Characterization and electrochemical investigation of boron-doped mesocarbon microbead anode materials for lithium ion batteries

The structure and anodic performance of boron-doped and undoped mesocarbon microbeads (MCMBs) have been comparatively studied and the results obtained by XPS, XRD, SEM, Raman spectroscopy and electrochemical measurements are discussed. It is found that boron doping introduces a depressed d ₀₀₂ spacing and the larger amount of "unorganized carbon", which induces vacancy formation in the graphite planes and leads to a quite different morphology from that of the undoped material. Electrochemical charge/discharge cycle tests indicated that after boron doping the lithium intercalation was carried through at a somewhat higher potential, being attended by greater irreversible capacity loss. Electronic Publication     

Synthesis of the C16-C35 fragment of integramycin using olefin hydroesterification as a linchpin reaction

[reaction: see text] The spiroketal unit of the HIV-integrase inhibitor integramycin has been prepared in an efficient and convergent manner. Key steps in this sequence include the use of ruthenium-mediated hydroesterification reactions of homoallylic alcohols and silyl ethers, and a C,O-dianionic addition into a lactone provides the spiroketal while minimizing protecting group manipulations.     

Synthesis of a Photolabeling Probe for the Study of Antiviral Mechanism of Ribavirin

Ribavirin has been used in urgency to treat SARS patients recently. In order to study its antiviral mechanism by photolabeling approach, we have synthesized and characterized 5-azido-1-β-D-ribofuranosyl-1,2,4-triazole-3-carboxiamide 1 as a photolabeling probe of ribavirin. The azidotriazole nucleoside showed rapid and clean photochemical reaction, suggesting that 1 is a promising probe to study the antiviral mechanism ofribarivin by photolabeling.     

双8-羟基喹啉端开链冠醚金属络合物的光物理性质

设计合成了双8-羟基喹啉端的开链冠醚QP3Q,研究了金属离子铝或锌与其形成络合物的组成和发光性质,并测定了络合物的激发态寿命.这些络合物在溶液中有较高的荧光量子产率,所得到的络合物固体具有较强的蓝光发光性能.结果表明,有可能通过QP3Q与不同离子形成的络合物得到不同发光波长的发光材料.     

流动分析法同时测定铬（Ⅵ）及铬（Ⅲ）过程中铈（Ⅳ）氧化剂的影响

以Ｃｅ（Ⅳ）为氧化剂，采用流动分析在线氧化技术，实现了对Ｃｒ（Ⅵ）和Ｃｒ（Ⅲ）的同时在线分析，发现Ｃｅ（Ⅳ）氧化剂在测定过程中产生负干扰，在而Ｃｒ（Ⅲ）存在时会使Ｃｒ（Ⅵ）的测定结果偏高，本文提出了一个校正模型，通过数学方法消除上述干扰，所建立的分析方法对Ｃｒ（Ⅵ）和Ｃｒ（Ⅲ）分析的平均相对误差不大于６．５％。     

镧系元素杂多钼磷酸钾的合成与性质研究

本文首次报道了K_(17)[Ln(P_2Mo_(17)O_(61))_2]·xH_2O(Ln=La~(3+),Ce~(3+),pr~(3+),Nd~(3+),Sm~(3+),Eu~(3+),Gd~(3+),Tb~(3+),Yb~(3+))的合成方法,取测定结果表明,与(?)系离子配位的配体P_2Mo_(17)O♂♀~-为α_2-型,Ln的配位数为8,推测其结构类似于K_(16)[Ce(Ⅳ)(α_2-P_2W_(17)O_(61))_2]·xH_2O,还进行了UV光谱、CV、极谱、TG-DTA及磁化率等性质的研究。     

Structure of inhomogeneous attractive and repulsive hard-core yukawa fluid: grand canonical Monte Carlo simulation and density functional theory study

