On the kinetics of the capillary imbibition of a simple fluid through a designed nanochannel using the molecular dynamics simulation approach

A molecular dynamics (MD) approach was employed to simulate the imbibition of a designed nanopore by a simple fluid (i.e., a Lennard-Jones (LJ) fluid). The length of imbibition as a function of time for various interactions between the LJ fluid and the pore wall was recorded for this system (i.e., the LJ fluid and the nanopore). By and large, the kinetics of imbibition was successfully described by the Lucas-Washburn (LW) equation, although deviation from it was observed in some cases. This lack of agreement is due to the neglect of the dynamic contact angle (DCA) in the LW equation. Two commonly used models (i.e., hydrodynamic and molecular-kinetic (MK) models) were thus employed to calculate the DCA. It is demonstrated that the MK model is able to justify the simulation results in which are not in good agreement with the simple LW equation. However, the hydrodynamic model is not capable of doing that. Further investigation of the MD simulation data revealed an interesting fact that there is a direct relationship between the wall-fluid interaction and the speed of the capillary imbibition. More evidence to support this claim is presented.     

Considering the effect of different arrangements of pentagons on density of states of capped carbon nanotubes

We have used a non-equilibrium surface Green's function matching formalism combined with a tight-binding Hamiltonian to consider the effect of different arrangements of pentagon rings on localization of density of states at the tip regions of semi-infinite capped carbon nanotubes. The transfer matrixes are obtained by an iterative procedure. The results demonstrate that the positions of the peaks near Fermi energy are remarkably affected by the relative locations of pentagons. It is observed that in thin nanotubes, carbon atoms belonging two neighboring pentagon rings have significant contribution in the localized states near fermi energy. From our calculations, it turns out that the metallic or semiconducting behavior of capped nanotubes in the tip regions depends on the metallic or semiconducting nature of their nanotube stems.     

High-pressure phases of hydrogen cyanide: formation of hydrogenated carbon nitride polymers and layers and their electronic properties

We have performed a set of first-principles simulations to consider the possible phase transitions in molecular crystals of HCN under high pressure. Our calculations reveal several transition paths from the orthorhombic phase to tetragonal and then to triclinic phases. The transitions from the orthorhombic to the tetragonal phases are of the second order, whereas those from the tetragonal to the triclinic phases turn out to be of the first-order type and characterized by an abrupt decrease in volume. Our calculations show that, by adjustment of the temperature and pressure of the HCN molecular crystal, novel layered and polymeric crystals with insulating, semiconducting or metallic properties can be found. Based on our simulation results, two different crystal formation mechanisms are deduced. The stabilities of the predicted structures at ambient pressure are further assessed by performing phonon or MD simulations. In addition, the electron transport properties of the predicted polymers are obtained using the non-equilibrium Green's function technique combined with density functional theory. The results show that the polymers have metallic-like I-V characteristics.     

Compact apparatus for rapid measurement of high-pressure phase equilibria of carbon dioxide expanded liquids

A new apparatus based on a synthetic method was developed for phase equilibrium measurements. The characteristic features of the apparatus are its light weight (ca. 288 g), variable-volume with a free piston, position sensing device for the piston, precise pressure and temperature control, and a window for visual observation. The inner volume of the cell can vary from 2.5 to 8.8 cm³. The cell was constructed from titanium so that the composition of the sample can be determined by direct weighing of the cell. The apparatus was designed for temperatures up to 473 K and pressures up to 25 MPa.     

Synthesis and properties of copolymers of methyl methacrylate with 2,3,4,5,6‐pentafluoro and 4‐trifluoromethyl 2,3,5,6‐tetrafluoro styrenes: An intrachain interaction between methyl ester and fluoro aromatic moieties

2,3,4,5,6‐Pentafluoro and 4‐trifluoromethyl 2,3,5,6‐tetrafluoro styrenes were readily copolymerized with methyl methacrylate (MMA) by a free radical initiator. The copolymers were soluble in tetrahydrofuran and acetone. The films obtained were transparent and flexible. The glass transition temperatures (T_gs) of the copolymers were found positively deviated from the Gordon–Taylor equation. The positive deviation could be accounted for by dipole–dipole intrachain interaction between the methyl ester group of MMA and the highly fluorinated aromatic moiety, which resulted in a decrease in the segmental mobility of the polymer chains and the enhanced T_g values of the copolymers. The water absorption of PMMA was greatly decreased by copolymerization of MMA with the highly fluorinated styrenes. With as little as 10 mol % of pentafluoro styrene content in the copolymer, the water absorption was decreased to one‐third of that for pure PMMA. The fluorinated styrenes‐MMA copolymers were thermally stable up to 420 °C under air and nitrogen atmospheres. With 50 mol % of MMA in the copolymer, the copolymer was still stable up to 350 °C. Since these copolymers contain a large number of fluorine atoms, the light absorption in the region of the visible to near infrared is decreased in comparison with nonfluorinated polymers. Thus, these copolymers may be suitable for application in optical devices, such as optical fibers and waveguides. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Optimization of mark edge recording waveform for a phase change rewritable optical disk using a 680 nm laser diode

A high density mark edge recording method on a phase change rewritable disk is reported. A carrier-to-noise ratio of 55 dB for a mark length of 0.55,μm is obtained by using a 680 nm, NA 0.6 head and a phase change rewritable disk. In mark edge recording, it is necessary to record each mark in correct length. A new laser power modulation pattern is proposed. This pattern consists of a first-pulse, a multi-pulse chain and a last-pulse. Both positions of the first-ptilse and the last-pulse are movable. By adjusting these positions, a jitter, σ/T_w (T_w is window margin), is improved to 6.5% in high density EFM (Eight to Fourteen Modulation) recording of 0.4 μm/bit.     

Versatile synthesis of epicatechin series procyanidin oligomers, and their antioxidant and DNA polymerase inhibitory activity

Proanthocyanidins, known as condensed tannins or oligomeric flavonoids, exist in many edible plants and show various interesting biological activities. We have developed a simple and versatile method of synthesizing procyanidin oligomers consisting of (−)-epicatechin and (+)-catechin. This method is applicable to the synthesis of various 3-O-substituted oligomers. We report here the stereoselective and length controlled synthesis of [4-8]-condensed (−)-epicatechin series procyanidin oligomers. We described the details of the synthesis of an two tetramers, (−)-epicatechin-(−)-epicatechin-(−)-epicatechin-(−)-epicatechin and (−)-epicatechin-(−)-epicatechin-(−)-epicatechin-(+)-catechin (arecatannin A1), (−)-epicatechin pentamer and two 3,3″,3?-tri-O-galloyl trimers, (−)-epicatechin-(−)-epicatechin-(−)-epicatechin-3,3″,3?-tri-O-gallate and (−)-epicatechin-(−)-epicatechin-(+)-catechin-3,3″,3?-tri-O-gallate with the condensation method using TMSOTf as a catalyst. The ability of DPPH radical scavenging activity and DNA polymerase inhibitory activity of these oligomeric compounds were investigated.