三唑环修饰的苯并菲二羧酸酯和酰亚胺: 合成、液晶及凝胶性

在盘状液晶分子外围柔性链中引入功能不同的基团, 是设计和合成具有良好液晶性能化合物的常用策略. 本工作从苯并菲2,3-二甲酸和酸酐出发, 通过亲核取代和点击反应, 分别合成了两类三唑环修饰的苯并菲二羧酸酯和苯并菲酰亚胺化合物. 热重分析仪(TGA)测试表明, 新制备的主要中间产物与目标化合物失重为5%时的温度在274~389 ℃之间, 均表现出良好的热稳定性. 我们通过差示扫描量热法(DSC)、偏光显微镜(POM)和变温X射线衍射(XRD)实验对这些化合物的热力学行为和介晶性进行了研究. 除三唑环修饰的酯3a和3b无液晶性外, 主要中间产物(2和5)与三唑环修饰的酰亚胺产物(6a和6b)均有一个六方柱状液晶相. 此外, 制备的以三唑为桥联基团的酰亚胺二聚体10为室温液晶, 具有173 ℃的液晶范围. XRD证实了该二聚体中存在有序度不同的两种柱状液晶相(Col_h1和Col_h2). 另外, 由于三唑环的引入, 三唑环修饰的酯类和酰亚胺两类化合物在某些有机溶剂中都能形成有机凝胶. 其中, 二聚体10在1,2-二氯乙烷和1,4-二氧六环中表现出优异的凝胶能力, 其临界凝胶浓度(CGC)可低至1 mg/mL. 相比之下, 不含三唑环的中间产物2和5则不能形成凝胶, 表明三唑环之间的偶极-偶极作用和液晶刚性核π-π堆积的协同作用对于超分子凝胶的形成起着重要的作用. 因此, 同时表现出液晶和凝胶性质的三唑环修饰的苯并菲2,3-二酰亚胺分子具有成为一种多功能材料的潜在应用价值.     

偶氮苯基两亲性聚合物的自组装行为研究进展

偶氮苯基两亲性聚合物结合了偶氮苯基团的光响应、酶响应、主客体识别特性和两亲性聚合物的自组装特性,能够在选择性溶剂中发生聚合物可控自组装行为,这使得其在药物控释、纳米技术和生物医学材料等领域受到了广泛的关注。本文从结构类型和合成方法出发,综述了新型偶氮苯基两亲性聚合物在溶液中的自组装研究进展,并对该领域的发展前景进行了展望。     

石墨烯包覆天然球形石墨作为锂离子电池的负极材料，是否需要乙炔黑导电剂？

我们通过包覆炭化的方法制备得到了石墨烯包覆的天然球形石墨(G/SG)材料,并使用扫描电子显微镜、X射线衍射仪以及多种电化学测试手段考察了不同石墨烯含量的复合材料的形貌结构及电化学性能。我们发现,在不添加乙炔黑(AB)的情况下,G/SG复合材料表现出较高的首次库伦效率,很好的循环稳定性和高倍率性能。当石墨烯包覆量为1%时,材料50次循环后的可逆容量可与添加10%AB的天然石墨电极(SG)等同;当石墨烯包覆量为2.5%时,材料的比容量完全高于添加10%AB的石墨电极。材料电化学性能的改善归因于石墨烯的包覆。一方面,石墨烯的柔软可变性可以保证天然石墨颗粒在充放电过程中的结构完整性,从而有效改善材料的循环稳定性;另一方面,石墨烯的存在提高了电极的导电性,促进更好导电网络的形成。因此,石墨烯包覆天然球形石墨材料中,石墨烯不仅是活性物质,也发挥导电剂的作用。当添加5%的乙炔黑时,在50 mA·g^-1电流循环50次后,5%G/SG电极的可逆容量从381.1 mAh·g^-1提高到404.5 mAh·g^-1,在1 A·g^-1电流时可逆容量从82.5 mAh·g^-1提高到101.9 mAh·g^-1,这表明G/SG电极仍然需要乙炔黑导电剂。乙炔黑颗粒填充在复合材料的空隙中,通过点接触的形式连接到G/SG颗粒,与石墨烯协同作用形成了更加有效的导电网络。尽管石墨烯包覆和乙炔黑添加对天然石墨电极具有积极的影响,例如增加了天然石墨电极的导电性和储锂性能(包括可逆容量,倍率性能和循环性能),但随着石墨烯或乙炔黑的增加,电极密度通常会降低。因此,在实际应用中应考虑石墨负极材料的质量和体积容量的平衡。这些结果对天然石墨的进一步商业应用具有重要意义。我们的工作为天然石墨电极在锂电池中的电化学行为提供了一种新的认识,并且有助于制备更高性能的负极材料。     

Spatiotemporally-regulated multienzymatic polymerization endows hydrogel continuous gradient and spontaneous actuation

There are several natural materials which have evolved functional gradients,ingeniously attaining maximal efficacy from limited components.Herein,we utilized the spatiotemporal distribution of initiator acetylacetone to regulate the multienzyme polymerization and fabricate a chitosan-polymer hydrogel.The temporal priority order of acetylacetone was higher than phenolmodified chitosan by density functional theory calculation.The acetylacetone within the gelatin could gradually diffuse spatially into the chitosan hydrogel to fabricate the composite hydrogel with gradient network structure.The gradient hydrogel possessed a transferring topography from the two-dimensional pattern.A continuously decreased modulus along with acetylacetone diffusion was confirmed by atomic force microscope-based force mapping experiment.The water-retaining ability of various regions was confirmed by low-field nuclear magnetic resonance(NMR)and thermogravimetric analysis(TG)analysis,which led to the spontaneous actuation of gradient hydrogel with maximum 1821°/h curling speed and 227°curling angle.Consequently,the promising gradient hydrogels could be applied as intelligent actuators and flexible robots.     

