Investigation into the structural composition of hydroalcoholic solutions as basis for the development of multiple suppression pulse sequences for NMR measurement of alcoholic beverages

An eight‐fold suppression pulse sequence was recently developed to improve sensitivity in ¹H NMR measurements of alcoholic beverages [Magn. Res. Chem. 2011 (49): 734–739]. To ensure that only one combined hydroxyl peak from water and ethanol appears in the spectrum, adjustment to a certain range of ethanol concentrations was required. To explain this observation, the structure of water–ethanol solutions was studied. Hydroalcoholic solutions showed extreme behavior at 25% vol, 46% vol, and 83% vol ethanol according to ¹H NMR experiments. Near‐infrared spectroscopy confirmed the occurrence of four significant compounds (‘individual’ ethanol and water structures as well as two water–ethanol complexes of defined composition – 1 : 1 and 1 : 3). The successful multiple suppression can be achieved for every kind of alcoholic beverage with different alcoholic strengths, when the final ethanol concentration is adjusted to a range between 25% vol and 46% vol (e.g. using dilution or pure ethanol addition). In this optimum region, an individual ethanol peak was not detected, because the ‘individual’ water structure and the 1 : 1 ethanol–water complex predominate. The nature of molecular association in ethanol–water solutions is essential to elucidate NMR method development for measurement of alcoholic beverages. The presented approach can be used to optimize other NMR suppression protocols for binary water–organic solvent mixtures, where hydrogen bonding plays a dominant role. Copyright © 2014 John Wiley & Sons, Ltd.     

Controlled ring‐opening homo‐ and copolymerization of ɛ‐caprolactone and d,l‐lactide by iminophenolate aluminum complexes: An efficient approach toward well‐defined macromonomers

The aluminum complexes containing two iminophenolate ligands of the type (p‐XC₆H₄NCHC₆H₄O‐o)₂AlR' (R′=Me ( 3, 4 ) or R′=O(CH₂)₄OCH=CH₂ ( 5, 6 ), X=H ( 3, 5 ), F( 4, 6 )) were synthesized and characterized by ¹H, ¹³C NMR spectroscopy, and X‐ray crystallography. The reaction of AlMe₃ with two equivalents of substituted iminophenols gave five‐coordinated {ONR}₂AlMe ( 3, 4 ) complexes. Subsequent reaction of these methyl complexes with unsaturated alcohol, HO(CH₂)₄OCH=CH₂, resulted in target compounds 5 and 6 in a good yield. It was shown that the complexes ( 3 ‐ 6 ) are monomeric in solution (NMR) and in solid state (X‐ray analysis). The catalytic activity of the complexes 5 and 6 towards ring‐opening polymerization (ROP) of ?‐caprolactone and d,l ‐lactide was assessed. Complex 5 showed higher activity as compared with 6 , while both of these catalysts induced controlled homo‐ and copolymerization to afford the macromonomers with high content of vinyl ether end groups (F_n > 80%) in a broad range of molecular weights (M_n = 4000–30,000 g mol^?1) with relatively narrow MWD (M_w/M_n = 1.1–1.5). © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1237–1250     

Design of pincer complexes based on (methylsulfanyl)acetic/propionic acid amides with ancillary S‐ and N‐donors as potential catalysts and cytotoxic agents

Pincer complexes featuring readily tunable tridentate ligand frameworks comprise one of the most actively studied classes of organometallic and metal–organic compounds and find extensive use in catalysis, organic synthesis, materials science, and other fields of chemistry and allied disciplines. Currently growing attention is devoted to non‐classical ligand scaffolds, such as functionalized carboxamides, which offer multiple options for directed structural modifications. In this study, the reactions of (methylsulfanyl)acetyl and propanoyl chlorides with 2‐(aminomethyl)pyridine, 2‐(2‐aminoethyl)pyridine, 8‐aminoquinoline and 2‐(diphenylthiophosphoryl)aniline afford a series of new pincer‐type ligands based on functionalized carboxamides. The ligands obtained readily undergo direct cyclopalladation under the action of PdCl₂(NCPh)₂ in dichloromethane at room temperature, resulting in Pd(II) pincer complexes with N,N,S‐ and S,N,S‐donor sets. Importantly, some of the cyclopalladated derivatives can also be produced efficiently under solvent‐free conditions according to the approach recently developed by our group. The complexes obtained have been tested for cytotoxicity against several human cancer cell lines and catalytic activity in the model Suzuki reaction. The results have been compared to those for the related Pd(II) pincer complexes to define the main structure–activity relationships and to outline the most promising structures for further investigations.     

