低反轰热阴极微波电子枪初步实验

 简述了紧凑型自由电子激光太赫兹源研制的系统设计方案,介绍了具有两路微波馈入的热阴极微波电子枪的研制与测试情况,利用束流传感器测试了束流强度,并利用CCD相机测试了束斑大小,给出了微波电子枪通过初步热测实验得到的结果。测得微波电子枪出口处束流强度超过500 mA,束斑约3 mm,采用双屏法测量束流发射度,得到归一化发射度约为13.5 π·mm·mrad,测试指标与理论设计值吻合较好。     

Highly hydrated poly(allylamine)/silica magnetic resin

The creation of multifunctional nanomaterials by combining organic and inorganic components is a growing trend in nanoscience. The unique size-dependent properties of magnetic nanoparticles (MNPs) make them amenable to numerous applications such as carriers of expensive biological catalysts, in magnetically assisted chemical separation of heavy metals and radionuclides from contaminated water sources. The separation of minor actinides from high-level radionuclide waste requires a sorbent stable in acidic pH, with ease of surface functionalization, and a high capacity for binding the molecules of interest. For the described experiments, the MNPs with 50 nm average size were used (size distribution from 20 to 100 nm and an iron content of 80–90 w/w%). The MNPs that have been double coated with an initial silica coating for protection against iron solubilization and oxidation in nitric acid solution (pH 1) and a second silica/polymer composite coating incorporating partially imbedded poly(allylamine) (PA). The final product is magnetic, highly swelling, containing >95% water, with >0.5 mmol amines g^?1 available for functionalization. The amine groups of the magnetic resin were functionalized with the chelating molecules diethylenetriaminepentaacetic acid (DTPA) and N,N-dimethyl-3-oxa-glutaramic acid (DMOGA) for separation of minor actinides from used nuclear fuel.     

Growth,spectroscopic and laser properties of Yb<Superscript>3<Emphasis Type="Bold">+</Emphasis></Superscript>-doped GdAl<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript> crystal: a candidate for infrared laser crystal

Yb³⁺:GdAl₃(BO₃)₄ (hereafter Yb³⁺:GAB) crystals with large sizes and good optical quality have been grown by the top-seed solution growth (TSSG) method. The polarized absorption and emission spectra have been investigated at room temperature. For the σ-polarization, the intensities of both absorption and emission spectra are stronger than those for the π-polarization, the σ-absorption cross section of Yb³⁺ in GAB being 3.43×10^-20 cm² at 977 nm, and the σ-emission cross section being 0.98×10^-20 cm² at 1045 nm. The fluorescence lifetime of the ² F _5/2→² F _7/2 transition was measured to be 800 μs in the 5% doped sample used for our laser experiments, 993 μs in a 10% doped sample and 569 μs in a 0.5% doped sample. The laser parameters were estimated as: β_min=0.022, I_sat=10.4 kW/cm² and I_min=0.23 kW/cm². About 0.4 W laseroutput at the wavelength of 1043 nm was achieved when the Yb³⁺:GAB crystal was pumped by a 974 nm laser diode, with 27.4% slope efficiency. PACS 42.55.-f; 42.70.Hj; 78.20.-e; 81.10.Dn     

Surface modifications of ITO electrodes for polymer light-emitting devices

Surface modifications were performed on the indium tin oxide (ITO) substrates for polymer light-emitting devices, using the different treatment methods including solvent cleaning, hydrochloric acid treatment and oxygen plasma. The influence of modifications on the surface properties of ITO electrodes were investigated by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), contact angle, and four-point probe. The surface energies of the ITO substrates were also calculated from the measured contact angles. Experimental results demonstrate that the surface properties of the ITO substrates strongly depend on the modification methods, and oxygen plasma more effectively improves the ITO surface properties compared with the other treatments. Furthermore, the polymer light-emitting electrochemical cells (LECs) with the differently treated ITO substrates as device electrodes were fabricated and characterized. It is observed that the surface modifications on ITO electrodes have a certain degree of influence upon the injection current, luminance and efficiency, but hardly upon the turn-on voltages of current injection and light emission which are close to the measured energy gap of electroluminescent polymer. Oxygen plasma treatment on the ITO electrode yields the better performance of the LECs, due to the improvement of interface formation and electrical contact of the ITO electrode with the polymer blend in the LECs.     

A study of optical properties of a four-level atomic system via vacuum-induced coherence effects

This paper studies the effects of vacuum-induced coherence(VIC) in a four-level atomic system.The effects of VIC lead to the coherent hole burnings exhibited in the system at some certain points of the Rabi frequency.This is also the reason for the enhancement of the coherent population trapping.In addition,optical bistability occurs in the evolution curves of absorption versus the phase of Rabi frequencies.     

