Determination of pKa values of some hydroxylated benzoic acids in methanol-water binary mixtures by LC methodology and potentiometry

An accurate estimation of pK_a values in methanol-water binary mixtures is very important for several separation techniques such as liquid chromatography and capillary electrophoresis that use these solvent mixtures. In this study, the pK_a values of 11 polyphenolic acids have been determined in methanol-water binary mixtures (10%, 20% and 30% (v/v)) by potentiometry, liquid chromatography (LC) and LC-DAD methodology.The results show a similar trend for the pK_a values of all the studied compounds, as they increase with increasing concentration of organic modifier, which allows a linear relationship between pK_a values and mole fraction of methanol to be obtained. The pK_a values obtained in aqueous medium have been compared with those given in the literature, and also with the values predicted by the SPARC on-line pK_a calculator. The data obtained have been used to test the feasibility of an estimation of dissociation constants in a methanol-water medium from the relationship between pK_a values and the organic cosolvent fraction in the mixtures.     

Speciation analysis of chromium by separation on a 5-palmitoyl oxine-functionalized XAD-2 resin and spectrophotometric determination with diphenylcarbazide

The method developed in this work for the separation and preconcentration of Cr(III) is based on its retention by an Amberlite XAD-2 copolymer resin functionalized with 5-palmitoyl-8-hydroxyquinoline (oxine), abbreviated XAD-POx, with the ligand covalently bound to the copolymer. Cr(III) sorption was quantitative within the pH range 4.5–7.0 and Cr(VI) was not retained. The Cr(III) held by the resin column was eluted with a hot solution of H₂O₂ in pH9.0 aqueous NH₃–NH₄Cl buffer, and Cr oxidized to CrO₄^2– was rejected by the chelating cation-exchanger column. Any Cr(VI) originally present with Cr(III) could be reduced with an acidic solution of H₂O₂, and retained by the column yielding total Cr results, Cr(VI) being determined from the difference. The resin showed a maximal preconcentration factor of 60 for Cr(III), the LOD and LOQ being 9.3 and 30.1 nmol L^–1, respectively. The developed preconcentration-speciation analysis was finished with a diphenylcarbazide (DPC) spectrophotometric procedure suitable for conventional laboratories. The resin showed excellent salt tolerance, enabling Cr analysis in seawater, and was stable over extended use. All the interferents of this procedure that normally occur in an electroplating effluent, a blended coal CRM, and a standard steel sample could be removed by the recommended procedure, by use of partial and total selectivity at the adsorption and desorption stages, respectively, enabling preconcentration and colorimetric determination of chromium in various complex matrices.     

A competitive particle nucleation mechanism in the polymerization of homogenized styrene emulsions

The effects of concentrations of surfactant (sodium lauryl sulfate [SLS]) and initiator (sodium persulfate [SPS]) on the polymerization of homogenized styrene emulsions, stabilized by SLS/lauryl methacrylate (LMA) or SLS/stearyl methacrylate (SMA), were studied. The rate of polymerization increases with increasing [SLS] or [SPS]. In addition to monomer droplet nucleation, the formation of particle nuclei in the aqueous phase (homogeneous nucleation) plays a crucial role in the polymerization kinetics. In comparison with the LMA containing polymerization system, monomer droplet nucleation becomes more important when the more hydrophobic SMA was used as the costabilizer. Furthermore, the degree of homogeneous nucleation increases with increasing [SPS].     

Pseudolarolides O and P,Two Novel Triterpene Dilactones from Pseudolarix kaempferi

Pseudolarolides O ( 1 ) and P ( 2 ), two novel triterpenoids with a cycloartane‐type framework, were isolated from the seeds of Pseudolarix kaempferi Gord. (Pinaceae). Their structures were elucidated as (16R,23S,25R)‐16,23‐epoxy‐3,4 : 9,10‐disecocycloartan‐1(10),9(11)‐diene‐3(4),26(23)‐diolide ( 1 ), and (9S,16R,23S,25R)‐1,9 : 16,23‐diepoxy‐8,9 : 9,10‐disecocycloartan‐1(29),5(6),10(19)‐triene‐3(4),26(23)‐diolide ( 2 ), respectively, on the basis of spectroscopic techniques and X‐ray‐diffraction studies.     