A density functional theory is proposed for an inhomogeneous hard-core Yukawa (HCY) fluid based on Rosenfeld's perturbative method. The excess Helmholtz energy functional is derived from a modified fundamental measure theory for the hard-core repulsion and a quadratic functional Taylor expansion for the long-ranged attractive or repulsive interactions. To test the established theory, grand canonical ensemble Monte Carlo simulations are carried out to simulate the density profiles of attractive and repulsive HCY fluid near a wall. Comparison with the results from the Monte Carlo simulations shows that the present density functional theory gives accurate density profiles for both attractive and repulsive HCY fluid near a wall. Both the present theory and simulations suggest that there is depletion for attractive HCY fluid at low temperature, but no depletion is found for repulsive HCY fluid. The calculated results indicate that the present density functional theory is better than those of the modified version of the Lovett-Mou-Buff-Wertheim and other density functional theories. The present theory is simple in form and computationally efficient. It predicts accurate radial distribution functions of both attractive and repulsive HCY fluid except for the repulsive case at high density, where the theory overestimates the radial distribution function in the vicinity of contact.     

2-(苯并噻唑-2-基)-5-(N,N-二乙基氨基)苯酚衍生物的合成及其对H2S的识别

以4-N,N-二乙基氨基水杨醛为原料,制备了2-(苯并噻唑-2-基)-5-(N,N-二乙基氨基)苯酚衍生物(探针L),并对其结构进行了表征。在DMSO/PBS(体积比3∶7,pH=7.4)溶液中,探针L具有高选择性并可荧光"关-开"识别H_2S,在365nm紫外灯照射下,由无荧光变成蓝色荧光。实验表明,探针L识别H_2S的检测限为2.05×10~(-6)mol/L,pH适用范围为6～9,可用于检测实际水样中的H_2S。     

Self-assembling of helical poly(phenylacetylene) carrying L-valine pendants in solution, on mica substrate, and on water surface

In the present work, we investigated self-assembling of a poly(phenylacetylene) carrying L-valine pendants (PPA-Val) in a water/methanol solution, upon evaporation of the solution on mica, and on the water surface. With intercalation of a fluorescence probe of Ru(phen)2(dppx)2+ (phen = 1,10-phenanthroline, dppx=7,8-dimethyldipyridophenazine) into the hydrophobic cavities associated by the PPA-Val chains, their helical structures were directly detected in solution with an in situ fluorescence microscope. Helical aggregates were observed with AFM upon evaporation of the solvents, suggesting that the helical structures in the solution are the building blocks of the helical aggregates. Self-assembling structures of PPA-Val on the water surface were, however, very different from that formed upon evaporation of its THF solution on the mica surface. The polymer chains associated into a monolayer of extended fibers on the water surface, whereas superhelical fibers formed on the mica surface. Water molecules play a critical role in inducing the polymer to form diverse morphological structures in its bulk solution and on its surface. In solution, the isotropic hydrophobic effect drove the polymer chains to form superhelical aggregates, while on the water surface, the hydrophobic effect concentrated mainly on the lateral part of the polymer, thus giving a monolayer of extended fibers.     

金属酞菁化合物在TiO2表面的分散研究

Dispersion of copper(Ⅱ) phthalocyanine (CuPc), copper(Ⅱ) phthalocyaninesulfonate (CuPcS) and cobalt(Ⅱ)phthalocyaninetetrasulfonate (CoPcTS) on the surface of titanium dioxide was investigated by XRD, XPS, FT-IR and UV-Vis techniques. Results show that interaction between CuPc and TiO2 was very weak and CuPc was difficult to disperse on the surface of the support. While partly sulfurized CuPcS could be dispersed on the surface of support through sulfo-groups and its dispersion capacity was determined to be 0.085 g CuPcS/g TiO2. Completely sulfurlzed CoPcTS could also be dispersed on the surface of TiO2 as a monolayer and its dispersion capacity was 0.12 g CoPcTS/g TiO2. Interactions of the sulfo-groups as well as the electrons of CoPcTS with the surface of TiO2 could be evidenced by FT-IR characterization. Therefore, it was suggested that CoPcTS molecules be adsorbed on the surface of TiO2 in a flat-lying mode while CuPcS in a slanting one. UV-Vis spectra show that the dispersed CuPcS and CoPcTS molecules exist in both forms of monomers and dimers.