论了腔长的最小值与输出端耦合镜反射率之间的关系。     

(Anti-)de Sitter Black Hole Entropy and Generalized Uncertainty Principle

We generalize the method that is used to study corrections to Cardy-Verlinde formula due to generalized uncertainty principle and discuss corrections to Cardy-Verlinde formula due to generalized uncertainty principle in (anti)-de Sitter space. Because in de Sitter black hole spacetime the radiation temperature of the black hole horizon is different from the one of the cosmological horizon, this spacetime is a thermodynamical non-equilibrium spacetime.     

傅里叶变换红外光谱仪遥测污染云团的吸收光谱算法

遥感傅里叶变换红外光谱技术因其具有对污染源作无干扰监测、多组分的同时连续测定、区域性或大范围地区的测量等优点,因而已广泛的应用于遥感测量技术。利用傅里叶变换红外(FTIR)光谱仪远距离探测目标,根据探测的目标源是否充满光谱仪的视场,建立了三种辐射模型。在所建立模型的基础上,选用了D&P公司生产的便携式Model-101型傅里叶变换红外光谱仪,实时探测目标云团和背景,运用差谱法和发射光谱法对探测结果进行了光谱分析,进而得到了扣除背景影响后的目标云团吸收光谱。给出了相应的仿真实验结果示例。实验结果表明,由差谱法得到的结果准确度较好。