Syntheses and Structure of Gd<Subscript>3</Subscript>Rh<Subscript>1.940(7)</Subscript>In<Subscript>4</Subscript>

Summary. The gadolinium–rhodium–indide Gd₃Rh_1.940(7)In₄ was prepared by arc-melting of the elements and subsequent annealing in a corundum crucible in a sealed silica tube. Gd₃Rh_1.940(7)In₄ adopts the hexagonal Lu₃Co_1.87In₄ type, space group , a = 781.4(5), c = 383.8(3) pm, wR2 = 0.0285, BASF = 0.375(1) (merohedric twinning via a twofold axis (xx0)), 648 F² values, 22 variables. The structure is derived from the well known ZrNiAl type through an ordering of rhodium and indium atoms on the Ni2 sites. The Rh/In ordering forces a reduction of the space group symmetry from to , leading to merohedric twinning for the investigated crystal. The Rh1 site has an occupancy of only 94.0(7)%. The investigated crystal had a composition Gd₃Rh_1.940(7)In₄. The main geometrical motif are three types of centered, tricapped trigonal prisms, i.e., [Rh1In2₆Gd₃], [Rh2Gd₆In2₃], and [In1Gd₆In2₃]. The shortest interatomic distances occur for Rh–In (276–296 pm) followed by In–In (297 pm). Together, the rhodium and indium atoms build up a three-dimensional [Rh_1.940(7)In₄] network, in which the gadolinium atoms fill slightly distorted pentagonal channels. The crystal chemistry of Gd₃Rh_1.940(7)In₄ is discussed on the basis of a group-subgroup scheme.     

Hydrothermal Synthesis and Optical Properties of ZnO Nanostructured Films Directly Grown from/on Zinc Substrates

Uniform ZnO nanorods arrays are grown directly from and on Zn foils in pure water under hydrothermal conditions at a relatively low temperature. The nanorods are 80–200 nm in diameter and ∼ 1 μm in length, which grow on the Zn foil along the [001] direction. By changing the pure water to a urea solution, a Zn compound ([Zn₅(OH)₆(CO₃)₂], a precursor of ZnO nanoflowers film, is created by self-assembly. The ZnO nanoflowers film can be easily obtained by heating the [Zn₅(OH)₆(CO₃)₂] compound in N₂ at 350∘C for 5–6 hours. Possible growth processes of the ZnO nanorods arrays and the [Zn₅(OH)₆(CO₃)₂] nanoflowers are discussed. Photoluminescence properties of the as-prepared ZnO nanostructures have been measured. The ZnO nanorods array synthesized using our method has minimal defects so that only band-gap emission is observed. However, the ZnO nanoflowers film, obtained by heating the [Zn₅(OH)₆(CO₃)₂] nanoflower precursor in N₂, is polycrystalline and displays strong defect-related emission.     

Synthesis, crystal structures and magnetic properties of Cu(II) compounds bridged by the terephthalate ligand and hydrogen bonds