氧族元素对D-A和D-π-A共聚物光吸收谱红移的第一性原理研究

D-A型共聚物作为有机聚合物太阳能电池的电子给体材料近年来引起广泛关注. 本文以苯并二噻吩(BDT)为电子给体单元, 苯并噻二唑(BT)为电子受体单元来模拟D-A共聚体; 并用噻吩环作为π桥, 构造出D-π-A(PBDT-DTBX, X = O, S, Se, Te)结构. 采用第一性原理的密度泛函理论, 系统地计算相应的电子结构和光吸收谱. 比较不同氧族元素和噻吩π-键桥对聚合物光吸收谱的影响. 研究结果表明: D-A共聚体中当X位元素以O, S, Se, T_e 替换时, 其体系的最高占有分子轨道(HOMO)能级变化不大, 最低未占有分子轨道(LUMO)能级逐渐靠近费米能级, 带隙逐渐减小. 在可见光区有两个较强的吸收峰, 随着X位元素原子序数增大, 位于4.0 eV左右的光吸收峰位基本不变, 另一光吸收峰强度明显增大并发生红移. 与D-A结构相比, D-π-A结构的带隙均有所减小, 其中X为Te时带隙最小; 光吸收峰强度随着氧族元素原子序数的增大也明显增大并发生红移. 通过比较光吸收系数和相应态密度, 结果表明, 4.0 eV 左右的光吸收峰主要是BDT单元的贡献, 氧族元素的改变主要影响519.4-703.9 nm范围的光吸收.     

酯基取代的吲哚衍生物的红外和荧光光谱研究

Tryptophan derivatives have long been used as site-specific biological probes. 4-Cyanotryptophan emits in the visible region and is the smallest blue fluorescent amino acid probe for biological applications. Other indole or tryptophan analogs may emit at even longer wavelengths than 4-cyanotryptophan. We performed FTIR, UV-Vis, and steady-state and time-resolved fluorescence spectroscopy on six ester-derivatized indoles in different solvents. Methyl indole-4-carboxylate emits at 450 nm with a long fluorescence lifetime, and is a promising candidate for a fluorescent probe. The ester-derivatized indoles could be used as spectroscopic probes to study local protein environments. Our measurements provide a guide for choosing esterderivatized indoles to use in practice and data for computational modeling of the effect of substitution on the electronic transitions of indole.     

HIAF BRing及高能外靶实验终端的辐射屏蔽设计

强流重离子加速器（HIAF）是中国科学院近代物理研究所自主研制的一台高能强流重离子加速器,它可以实现p到U的全离子加速。为了保证HIAF运行时的辐射安全,针对该装置的增强器（BRing）及高能外靶实验终端,利用蒙特卡洛程序FLUKA及外推法计算得到了加速p,C及U三种离子时所需的辐射屏蔽。结果表明,加速质子时所需屏蔽厚度最大,并以此为依据给出了全地下结构的屏蔽设计。在此基础上,提出了一种估算高能质子/重离子加速器束流均匀损失时横向屏蔽厚度的方法。结果显示,估算结果与FLUKA计算结果符合较好,验证了该方法的有效性和准确性。High Intensity heavy-ion Accelerator Facility (HIAF) is designed by the Institute of Modern Physics, Chinese Academy of Sciences, which can accelerate particles from proton up to uranium. To guarantee the radiation safety of HIAF during operation, the FLUKA code and extrapolation method were adopted to calculate the shielding thickness. The calculations were based on proton, carbon and uranium particles when losing on the Booster Ring (BRing) and the high-energy experimental terminal. The results indicate that the shielding thickness required for accelerating protons was the largest. Basing on the results, a method for estimating the lateral shielding of a high-energy proton/heavy-ion accelerator was proposed. A good agreement shows between the estimated results and the FLUKA calculated results, the validity and accuracy of the method were verified.     

具有Dzyaloshinskii-Moriya相互作用的XY模型的量子相干性

研究了具有Dzyaloshinskii-Moriya(DM)相互作用的一维横场XY自旋链的量子相变和量子相干性.采用约旦-维格纳变换严格求解了哈密顿量,并描绘了体系的关联函数和相图,相图包含反铁磁相、顺磁相和螺旋相.利用相对熵和Jensen-Shannon熵讨论了XY模型的量子相干性.研究发现,相对熵与Jensen-Shannon熵所表现的行为都可以很好地表征该模型的量子相变.非螺旋相中量子相干性不依赖DM相互作用,而在螺旋相DM相互作用对量子相干性有显著影响.此外,指出了在带有DM相互作用的这一类反射对称破缺体系中关联函数计算的常见问题.