Preparation and properties of polyarylates from 5-t-butylisophthaloyl chloride and various bisphenols

Polyarylates containing a t-butyl pendant group were prepared from 5-t-butylisophthaloyl chloride and various bisphenols through the phase-transfer catalyzed two-phase polycondensation. The polyarylates having inherent viscosities up to 3.1 dL/g were obtained quantitatively. They were readily soluble in various solvents such as chloroform, m-cresol, and pyridine. Coloreless, transparent, and flexible films could be cast from the chloroform solutions of the polymers. The polyarylates had glass transition temperatures between 210 and 320°C, and did not lose weight below 350°C, with 10% weight loss being recorded at 395–450°C in air.     

Simultaneous determination of sulfamethoxazole and trimethoprim in human plasma by capillary zone electrophoresis

A capillary electrophoretic method for the simultaneous determination of sulfamethoxazole and trimethoprim in plasma was developed. Sulfamethoxazole and trimethoprim extracted from human plasma with ethyl acetate were analyzed at 20 kV and 25 degrees C using 15 mm phosphate buffer (pH 6.2) as the electrolyte. The detection was by UV at 220 nm. The run time was 8.0 min and the limit of quantification was 10.00 microg/mL for sulfamethoxazole and 2.00 microg/mL for trimethoprim. The recovery was >99% for both compounds. This method enabled the detection of sulfamethoxazole and trimethoprim in plasma of patients after oral ingestion of their combined formulation. The present simple and rapid method is applicable to drug monitoring in immunocompromised patients who are taking the combined formulation of these compounds for the treatment or prophylaxis of Pneumocystis carinii pneumonia.     

Intramolecular oxyselenenylation and deselenenylation reactions in water, conducted by employing polymer-supported arylselenenyl bromide

After immobilizing arylselenenyl bromide on polymer resin, the oxyselenenylation reaction of olefin was carried out in water. An amphiphilic polymer-supported arylselenenyl bromide was employed, and various intramolecular oxyselenenylation and deselenenylation reactions proceeded smoothly in water in fair chemical yields (up to an 83% yield).     

Polydimethylsiloxane connection for quartz microchips in a high-pressure system.

An interconnecting technique, the "PDMS connection method", for quartz microchips in a high-pressure system is presented. The connection between quartz microchips is an essential technology for modular microfluidic devices, such as microchip-HPLC. PDMS was applied to the seal material, being spread on the seal side of the chips, and set into the metal housing. The characteristics of the PDMS connection method concerning pressure resistance and the extension of the peak were examined. The experimental results showed a good seal at 5 MPa, which seem to be sufficient for realizing microchip-HPLC utilizing a monolithic silica capillary column as a separation medium. The influence of the extra column effect on chromatographic separation was almost the same as in the case using a commercial union fitting. In addition, the PDMS connection enabled the detachability of chip-based modules with user-friendliness. Our experimental findings suggest that the novel PDMS connection method can possibly be applied as a generic technology in high-pressure microTAS.     

Synthesis and Crystal Structure of p-tert-Butylthiacalix[8]arene: A New Member of Thiacalixarenes

Even though it was obtained in poor yield, p-tert-butylthiacalix[8]arene (TC8A) has been synthesized as a new member of thiacalix[n]arenes by the terephthalate-induced cyclization of a mixture of acyclic oligomers, which was obtained by the reaction between p-tert-butylphenol and sulfur with CaO in ethylene glycol/diphenyl ether system. Slow evaporation of the chloroform solution of TC8A afforded guest-free crystals consisting of TC8A itself. The close-packed crystal structure of TC8A resembles that of p-tert-butylcalix[8]arene (C8A) closely, containing a plated loop molecular structure.This revised version was published online in July 2005 with a corrected issue number.     

