Self-assembly and enhanced photocatalytic properties of BiOI hollow microspheres via a reactable ionic liquid

BiOI uniform flowerlike hollow microspheres with a hole in its surface structures have been successfully synthesized through an EG-assisted solvothermal process in the presence of ionic liquid 1-butyl-3-methylimidazolium iodine ([Bmim]I). The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), nitrogen sorption, and diffuse reflectance spectroscopy (DRS). A possible formation mechanism for the growth of hollow microspheres was discussed. During the reactive process, ionic liquid not only acted as solvents and templates but also as an I source for the fabrication of BiOI hollow microspheres and was vital for the structure of hollow microspheres. Additionally, we evaluated the photocatalytic activities of BiOI on the degradation of methyl orange (MO) under visible light irradiation and found that as-prepared BiOI hollow microspheres exhibited higher photocatalytic activity than BiOI nanoplates and TiO(2) (Degussa, P25) did. On the basis of such analysis, it can be assumed that the enhanced photocatalytic activities of BiOI hollow microspheres could be ascribed to its energy band structure, high BET surface area, high surface-to-volume ratios, and light absorbance.     

Determination of the interaction enthalpy between microemulsion droplets by isothermal titration microcalorimetry

A new experimental design for the measurement of the real heat of dilution of the microemulsion droplets by isothermal titration microcalorimetry (ITC) has been reported and used to study the interaction enthalpies of the droplets for the system of water/sodium bis(2-ethylhexyl)-sulfosuccinate (AOT)/toluene. The results are in good agreement with those determined from light-scattering experiments.     

Mechanics of nanoindentation on a monolayer of colloidal hollow nanoparticles

We explore the collective mechanical behavior of monolayer assemblies composed of close-packed arrays of hollow silica nanoparticles using a spherical nanoindentor. Seven types of well-defined hollow nanoparticles are studied with their radii ranging from 100 to 300 nm and shell thickness ranging from 14 to 44 nm. Micromechanical models reveal the underlying deformation mechanisms during indentation, where the consecutive contacting of the indentor with an increasing number of nanoparticles results in a nonlinear increase in the indentation force with penetration depth. Each contacted hollow nanoparticle successively locally bends, flattens, and then locally buckles. The effective indentation modulus of the monolayer film, which is obtained by a Hertzian fit to the experimental data, is found to be proportional to the elastic modulus of the nanoparticle shell material and scales exponentially with the ratio of particle shell thickness t to radius R to the power of 2.3. Furthermore, we find that for a constant film density with the same (t)/(R) of the constituent nanoparticles, smaller particles with a thinner shell can provide a higher effective indentation modulus, compared to their larger diameter and thicker shell counterparts. This study provides useful insights and guidance for constructing high-performance lightweight nanoparticle films and coatings with potential applications in tailoring stiffness and mechanical energy absorption.     

1,3-二(1-二茂铁磺酰基-2-苯并咪唑)丙烷的合成、单晶结构和量子化学研究

合成了新型的1,3-二(1-二茂铁磺酰基-2-苯并咪唑)丙烷(BFBP).用红外光谱、核磁、质谱和X射线单晶衍射对其结构进行了表征.该晶体结构属正交晶系,空间群为Pnma,晶胞参数为:a=1.30079(13)nm,b=2.9627(3)nm,c=1.01257(10)nm,y=3.9023(7)nm3,Dc=1.49...     

Soft template synthesis of ZnO nanorods and their optical properties

A simple solution route was developed to fabricate monodisperse wurtzite ZnO nanorods. The as-prepared samples were 5 ??m in length and 70?C100 nm in diameter. The crystallinity, morphology, and structure of the rod-like ZnO microcrystals were examined. The crystal phases and the microstructure of the nanorods were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Room- and low-temperature photoluminescence (PL) and Raman spectra were employed to investigate the surface states of the samples. The deep-level emission band was barely observable at both room and cryogenic temperatures.     

Mild solution synthesis of plate-like and rod-like ZnO crystals

Micro-disks and micro-rods of ZnO were successfully synthesized by a mild solution process using zinc chloride as starting material. The morphology of the ZnO crystals changed substantially, depending on the concentrations of the Zn²⁺ ion and organic additives in the solution. A plate-like Zn₅(OH)₈Cl₂·H₂O precursor with a layered structure could be produced in solutions with high concentrations of chloride ions. The thermal stability, including phase composition and morphology, of the as-prepared Zn₅(OH)₈Cl₂·H₂O in air and water was investigated.     

