Intermolecular potential energy surface and spectra of He-HCl with generalization to other rare gas-hydrogen halide complexes

A two-dimensional (rigid monomer) intermolecular potential energy surface (PES) of the He-HCl complex has been obtained from ab initio calculations utilizing the symmetry-adapted perturbation theory (SAPT) and an spdfg basis set including midbond functions. The bond length in HCl was chosen to be equal to the expectation value in the ground vibrational state of isolated HCl. The rigid-monomer potential should be a very good approximation to the complete (three-dimensional) potential for H-Cl distances corresponding to the lowest vibrational levels of the monomer since the He-HCl interaction energy was found to be only weakly dependent on the HCl bond length in this region, at least as compared to systems such as Ar-HF. The calculated points were fitted using an analytic function with ab initio computed asymptotic coefficients. As expected, the complex is loosely bound, with the dispersion energy providing the majority of the attraction. Our SAPT PES agrees with the semiempirical PES of Willey et al. [J. Chem. Phys. 96, 898 (1992)], in finding that, atypically for rare gas-hydrogen halide complexes including the lighter halide atoms, the global minimum is on the Cl side (with intermonomer separation 3.35 A and depth of 32.8 cm(-1)), rather than on the H side, where there is only a local minimum (3.85 A, 30.8 cm(-1)). The ordering of the minima was confirmed by single-point calculations in larger basis sets and complete basis set extrapolations, and also using higher levels of theory. We show that the opposite findings in the recent calculations of Zhang and Shi [J. Mol. Struct: THEOCHEM 589, 89 (2002)] are due to the lack of midbond functions in their basis set. Despite the closeness in depth of the two linear minima, the existence of a relatively high barrier between them invalidates the assumption of isotropy, a feature of some literature potentials. The trends concerning the locations of minima within the family of rare gas-hydrogen halide complexes are rationalized in terms of the physical components of the intermolecular forces and related to monomer properties. The accuracy of the SAPT PES was tested by performing calculations of rovibrational levels. The transition frequencies obtained were found to be in excellent agreement (to within 0.02 cm(-1)) with the measurements of Lovejoy and Nesbitt [J. Chem. Phys. 93, 5387 (1990)]. The SAPT PES predicts a dissociation energy for the complex of 7.74 cm(-1) which is probably more accurate than the experimental value of 10.1+/-1.2 cm(-1). Our analysis of the ground-state rovibrational wave function shows that the He-HCl configuration is favored over the He-ClH configuration despite the ordering of minima. This is due to the greater volume of the well in the former case. We have also determined positions and widths of three low-lying resonance states through scattering calculations. These predictions are expected to be more accurate than values derived from experiment.     

Effects of alloying on the chemistry of CO and H2S on Fe surfaces

Deleterious gases such as CO and H(2)S can cause degradation of steel by reacting with the metal surface. Here we consider whether alloying the steel surface might be able to inhibit these damaging surface reactions by raising the barriers to molecular dissociation. We employ first-principles density functional theory techniques to investigate the elementary reaction pathways and barriers for CO and H(2)S on FeAl and Fe(3)Si surfaces and compare them with pure Fe surfaces (as a model for steel). We find that H(2)S dissociates on iron surfaces much more easily than CO does. Although FeAl surfaces raise the barriers for H(2)S dissociation, they significantly lower the barriers for CO dissociation. On the other hand, Fe(3)Si surfaces raise the barriers for CO dissociation, but they are as vulnerable as Fe surfaces to H(2)S dissociation. Our findings suggest that alloying iron with Al or Si is unlikely to simultaneously increase its resistance to the initial stages of chemical degradation by CO and H(2)S.     

Total Synthesis of (+/-)-Leporin A

An efficient synthesis of (+/-)-leporin A (1) has been developed using a tandem Knoevenagel condensation-inverse electron demand intramolecular hetero Diels-Alder reaction to construct the key tricyclic intermediate 3 from pyridone 5 and dienal 6 in one pot in 35% yield. Hydroxylation (71%) of 3 and methylation (77%) of the resulting hydroxypyridone 2 completed the first total synthesis of (+/-)-leporin A (1).     

Regioselective Re(I)-catalyzed coupling of terminal alkynes, Et2NH, and CO2 leading to anti-Markovnikov adducts

ReBr(CO)₅-catalyzed addition of Et₂NH and CO₂ to terminal alkynes afforded anti-Markovnikov adducts of alkenyl carbamates in good to excellent yield and high regioselectivity.     