Synthesis and properties of segmented aromatic poly(ether sulfone)-amide and poly(ether sulfone)-imide copolymers

New segmented aromatic poly(ether sulfone)-amide and poly(ether sulfone)-imide copolymers were synthesized by the chain extension of α,w-diamine-terminated poly(ether sulfone) oligomer with both aromatic dicarboxylic acid chlorides and tetracarboxylic dianhydrides, respectively. Crystallization of the poly(ether sulfone)unit was suppressed by the introduction of amide or imide linkage along the polymer backbone, giving amorphous copolymers that were +eadily soluble in various organic solvents. The copolymers had somewhat higher glass transition temperatures than the parent poly(ether sulfone). They afforded transparent and tough films by solution casting. © 1992 John Wiley & Sons, Inc.     

Determination of a polymeric hindered amine light stabilizer in polypropylene formulated with magnesium hydroxide flame retardant by reactive thermal desorption-gas chromatography.

A polymeric hindered amine light stabilizer (HALS), Tinuvin 622 (MW [symbol: see text] 4000), in PP materials formulated with a magnesium hydroxide flame retardant was determined by reactive thermal desorption (RTD) gas chromatography (GC). Two kinds of the HALS components that were formed through the RTD in the presence of tetramethylammonium hydroxide [(CH3)4NOH, TMAH] were clearly observed in the chromatograms of the PP samples, with negligible interference from the other additives and the PP substrate. Here, the coexisting flame retardant was proved to affect significantly the RTD process of the occluded HALS. As a result, the recovery of the HALS components in the RTD-GC chromatograms of the PP samples increased with increase in the content of the flame retardant. This enhancement of the HALS recovery is attributed mainly to the preferential exposure of the HALS on the surface of the ground PP sample through the interaction between the polymeric HALS and the flame retardant in the molten PP during kneading. In spite of such a considerable action of the flame retardant, the observed intensities of the characteristic peaks of HALS by RTD-GC showed a good linear relationship with the HALS content in the PP samples with constant content of the flame retardant (50 phr); this relationship could be used as the calibration line for the determination of the polymeric HALS in the PP materials containing the flame retardant.     

Facile routes to natural acyclic polyenes syntheses of spilanthol and trail pheromone for termite

The synthetic procedures for spilanthol and trail-following pheromone for a southern subterranean termite were described. The syntheses heavily depend on the new diene synthesis using titanium reagent.     

Multi-component coupling synthesis of polycyclic pyrrole derivatives via Ir- and Rh-catalyzed cycloisomerizations with microwave heating

CuBr₂-catalyzed three-component coupling of N-benzylallylamine, ethyl glyoxalate, and terminal alkynes afforded glycinate-tethered 1,6-enynes, which were further transformed into polycyclic pyrrole-2-carboxylates via iridium-catalyzed cycloisomerization/Diels-Alder cycloaddition/dehydrogenation sequence under conventional and microwave heating conditions. The corresponding β-amino acid analogues were obtained from the Ir-catalyzed reaction of enynes prepared from lithium amides of allylamines with methyl non-2-en-4-ynoate. The Cu-catalyzed Mannich-type condensation was further extended to the synthesis of the glycinate-tethered dienyne and cyclopropylenyne, which were subjected to Rh-catalyzed cycloisomerizations to furnish bicyclic amino acids.     

Bromination by means of sodium monobromoisocyanurate (SMBI)

A variety of aromatic compounds with both activating and deactivating substituents were brominated with sodium monobromoisocyanurate (SMBI) 1, diethyl ether, diethyl ether-methanesulfonic acid, trifluoroacetic acid, or sulfuric acid were employed as solvents. Thus nitrobenzene was conveniently brominated in sulfuric acid, benzene was readily monobrominated in diethyl ether-methanesulfonic acid, and phenol was selectively brominated at the ortho position under mild conditions in refluxing diethyl ether. With substituents that are easily protonated, trifluoroacetic acid may be employed as solvent in the reaction with 1, in contrast NBS was ineffective in trifluoroacetic acid. This renders 1 a superior reagent relative to NBS. In addition to aromatics, alkenes, ketones and esters were also brominated with 1. Diethyl malonate was brominated with 1 and then subjected to a Bingel reaction with NaH to afford the desired methanofullerene in reasonable yield.