Generation of Glycosyl Radicals from Glycosyl Sulfoxides and Its Use in the Synthesis of C‐linked Glycoconjugates

We here report glycosyl sulfoxides appended with an aryl iodide moiety as readily available, air and moisture stable precursors to glycosyl radicals. These glycosyl sulfoxides could be converted to glycosyl radicals by way of a rapid and efficient intramolecular radical substitution event. The use of this type of precursors enabled the synthesis of various complex C‐linked glycoconjugates under mild conditions. This reaction could be performed in aqueous media and is amenable to the synthesis of glycopeptidomimetics and carbohydrate‐DNA conjugates.     

Understanding the Effect of Solvent Environment on the Interaction of Hydronium Ion with Biomass Derived Species: A Molecular Dynamics and Metadynamics Investigation

The addition of aprotic solvents results in higher reactivities and selectivities in many key aqueous phase biomass reactions, including the acid-catalyzed conversion of fructose to 5-hydroxyl methyl furfural (HMF). The addition of certain co-solvents inhibits the formation of humins via preferential solvation of key functional groups and can alter reaction kinetics. An important factor in this context is the relative stability of the hydronium ion (the catalyst) in the vicinity of the biomass moiety as compared to that in bulk, as it could determine its efficacy in the protonation step. Hence, in the present work, molecular dynamics (MD) simulations of HMF (the model product) and fructose (the model reactant) in acidic water and water-DMSO mixtures are performed to analyze their interaction with the hydronium ions. We show that the presence of DMSO favors the interaction of the hydronium ion with fructose, whereas it has a detrimental effect on the interaction of hydronium ion with HMF. Well-tempered metadynamics (WT-MTD) simulations are performed to determine the relative stability of the hydronium ion in the immediate vicinity of fructose and HMF, as compared to that in the bulk solvent phase, as a function of solvent composition. We find that DMSO improves the stabilization of the hydronium ions in the first solvation shell of fructose compared to that in the bulk solvent. On the other hand, hydronium ions become less stable in the immediate vicinity of HMF, as the concentration of DMSO increases.     

基于WIA-PA传感器网络的能量有效时间同步算法

WIA-PA协议是一种新型工业级无线传感器网络国际标准。当WIA-PA网络内节点数目增多时,传统的参考广播同步算法RBS以及改进型ERBS算法网络开销非常大。针对这一严峻的问题,提出了一种能量有效的局部最优时间同步算法。该算法对相邻的接收节点在多个参考广播消息的条件下求取平均相位偏差,然后对此平均相位偏差进行最大后验估计,最后根据此估计值调整本地时钟。仿真结果表明,本文所提时间同步算法在同步精度方面比RBS约提高168%,比ERBS约提高24%;同时,同步过程中的网络能耗也大大减少。     

尖晶石铁氧体TixNi1-xFe2O4中阳离子分布和Ti离子磁矩的实验研究

采用固相反应法制备了系列样品Ti_xNi_1-xFe₂O₄ (x=0.0, 0.1, 0.2, 0.3, 0.4). 室温下的X射线衍射谱表明样品全部为(A)[B]₂O₄型单相立方尖晶石结构, 属于空间群Fd3m. 样品的晶格常数随Ti掺杂量的增加而增大. 样品在10 K温度下的比饱和磁化强度σ_S随着Ti掺杂量x的增加逐渐减小. 研究发现, 当Ti掺杂量x≥ 0.2时, 磁化强度σ随温度T的变化曲线出现两个转变温度T_L和T_N. 当温度低于T_N时, 磁化强度明显减小; 当温度达到T_N时, dσ/dT具有最大值. σ-T曲线的这些特征表明, 由于Ti掺杂在样品中出现了附加的反铁磁结构. 这说明样品中的Ti离子不是无磁性的+4价离子, 而是以+2和+3价态存在, 其离子磁矩的方向与Fe和Ni离子的磁矩方向相反. 利用本课题组提出的量子力学方势垒模型拟合样品在10 K温度下的磁矩, 得到了Ti, Fe和Ni三种阳离子在(A)位和[B]位的分布情况, 并发现在所有掺杂样品中, 80%的Ti离子以+2价态占据尖晶石结构的[B]位.     

混合微球谐振腔热非线性效应的增强方法（英文）

提出并实现了一种可增强微球谐振腔热非线性效应的方法。通过在微球谐振腔表面涂覆低折射率紫外胶形成并制备了混合谐振腔。通过分析混合谐振腔结构的热光系数,从理论和实验论证了混合谐振腔结构可获得更大的热非线性效应,同时验证了混合谐振腔的品质因素对热非线性的影响。应用此混合谐振腔结构于温度传感实验,结果表明通过增强方法制备的谐振腔其检测灵敏度提高了2.8倍。因此,此方法在传感应用、生物化学检测、通讯等领域也有广泛的应用前景。