梁的动力稳定性分析的有限元方法

提出了对梁进行动力学稳定性分析的有限元方法──给出了单元质量矩阵，抗弯刚度矩阵，几何刚度矩阵及相应的Ｍａｔｈｉｅｕ方程，通过坐标变换消除了方程的动力与静力耦合，然后说明了由这种具有参数激励耦合的多自由度系统的Ｍａｔｈｉｅｕ方程求得系统一般参数共振及组合参数共振的过渡曲线的约束参数方法与多尺度方法。最后作为算例求出了均匀简支梁受简谐轴向力作用时的过渡曲线。     

地质工程计算机辅助设计支持系统及其应用

地质工程设计具有非结构化、非参数化、非规范化特征,同时,也具有“风险与优化”性和“反馈与可变更”性。仅用一种固定的、程式化的求解方法是不现实的。因此,必须寻求一种非结构化的工具,根据问题的需要,面向目标自动生成求解结构。本文归纳了地质工程设计的基本内容,探讨了基于几何和基于人工智能的计算机辅助地质工程设计。最后,介绍了地质工程设计支持系统在长江三峡链子崖危岩治理工程设计中的应用。     

Regioselective Acceptorless Dehydrogenative Coupling of N‐Heterocycles toward Functionalized Quinolines,Phenanthrolines, and Indoles

A new strategy has been developed for the oxidant‐ and base‐free dehydrogenative coupling of N‐heterocycles at mild conditions. Under the action of an iridium catalyst, N‐heterocycles undergo multiple sp³ C? H activation steps, generating a nucleophilic enamine that reacts in situ with various electrophiles to give highly functionalized products. The dehydrogenative coupling can be cascaded with Friedel–Crafts addition, resulting in a double functionalization of the N‐heterocycles.     

Epigenetic Genome Mining of an Endophytic Fungus Leads to the Pleiotropic Biosynthesis of Natural Products

The small‐molecule biosynthetic potential of most filamentous fungi has remained largely unexplored and represents an attractive source for the discovery of new compounds. Genome sequencing of Calcarisporium arbuscula, a mushroom‐endophytic fungus, revealed 68 core genes that are involved in natural product biosynthesis. This is in sharp contrast to the predominant production of the ATPase inhibitors aurovertin B and D in the wild‐type fungus. Inactivation of a histone H3 deacetylase led to pleiotropic activation and overexpression of more than 75 % of the biosynthetic genes. Sampling of the overproduced compounds led to the isolation of ten compounds of which four contained new structures, including the cyclic peptides arbumycin and arbumelin, the diterpenoid arbuscullic acid A, and the meroterpenoid arbuscullic acid B. Such epigenetic modifications therefore provide a rapid and global approach to mine the chemical diversity of endophytic fungi.     

Fabrication and performance of microencapsulated phase change materials with hybrid shell by in situ polymerization in Pickering emulsion

Microencapsulated phase change materials (MePCMs) using melamine–formaldehyde resin/SiO₂ as shell were investigated in this paper. Organically modified SiO₂ particles were employed to stabilize Pickering emulsion, and in situ polymerization of melamine and formaldehyde was carried out to form hybrid shell. The performances of resultant MePCMs with hybrid shell were investigated comparatively with the MePCMs with polymer shell. SiO₂ particles raise the microencapsulation efficiency by improving the stability of emulsion and providing a precipitation site for melamine–formaldehyde resin. Also, the mechanical strength, thermal reliability, and anti‐osmosis performance of MePCMs were improved significantly by SiO₂ particles in the shell. Our study shows that Pickering emulsion is a simple and robust template for MePCMs with polymer‐inorganic hybrid shell. Copyright © 2015 John Wiley & Sons, Ltd.     

Effects of GC temperature and carrier gas flow rate on on‐line oxygen isotope measurement as studied by on‐column CO injection

Although deemed important to δ¹⁸O measurement by on‐line high‐temperature conversion techniques, how the GC conditions affect δ¹⁸O measurement is rarely examined adequately. We therefore directly injected different volumes of CO or CO–N₂ mix onto the GC column by a six‐port valve and examined the CO yield, CO peak shape, CO–N₂ separation, and δ¹⁸O value under different GC temperatures and carrier gas flow rates. The results show the CO peak area decreases when the carrier gas flow rate increases. The GC temperature has no effect on peak area. The peak width increases with the increase of CO injection volume but decreases with the increase of GC temperature and carrier gas flow rate. The peak intensity increases with the increase of GC temperature and CO injection volume but decreases with the increase of carrier gas flow rate. The peak separation time between N₂ and CO decreases with an increase of GC temperature and carrier gas flow rate. δ¹⁸O value decreases with the increase of CO injection volume (when half m/z 28 intensity is <3 V) and GC temperature but is insensitive to carrier gas flow rate. On average, the δ¹⁸O value of the injected CO is about 1‰ higher than that of identical reference CO. The δ¹⁸O distribution pattern of the injected CO is probably a combined result of ion source nonlinearity and preferential loss of C¹⁶O or oxygen isotopic exchange between zeolite and CO. For practical application, a lower carrier gas flow rate is therefore recommended as it has the combined advantages of higher CO yield, better N₂–CO separation, lower He consumption, and insignificant effect on δ¹⁸O value, while a higher‐than‐60 °C GC temperature and a larger‐than‐100 µl CO volume is also recommended. When no N₂ peak is expected, a higher GC temperature is recommended, and vice versa. Copyright © 2015 John Wiley & Sons, Ltd.     

