Charge and discharge of methane on phenol-based carbon monolith

Methane adsorptions on various synthesized and commercial activated carbons were assessed in a volumetric apparatus for the design of an efficient adsorbed natural gas storage system. Based on the methane adsorption equilibrium results from different carbon based materials, a monolith was also produced from RP-20. Dynamic studies were also performed for the prepared monolith and the pelletized commercial Norit-B4 activated carbon. The temperature variation in RP-20 monolith was analyzed and compared with those of Norit-B4 and a blank test, which consisted of a run without a sample. The temperature variation in RP-20 monolith was quite high compared to that observed with Norit-B4 and the blank test because of a higher isosteric heat of adsorption and a high packing density.     

Networking of calixcrowns: from heteronuclear endo/exocyclic coordination polymers to a photoluminescence switch

Solvato-PL switching and shrinking-and-opening process: we present two CuI coordination polymers of calix[4]-bis-monothiacrown (L) obtained in the absence (1) and presence (2) of KI. The structures show not only very unusual CuI-based network arrangements but also unique reversible photolunimescence switching behavior induced by removal of coordinated solvent. Furthermore, upon inclusion of K+ ions the crown ring shrinks leading to "opening" of opposite aromatic rings in the host calixarene unit, rare behavior for this class of compound.     

Non-linear dynamics of stable carbon and hydrogen isotope signatures based on a biological kinetic model of aerobic enzymatic methane oxidation

The non-linear dynamics of stable carbon and hydrogen isotope signatures during methane oxidation by the methanotrophic bacteria Methylosinus sporium strain 5 (NCIMB 11126) and Methylocaldum gracile strain 14 L (NCIMB 11912) under copper-rich (8.9 µM Cu²⁺), copper-limited (0.3 µM Cu²⁺) or copper-regular (1.1 µM Cu²⁺) conditions has been described mathematically. The model was calibrated by experimental data of methane quantities and carbon and hydrogen isotope signatures of methane measured previously in laboratory microcosms reported by Feisthauer et al. [1 Feisthauer S, Vogt C, Modrzynski J, Szlenkier M, Krüger M, Siegert M, Richnow HH. Different types of methane monooxygenases produce similar carbon and hydrogen isotope fractionation patterns during methane oxidation. Geochim Cosmochim Acta. 2011;75:1173–1184. doi: 10.1016/j.gca.2010.12.006[Crossref], [Web of Science ®] , [Google Scholar]] M. gracile initially oxidizes methane by a particulate methane monooxygenase and assimilates formaldehyde via the ribulose monophosphate pathway, whereas M. sporium expresses a soluble methane monooxygenase under copper-limited conditions and uses the serine pathway for carbon assimilation. The model shows that during methane solubilization dominant carbon and hydrogen isotope fractionation occurs. An increase of biomass due to growth of methanotrophs causes an increase of particulate or soluble monooxygenase that, in turn, decreases soluble methane concentration intensifying methane solubilization. The specific maximum rate of methane oxidation υ_m was proved to be equal to 4.0 and 1.3 mM mM^?1 h^?1 for M. sporium under copper-rich and copper-limited conditions, respectively, and 0.5 mM mM^?1 h^?1 for M. gracile. The model shows that methane oxidation cannot be described by traditional first-order kinetics. The kinetic isotope fractionation ceases when methane concentrations decrease close to the threshold value. Applicability of the non-linear model was confirmed by dynamics of carbon isotope signature for carbon dioxide that was depleted and later enriched in ¹³C. Contrasting to the common Rayleigh linear graph, the dynamic curves allow identifying inappropriate isotope data due to inaccurate substrate concentration analyses. The non-linear model pretty adequately described experimental data presented in the two-dimensional plot of hydrogen versus carbon stable isotope signatures.     