A 3D network [Cu(tmen)(tp)(H₂O)₂]_n (1) (tmen = N,N,N′,N′-tetramethylethylenediamine; tp = terephthalate) and a 2D sheet [Cu(pyrazole)₂(tp)]_n (2), featuring 1D chains interwoven by hydrogen bonds, have been prepared and characterized by means of X-ray analyses and magnetic measurements. For 1, coordinative zigzag chains contain Cu(II) centers capped by the chelate ligand tmen, in which the tetragonal structure is elongated due to Jahn–Teller distortion. Coordinated water molecules are hydrogen-bonded to two free carboxylate oxygens of tp bridges, leading to the observed 3D structure. The use of the non-chelating capping ligand pyrazole produced the covalent-bonded 1D linear compound 2 with hydrogen bonds. A severe octahedral distortion of the Cu(II) center arises from a small bite angle (52.3(1)°) of two carboxylate oxygen atoms of tp, which are in turn hydrogen-bonded to the N–H groups of pyrazole ligands coordinated to Cu(II) atoms in neighboring chains. Magnetic data were fitted with the high-temperature series expansion for the Heisenberg chain spin Hamiltonian H = −J∑_iS_i · S_i + 1 together with consideration of the molecular field approximation (zJ′). Both compounds interestingly exhibit ferromagnetic interactions with g = 2.17, J = 4.08 cm⁻¹, zJ′ = −0.28 cm⁻¹ for 1 and g = 2.09, J = 1.47 cm⁻¹, zJ′ = −0.04 cm⁻¹ for 2. By taking into account structural parameters of distances between Cu atoms, it is reasonably assigned that the ferromagnetic couplings (J > 0) in these systems originate from the hydrogen bonds. The spin density of the d_x²-y² orbital on a Cu(II) atom in a chain is propagated and induced over the d_z² orbital of another Cu(II) atom in an adjacent chain. This orbital orthogonality gives rise to such interactions. The negative zJ′ term suggests that the tp bridges communicate only tiny antiferromagnetic interactions.     

Measurement of unbound cocaine in blood, brain and bile of anesthetized rats using microdialysis coupled with liquid chromatography and verified by tandem mass spectrometry

To investigate the disposition of unbound cocaine in the rat blood, brain and bile, we demonstrate an in vivo multiple sampling microdialysis system coupled with liquid chromatography for cocaine assay and verified by tandem mass spectrometry. Three microdialysis probes were concurrently inserted into the jugular vein, bile duct and brain striatum of each anesthetized rat. After a period of 2 h post-surgical stabilization, cocaine (10 mg kg(-1)) was administered through the femoral vein. Separation of unbound cocaine from various biological fluids was applied to a reversed-phase C(18) column (250 x 4.6 mm I.D., 5 microm). The mobile phase consisted of acetonitrile--10 mm potassium dihydrogen phosphate buffer (25:75, v/v, pH 4.0) and 0.8% diethylamine at a flow rate of 1 mL min(-1). The UV detector wavelength was set at 235 nm. The results indicate that cocaine penetrates the blood--brain barrier with a rapid distribution. However, unbound cocaine in the bile dialysate was not detectable in the UV detection. We therefore use LC--tandem mass spectrometry to detect the bile fluid after cocaine administration (3 mg kg(-1), i.v.). The results indicate that cocaine goes through hepatobiliary excretion.     

Chemical Constituents from the Root of Antidesma Pentandrum var. Barbatum

Investigation of the root extract of Antidesma pentandrum var. barbatum led to the isolation of seven new compounds, antidesmol ( 1 ), antidesmanins E ( 2 ) and F ( 3 ), antidesnone ( 4 ), antidesnol ( 5 ), barbatumols A ( 6 ) and B ( 7 ), together with 14 known compounds including sodium aristolochate‐I ( 10 ) and aristolochic acid‐I methyl ester ( 11 ).     

Hybrid Molecular Materials Based upon Organic π-Electron Donors and Inorganic Metal Complexes. Conducting Salts of Bis(ethylenediseleno)tetrathiafulvalene (BEST) with the Octahedral Anions Hexacyanoferrate(III) and Nitroprusside

The synthesis, structure and physical characterization of three new radical salts formed by the organic donor bis(ethylenediseleno)tetrathiafulvalene (BEDS-TTF or BEST) and the paramagnetic hexacyanoferrate(III) anion [Fe(CN)₆]³⁻ or the photochromic nitroprusside anion [Fe(CN)₅NO]²⁻ are reported: (BEST)₄[Fe(CN)₆] (1), (BEST)₃[Fe(CN)₆]₂·H₂O (2) and (BEST)₂[Fe(CN)₅NO] (3). Salts 1 and 3 show a layered structure with alternating organic (β-type packing) and inorganic slabs. Salt 2 shows an original interpenetrated structure probably due to the unprecedented presence of (BEST)²⁺ dications. The three salts are semiconductors although salt 1 exhibits a high room temperature conductivity and a semiconducting-semiconducting transition at ca. 150 K which has been attributed to a dimerization in the organic sublattice.