Solvent‐dependent structural dynamics of 2(1H)‐pyridinone in light absorbing S4(ππ*) state

The B‐band resonance Raman spectra of 2(1H)‐pyridinone (NHP) in water and acetonitrile were obtained, and their intensity patterns were found to be significantly different. To explore the underlying excited state tautomeric reaction mechanisms of NHP in water and acetonitrile, the vibrational analysis was carried out for NHP, 2(1D)‐pyridinone (NDP), NHP–(H₂O)_n (n = 1, 2) clusters, and NDP–(D₂O)_n (n = 1, 2) clusters on the basis of the FT‐Raman experiments, the B3LYP/6‐311++G(d,p) computations using PCM solvent model, and the normal mode analysis. Good agreements between experimental and theoretically predicted frequencies and intensities in different surrounding environments enabled reliable assignments of Raman bands in both the FT‐Raman and the resonance Raman spectra. The results indicated that most of the B‐band resonance Raman spectra in H₂O was assignable to the fundamental, overtones, and combination bands of about ten vibration modes of ring‐type NHP–(H₂O)₂ cluster, while most of the B‐band resonance Raman spectra in CH₃CN was assigned to the fundamental, overtones, and combination bands of about eight vibration modes of linear‐type NHP–CH₃CN. The solvent effect of the excited state enol‐keto tautomeric reaction mechanisms was explored on the basis of the significant difference in the short‐time structural dynamics of NHP in H₂O and CH₃CN. The inter‐molecular and intra‐molecular ESPT reaction mechanisms were proposed respectively to explain the Franck–Condon region structural dynamics of NHP in H₂O and CH₃CN.Copyright © 2015 John Wiley & Sons, Ltd.     

Preparation of novel curcumin‐imprinted polymers based on magnetic multi‐walled carbon nanotubes for the rapid extraction of curcumin from ginger powder and kiwi fruit root

A novel molecularly imprinted polymer based on magnetic phenyl‐modified multi‐walled carbon nanotubes was synthesized using curcumin as the template molecule, methacrylic acid as the functional monomer and ethylene glycol dimethacrylate as the cross‐linker. The phenyl groups contained in the magnetic imprinted polymers acted as the assisting functional monomer. The magnetic imprinted polymers were characterized by scanning electron microscopy, Fourier‐transform infrared spectroscopy and vibrating sample magnetometry. Adsorption studies demonstrated that the magnetic imprinted polymers possessed excellent selectivity toward curcumin with a maximum capacity of 16.80 mg/g. Combining magnetic extraction and high‐performance liquid chromatography technology, the magnetic imprinted polymer based on magnetic phenyl‐modified multi‐walled carbon nanotubes was applied for the rapid separation and enrichment of curcumin from ginger powder and kiwi fruit root successfully.     

Separation of isorhamnetin 3‐sulphate and astragalin from Flaveria bidentis (L.) Kuntze using macroporous resin and followed by high‐speed countercurrent chromatography

D4020 resin offered the best dynamic adsorption and desorption capacity for total flavonoids based on the research results from ten kinds of macroporous resin. A column packed with D4020 resin was used to optimize the separation of total flavonoids from Flaveria bidentis (L.) Kuntze extracts. The content of flavonoids in the product was increased from 4.3 to 30.1% with a recovery yield of 90%. After the treatment with gradient elution on D4020 resin, the contents of isorhamnetin 3‐sulfate and astragalin were increased from 0.49 to 8.70% with a recovery yield of 74.1% and 1.16 to 30.8%, with a recovery yield of 92.2%, respectively. Further purification was carried out by one‐run high‐speed countercurrent chromatography yielding 4.5 mg of isorhamnetin 3‐sulfate at a high purity of 96.48% and yielding 24.4 mg of astragalin at a high purity of over 98.46%.     

Determination of neuroprotective oxysterols in Calculus bovis,human gallstones,and traditional Chinese medicine preparations by liquid chromatography with mass spectrometry

So far, the components responsible for the neuroprotective effects of Calculus bovis are unclear. Cholesterol, one of the major components in Calculus bovis, is easily oxidized into oxysterols, which possess direct or indirect neuroprotective effects proved by our and others’ previous studies. Therefore, a liquid chromatography with mass spectrometry method coupled with ultrasonic extraction and solid‐phase extraction was developed for the determination of neuroprotective oxysterols in Calculus bovis, human gallstones, and traditional Chinese medicine preparations. Chromatographic separation was achieved on a C₁₈ column with isocratic elution at a flow rate of 1 mL/min. The established method showed good linearity (R² > 0.998), sensitivity with low limits of detection (0.06–0.39 μg/g), acceptable precisions (relative standard deviations ≤ 7.4%), stability (relative standard deviations ≤ 5.9%), and satisfactory accuracy (92.4–102.9%) for all analytes identified by different retention times, which could be applied for the determination of oxysterols. Five kinds of oxysterols proved to function as neuroprotectants were detected at different concentrations. Among them, 7β‐hydroxycholesterol and cholestane‐3β,5α,6β‐triol were rather abundant in the samples. It could be concluded that the potential neuroprotective components in Calculus bovis may be these oxysterols.