Modeling and simulation of IEF in 2-D microgeometries

A 2-D finite-volume model is developed to simulate nonlinear IEF in complex microgeometries. This mathematical model is formulated based on the mass conservation and ionic dissociation relations of amphoteric macromolecules, charge conservation, and the electroneutrality condition. Based on the 2-D model, three different separation cases are studied: an IPG in a planar channel, an ampholyte-based pH gradient in a planar channel, and an ampholyte-based pH gradient in a contraction-expansion channel. In the IPG case, cacodylic acid (pK(1) = 6.21) and Tris (pK(1) = 8.3) are used as the acid and base, respectively, to validate the 2-D IEF model. In the ampholyte-based pH gradient cases, IEF is performed in the pH range, 6.21-8.3 using 10 ampholytes in the planar channel and 20 ampholytes in the contraction-expansion channel. The numerical results reveal different focusing efficiencies and resolution in the narrow and wide sections of the contraction-expansion channel. To explain this, the expressions for separation resolution and peak concentrations of separands in the contraction-expansion channel are presented in terms of the channel shape factor. In a 2-D planar channel, a focused band remains straight all the time. However, in a contraction-expansion channel, initially straight bands take on a crescent profile as they pass through the trapezoidal sections joining the contraction and expansion sections.     

Post-harvest HPLC determination of chlorfluazuron residues in pears treated with different programs

The present study was conducted to monitor the level of chlorfluazuron residues in pear samples in order to assess the risk posed by the presence of such residues to the consumer. Chlorfluazuron was sprayed onto pear trees at the recommended dose rate at two different times at 30 and 21 days prior to harvesting in one treatment, at 21 and 14 days prior to harvesting in another treatment, and three times at 30, 21 and 14 days prior to harvesting in a third treatment. Chlorfluazuron residues were extracted with acetonitrile and partitioned into ethyl acetate. The residue determination was performed on an Apollo C(18) column using HPLC with a UV detection of 254 nm following the clean-up of the extract by open column chromatography with Florisil. The versatility of this method was evidenced by its good linearity (>0.995) in the concentration range between 0.2 and 10 microg/mL. The majority of the mean recoveries at two different fortification levels, 0.05 and 0.25 ppm, ranged from 84.9 +/- 3.2 to 94.3 +/- 10.6, and the repeatability (as the relative standard deviation) from three repetitive determinations of recovery was between 3.8 and 11%. The calculated limit of detection (LOD) was 0.008 ppm and the limit of quantitation was 0.03 ppm. Trace amounts of chlorfluazuron were detectable when it was applied onto the pear trees at two or three times prior to harvesting; however, the levels of chlorfluazuron were not quantified. The excellent sensitivity and selectivity of this method allowed for quantitation and identification at low levels with a run time of less than 12 min. Chlorfluazuron can be used safely to protect pears when sprayed two or three times at 14 days prior to harvesting.     

Calix[4]bis(thiacrown): assembly of an endocyclic disilver(I) complex and exocyclic 3D copper(I) coordination polymers

Calix[4]bis(thiacrown-5) (L) with 1,3-alternating conformation was employed as a strong dinucleating ligand for the soft metal ions AgI and CuI. The reaction of L with AgPF6 afforded a discrete endo-coordinated disilver(I) complex 1, [Ag2L](PF6)2. In contrast, mixed products (2a + 2b) consisting of 3D networks were obtained from the reaction of L and CuI; 2b linked with a Cu4I4 cubane unit was shown to generate photoluminescence, while 2a linked with a Cu2I2 rhomboid unit does not.     

Synthesis of quinolines by ruthenium-catalyzed heteroannulation of anilines with 3-amino-1-propanol

Anilines react with 3-amino-1-propanol in dioxane in the presence of a catalytic amount of a ruthenium catalyst and tin(II) chloride dihydrate together with a hydrogen acceptor to afford the corresponding quinolines in moderate yields.     

Synthesis of spiroisoindolinones by palladium-catalyzed heterocyclization of 2-iodobenzoyl chloride with ketimines

2-Iodobenzoyl chloride reacts with ketimines in acetonitrile at 100° under carbon monoxide pressure in the presence of a catalytic amount of a palladium catalyst together with triethylamine to afford the corresponding spiroisoindolinones in high yields.     

Photochemical Crosslinking and Enzymatic Degradation of Poly(3‐hydroxyalkanoate)s for Micropatterning in Photolithography

Biodegradable poly(3‐hydroxyundecenoate) (PHU) films on silicon wafers were crosslinked with UV light under patterned masks. The films were crosslinked most efficiently when irradiated in the presence of diphenyl(2,4,6‐trimethylbenzoylphosphane oxide) as the initiator. Crosslinked patterns were developed with depolymerase solution because crosslinked PHU was degraded much more slowly than natural PHU. Patterned images with thicknesses of as low as 2.5 μm were obtained showing the potential application of PHU in microlithography as a photosensitive material, which is friendly to the environment.