Monitoring and Statistical Analysis of Formation of Organochlorine and Organobromine Compounds in Drinking Water of Different Water Intakes

The main drawback of drinking water chlorination involves the formation of quite hazardous disinfection by-products (DBPs), represented mainly by halogenated species. Based on the authors’ monitoring data since 2002, the prevalence of chlorine over bromine in the composition of volatile DBPs was shown for the drinking water in Ufa (Russia). However, the situation was completely reversed in the case of semi-volatile DBPs. The principal goal of the present study involved rationalization of the results of the long-term monitoring. Gas chromatography–mass spectrometry (GC-MS) was used for the qualitative and quantitative analysis of volatile DBPs. Identification of semi-volatile compounds was carried out with GC-MS, while gas chromatography with an atomic emission detector (GC-AED) was used for their quantification. A significant contribution of oxygen to the composition of semi-volatile compounds proves the decisive role of the dissolved organic matter oxidative destructive processes. Statistical analysis revealed notable linear correlations for trihalomethane and haloacetic acid formation vs. chlorine dose. On the contrary, halogenated semi-volatile products do not demonstrate any correlations with the water quality parameters or chlorine dose. Principal component analysis (PCA) placed them into separate groups. The results allow for proposing that formation of the organohalogenated species involved the fast penetration of bromine into the humic matter molecules and, further, their oxidative destruction by active chlorine.     

Organoboron Derivatives of Stereoregular Phenylcyclosilsesquioxanes

This study presents the synthesis of organoboron derivatives of stereoregular 4-, 6-, and 12-unit phenylcyclosilsesquioxanes. All compounds obtained were isolated in good yields (70–80 %) and were fully characterized by ¹H, ¹³C, ²⁹Si, ¹¹B NMR, IR spectroscopy, HRMS ESI, and elemental microanalysis. The structure of the key modifier, obtained for the first time, 4-(tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl) dimethylvinylsilane, was also confirmed by single-crystal XRD.     

Heterocyclization of electrophilic alkenes with tetranitromethane revisited: regiochemistry and the mechanism of nitroisoxazole formation

Revised regiochemistry for the heterocyclization of electrophilic alkenes with tetranitromethane (TNM) in the presence of triethylamine, providing rapid access to nitroisoxazoles, is reported. The formation of 5-nitroisoxazoles previously incorrectly assigned as 3-nitro regioisomers, has now been established unambiguously by X-ray crystallography. Empirical computations with ACD/CNMR Predictor, based both on hierarchical ordering of spherical environments (HOSE) and an algorithm of artificial neural networks (ANN), and also Density Functional Theory computations of the ¹³C NMR chemical shifts for the 3- versus 5-nitroisoxazoles are shown to consistently match the spectra of the experimentally observed 5-regioisomers.     

Versatile Cycloaddition Reactions of 1-Alkyl-1,2-Diphospholes

Abstract

The reactivity of 1-alkyl-1,2-diphospholes in cycloaddition reactions with dienes, dienophiles or 1,3-dipoles was examined. 1-Alkyl-1,2-diphospholes (2 ) exhibit dual reactivity and act as diene toward maleic acid derivatives or as dienophiles with 2,3-dimethyl-1,3-butadiene. The 1-alkenyl-1,2-diphospholes (4 ) are readily involved in intramolecular [4 + 2] cycloaddition reactions leading to cage phosphines (5 ). Interaction of 1-alkyl-1,2-diphospholes (2) with 1,3-dipolar reagents (diphenyldiazomethane and nitrones) results in formation of the bicyclic phosphiranes (8) and dimers of 1-alkyl-1,2-diphosphole oxides (9) or bicyclic phosphine oxides (10) with a β-lactam moiety depending on temperature.     

Calorimetric study of poly(2-ethylhexyl acrylate) over the range from T → 0 to 350 K

For the first time, the heat capacity $ C_{\text{p}}^{^\circ } $ of poly(2-ethylhexyl acrylate) has been studied in an adiabatic vacuum calorimeter between 7 and 350 K, the standard thermodynamic functions: heat capacity $ C_{\text{p}}^{^\circ } $ (T), enthalpy H°(T) ? H°(0), entropy S°(T) ? S°(0), Gibbs function G°(T) ? H°(0) have been calculated from T → 0 to 350 K. The energy of combustion Δ_c U of the compound under study has been measured in a calorimeter with a stationary bomb and an isothermal shell. The standard enthalpy of combustion Δ_c H° and thermodynamic parameters of formation—enthalpy Δ_f H°, entropy Δ_f S°, Gibbs function Δ_f G°—at T = 298.15 K have been calculated. The results have been used to calculate the thermodynamic characteristics of 2-ethylhexyl acrylate bulk polymerization into poly(2-ethylhexyl acrylate) over the range from T → 0 to 350 K.     

A Comparative Study of Biocathodes Based on Multiwall Carbon Nanotube Buckypapers Modified with Three Different Multicopper Oxidases

14 Single‐ and multi‐walled carbon nanotubes from different sources were characterized in detail, and the characteristics obtained were carefully analyzed. The carbon material with the highest capacitance, and also other superior properties (“Taunit‐M” from “NanoTechCenter”, Russia), was chosen for further modification and fabrication of buckypaper based electrodes. These electrodes were biomodified with plant and fungal laccases, as well as fungal bilirubin oxidase. The designed biocathodes were investigated in simple buffers and also in a complex physiological fluid (human serum). Biocathodes based on immobilized fungal laccase were bioelectrocatalytically inactive in chloride containing media at neutral pH. In spite of the quite high current densities realized using biodevices based on plant laccase and fungal bilirubin oxidase, the limited thermal stability of the enzymes renders the biocathodes inadequate for practical applications in implanted situations.