Native and stearic acid modified ceria-zirconia supports in normal and reversed-phase HPLC

Porous ceria-zirconia composite with narrow particle size distribution and large specific surface area was synthesized by a sol-gel process. Chromatographic properties of the native supports was investigated in normal phase mode for the separation of test mixtures of basic, neutral and acidic compounds. The new packing material exhibited polar and basic properties, which are suitable for the separation of basic compounds. Lypophilic packing has been obtained by the modification of the ceria-zirconia with stearic acid, which exhibited strong hydrophobicity relative to the native packing. Therefore, the modified ceria-zirconia behaves as a reversed-phase packing material. Different selectivity towards basic compounds was observed on the new packing compared to the native ceria-zirconia and conventional ODS stationary phase.     

Determination of buprenorphine by high-performance liquid chromatography with fluorescence detection: application to human and rabbit pharmacokinetic studies.

A rapid, sensitive, precise and accurate high-performance liquid chromatographic assay with fluorescence detection was developed for the determination of buprenorphine in human, rabbit, pig and dog plasma. It is comprised of only a one-step extraction procedure with hexane-isoamyl alcohol at pH 9.25 and reversed-phase chromatography on a muPorasil column. The recoveries of buprenorphine and nalbuphine (internal standard) were greater than 90%. Calibration graphs were linear over the concentration range 3-300 ng/ml with a coefficient of variation, both within-day and between-day, of less than 9% at any level. The limit of detection was 1.0 ng/ml of plasma based on a signal-to-noise ratio of 3. Eight other clinically used narcotics were investigated to check for potential interferences and their analytical conditions. The possible decomposed compounds of buprenorphine were also checked for the specificity of this assay. The method has been successfully applied to the stability and pharmacokinetic studies of buprenorphine. Buprenorphine in plasma did not decompose significantly at -20 degrees C for four weeks. Pharmacokinetic application in six rabbits and a surgical patient revealed that buprenorphine followed a linear three-compartment model with two distribution phases. The two distribution and elimination half-lives and the clearance of buprenorphine were 1.32, 24.8 and 230 min and 224 ml/min in human plasma, and 0.94, 12.5 and 232 min and 30 ml/min in rabbit plasma.     

Enhanced electrical conductivity in chemically modified carbon nanotube/methylvinyl silicone rubber nanocomposite

Chemically modified multiwalled carbon nanotubes/methlyvinyl silicone rubber (m-MWNT/VMQ) nanocomposites with relatively good dispersion of nanotubes were prepared by treating the surface of MWNT using γ-aminopropyltriethoxy silane (KH550). Significant enhanced electrical conductivity was discovered in the m-MWNT/VMQ nanocomposites. The results could be attributed a strong interaction between m-MWNT and VMQ which was from the chemically modification of the surface for MWNT. The electrical property was also discussed in order to understand the percolation and electrical transport mechanism. The m-MWNT/VMQ nanocomposites with high conductivity in this study are promising application as one of novel functional materials.     

Carbonyldinitrosyltris(fluorosulfato)tungstate(II) and ‐Molybdate(II) Anions: Synthesis,Spectroscopy, and Density Functional Theory Calculations

Carbonyldinitrosyltris(fluorosulfato)tungstate(II) and ‐molybdate‐(II) anions, [fac‐M(CO)(NO)₂(SO₃F)₃]^? (M=W, Mo), which are novel weakly coordinating anions that contain a metal carbonyl/nitrosyl moiety, have been generated in fluorosulfonic acid and completely characterized by multinuclear NMR, IR, and Raman spectroscopy as well as ESI mass spectrometry. ESI MS measurements performed for the first time on a superacidic solution system unambiguously reveal the formation of the monoanionic, mononuclear W and Mo complexes formulated as [M(CO)(NO)₂(SO₃F)₃]^? (M=W, Mo). Multinuclear NMR spectroscopic studies at natural abundance and ¹³C and ¹⁵N enrichment clearly indicate the presence of one CO ligand, two equivalent NO ligands, and two types of nonequivalent SO₃F^? groups in a 2:1 ratio. The IR and Raman spectra reveal that the two equivalent NO ligands have a cis conformation, thus indicating a fac structure. Density functional calculations at the B3LYP level of theory predict that these anions have a singlet ground state (¹A′) with a C_s symmetry along with C–O and N–O vibrational frequencies that are in agreement with the experimental observations. Mulliken population analysis shows that the monovalent negative charge is dispersed on the bulky sphere, the surface of which is covered by all the negatively charged O and F atoms with charge densities much lower than SO₃F^?, suggesting that [fac‐M(CO)(NO)₂(SO₃F)₃]^? (M=W, Mo) are weakly nucleophilic and poorly coordinating anions.     

Kinetics of zinc and cadmium dissociation of metallothionein in the presence of chelating agents

The dissociation kinetics of metal ions from native metallothionein (Cd₅Zn₂-MT) of rat liver has been studied in the presence of external ligands including amino acids, peptide and polyamino polycarboxylic acids at 25°C. The study shows that the solution pH affects the metal dissociation process. Different ligands present different multiphasic kinetics. The possible mechanism of metal dissociation from metallothionein has been proposed.