不同激发密度下CdS晶体的光致发光和受激发射

本文主要研究在77-111K温度范围内、不同激发密度的N2激光器的337.1nm谱线激发下,激子-激子(Ex-Ex)、激子-载流子(Ex-e)的相互作用和发射一个LO声子(Ex-1LO)、两个LO声子(Ex-2LO)的自由激子的辐射复合行为.并在77K温度下观测到由Ex-Ex发射产生的受激发射.     

Influence of preparation methods on structure and properties of PA6/PA66 blends: A comparison of melt‐mixing and in situ blending

The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt‐mixing through a twin‐screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of ε‐caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic form, and crystallization and melting behaviors using polarized optical microscopy (POM), wide‐angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT‐IR) and ¹³C solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt‐mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T_g) for the in situ blends, contrary to an increase of T_g with increasing PA66 content for the melt‐mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1176–1186, 2007     

热电材料研究进展

在介绍热电材料制冷工作原理，分析热电材料优值系数的基础上，介绍了300K以下热电材料的研究进展，分析了热电材料的制冷特点、现状和应用前景．     

2‐Cyanoprop‐2‐yl dithiobenzoate mediated reversible addition–fragmentation chain transfer polymerization of acrylonitrile targeting a polymer with a higher molecular weight

The reversible addition–fragmentation chain transfer (RAFT) polymerization of acrylonitrile (AN) mediated by 2‐cyanoprop‐2‐yl dithiobenzoate was first applied to synthesize polyacrylonitrile (PAN) with a high molecular weight up to 32,800 and a polydispersity index as low as 1.29. The key to success was ascribed to the optimization of the experimental conditions to increase the fragmentation reaction efficiency of the intermediate radical. In accordance with the atom transfer radical polymerization of AN, ethylene carbonate was also a better solvent candidate for providing higher controlled/living RAFT polymerization behaviors than dimethylformamide and dimethyl sulfoxide. The various experimental parameters, including the temperature, the molar ratio of dithiobenzoate to the initiator, the molar ratio of the monomer to dithiobenzoate, the monomer concentration, and the addition of the comonomer, were varied to improve the control of the molecular weight and polydispersity index. The molecular weights of PANs were validated by gel permeation chromatography along with a universal calibration procedure and intrinsic viscosity measurements. ¹H NMR analysis confirmed the high chain‐end functionality of the resultant polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1272–1281, 2007     

微纳米加工技术及其应用综述

材料与结构在微纳米尺度展现了许多不同于宏观尺度的新特征，纳米技术已经成为当前科学研究与工业开发的热门领域之一。微小型化依赖于微纳米尺度的功能结构与器件，实现功能结构微纳米化的基础是先进的微纳米加上技术，文章对微纳米加上技术做了一个综合的介绍，简要说明了微纳米加工技术与传统加工技术的区别，在微纳米加工技术的应用方面提出了一些合理选择加工技术的原则，并对当前微纳米加工技术面临的挑战和今后发展的趋势作了预测。     

乌鲁木齐市商业中心的等级体系及合理布局的探讨

本文利用85年5—6月间对乌鲁木齐市主要商业区及部分中、小商业区的实地调查资料,对乌市商业中心等级系统进行了定性和定量的分级分类,将全市商业中心划分为五个等级,八组商业中心,对已形成的商业中心分布现状进行了初步探讨,并对今后商业网点的合理布局提出了建议。     

具功能反应的三种群捕食者——食饵系统数学模型稳定性的研究

[1]中提出了具有功能反应的三种群捕食者——食饵系统的两种模型(Ⅰ)、(Ⅱ),并给出了局部渐近稳定的条件。本文研究了另外两种模型(Ⅲ)和(Ⅳ)的局部渐近稳定的条件。     

周期性分层介质高反射区范围的分析与估计

对于具有周期单元的分层介质材料高反射区的波长范围，提供一种简明的估计分析方法.基于Floquet定理，分析了有限周期单元分层介质的光子带隙特性，给出分层介质的高反射区波长范围.讨论了分层介质高反射区和周期单元禁带之间的关系.计算表明，高反射区和周期单元禁带的中心波长彼此一致.并且，随着分层介质周期单元数的增多，高反射区的深度和带宽就越接近于周期单元禁带的深度和宽度.最后，讨论周期分层介质的光子带隙特性与入射角及其与极化的变化关系. 关键词： 分层介质 带隙特性 周期单元 高反射区     

500.8 nmNd∶YAG青光激光器光学薄膜的设计与制备

从双波长激光运转及和频的机理出发，对LD泵浦Nd∶YAG，LBO腔内和频500.8 nm〖JP2〗青光激光器所使用的光学薄膜进行了设计和制备.在激光反射镜的设计上，为了达到最佳的和频输出，对膜系要求进行了深入分析.采用对谐振腔一端面反射率固定不变并通过对另一腔镜基频光的透射率进行调谐的方法, 在给出合理初始结构后，利用计算机对膜厚进行了优化.并采用双离子束溅射沉积的方法，通过时间监控膜厚法成功制备出青光激光器所使用的全介质激光反射膜, 在室温下实现946 nm和1064 nm双波长连续运转，并通过Ⅰ类临界相位匹配LBO晶体腔内和频在国内首次实现500.8 nm青色激光连续输出.当泵浦注入功率为1.4 W时和频青光最大输出达20 mW.