Molecular self-modification: homolog of a manganese laundry bleach catalyst oxidatively transforms its tetradentate ligand into a novel hexadentate derivative

On the basis of mass spectral studies alone, the relatively new manganese complex, Mn(Et₂EBC)Cl₂ (Et₂EBC = 4,11-diethyl-1,4,8,11-tetraazabicyclo[6.6.2]hexadecane), a homolog of the well proven, peroxide-based laundry bleach, Mn(Me₂EBC)Cl₂, has been reported to undergo a sequence of 2-electron oxidation steps, ultimately converting its ethyl groups into chelated ethoxo and methylene carboxylato groups, [Mn^IV{(^?OCH₂CH₂)(^?O₂CCH₂)}EBC)](PF₆)₂. We report here the isolation and characterization of that unusual product, and provide insight into the remarkable catalytic pathway to its formation. At temperatures above 0 °C, oxidation by aqueous H₂O₂ reliably transforms Mn(Et₂EBC)Cl₂ into [Mn^IV{(^?OCH₂CH₂)(^?O₂CCH₂)}EBC)]²⁺. The experimental data for this intramolecular ethyl group transformation is consistent with oxygen insertion into a methyl C?CH moiety of the ethyl group, ?CNCH₂C(?CH)H₂, by the Mn^IV?COOH functional group.     

Synthesis, crystal structure and optical properties of the new lead fluoride borate—Pb2BO3F

A new compound, Pb₂BO₃F, has been grown by high temperature solution method from the PbO–PbF₂–B₂O₃ system for the first time. The crystal structure of this compound has been identified by single crystal X-ray diffraction analysis. It crystallizes in the hexagonal system, space group P6₃/m (No. 176) with unit-cell parameters a=7.2460(3) Å, c=14.5521(17) Å, Z=6, V=661.69(9) ų. Its structure was solved by the direct methods and refined to R₁=0.0163 and wR₂=0.0367. The structure of Pb₂BO₃F consists of the distorted PbO₃F₂ groups and BO₃ triangles, which are all symmetric with each other in the gestalt structure to the extent that the Pb₂BO₃F compound crystallizes in the symmetric space group. The powder X-ray diffraction pattern of the Pb₂BO₃F has been measured. The BO₃ functional groups presented in the sample were identified by FTIR spectrum. The DTA curve of Pb₂BO₃F suggests that Pb₂BO₃F melts congruently at 448 °C.     

Voltammetric sensing of paracetamol, dopamine and 4-aminophenol at a glassy carbon electrode coated with gold nanoparticles and an organophillic layered double hydroxide

A differential pulse voltammetric method was developed for the simultaneous determination of paracetamol, 4-aminophenol and dopamine at pH 7.0 using a glassy carbon electrode (GCE) coated with gold nanoparticles (AuNPs) and a layered double hydroxide sodium modified with dodecyl sulfate (SDS-LDH). The modified electrode displays excellent redox activity towards paracetamol, and the redox current is increased (and the corresponding over-potential decreased) compared to those of the bare GCE, the AuNPs-modified GCE, and the SDS-LDH-modified GCE. The modified electrode enables the determination of paracetamol in the concentration range from 0.5 to 400???M, with a detection limit of 0.13???M (at an S/N of 3). The sensor was successfully applied to the stimultaneous determination of paracetamol and dopamine, and of paracetamol and 4-aminophenol, respectively, in pharmaceutical tablets and in spiked human serum samples.

Solvothermal syntheses and crystal structures of two new thiogermanates [M(dap)3]4Ge4S10Cl4 (M?=?Co, Ni) with metal complexes as counterions

Abstract  

Two new transition-metal thiogermanates [M(dap)₃]₄Ge₄S₁₀Cl₄ (M = Co, Ni; dap = 1,2-propanediamine) have been solvothermally synthesized and structurally characterized. The two thiogermanates are isostructural and consist of discrete Ge₄S₁₀⁴⁻ adamantane-like ions, free Cl⁻ ions, and [M(dap)₃]²⁺ cations as counterions. The Ge₄S₁₀⁴⁻ anion is built from corner-sharing connection of four GeS₄⁴⁻ tetrahedra. Although some chalcogenidogermanates have been obtained by use of in situ generated transition-metal complexes as structure-directing agents under mild solvothermal conditions, their anions are usually dimeric [Ge₂Q₆]⁴⁻ (Q = S, Se) species. The new thiogermanates are rare examples of adamantane-like (Ge₄S₁₀⁴⁻) thiogermanates combined with transition-metal complexes. Their optical properties have been investigated by UV–Vis spectra.