Cross-metathesis reaction of vinyl sulfones and sulfoxides

Cross-metathesis reactions of α,β-unsaturated sulfones and sulfoxides in the presence of molybdenum and ruthenium pre-catalysts were tested. A selective metahesis reaction was achieved between functionalized terminal olefins and vinyl sulfones by using the ‘second generation’ ruthenium catalysts 1c-h while the highly active Schrock catalyst 1b was found to be functional group incompatible with vinyl sulfones. The cross-metathesis products were isolated in good yields with an excellent (E)-selectivity. Both the molybdenum and ruthenium-based complexes were, however, incompatible with α,β- and β,γ-unsaturated sulfoxides.     

Microchip-based immunoassay system with branching multichannels for simultaneous determination of interferon-gamma

A bead-bed immunoassay system suitable for simultaneous assay of multiple samples was constructed on a microchip. The chip had branching multichannels and four reaction and detection regions; the constructed system could process four samples at a time with only one pump unit. Interferon gamma was assayed by a 3-step sandwich immunoassay with the system coupled to a thermal lens microscope as a detector. The biases of the signal intensities obtained from each channel were within 10%, and coefficients of variation were almost the same level as the single straight channel assay. The assay time for four samples was 50 min instead of 35 min for one sample in the single-channel assay; hence higher throughput was realized with the branching structure chip.     

Separation of silver from waste waters by ion-exchange resins and concentration by microbial cells

Summary Waste waters of film processing plants are rich with silver. Part of the silver is regenerated electrochemically, but the rest (0.5 g) remains in waste waters and is sent to sewers. This is a bad politic from both the environmental (toxic waste waters) and the economical point of view (a waste of silver). In this work, the silver was isolated by ion-exchange resins and then concentrated by microorganisms. For exchange of silver, Ionenaustauscher I, II and IV were used. The batch method was used to obtain a static equilibrium. Silver elution from exchangers is based on silver transformation to a stable cation or anion complex. By varying the ligands, pH and eluent concentrations, optimum elution is found at 1 mol/l Na₂S₂O₃, 1 mol/l NH₃, 2 mol/l HNO₃ and 1 mol/l (NH₂)₂CO. The concentration of silver in the eluent is about 50 mg/l. The silver ion uptake from solutions after ion exchange by mixed bacterial culture isolated from photographic waste water drain and pure bacterial cultures Escherichia coli 3009 and Bacillus subtilis 3053. was studied. Experiments were carried out in submerse culture at pH 7 with different Ag⁺ concentrations (4, 8 and 40 mg/l) on a rotary shaker (100 rpm) at 37°C. At the lower Ag⁺ concentrations a good growth and simultaneous removal of Ag⁺ from the solutions was achieved. At Ag⁺ concentration of 40 mg/l growth and removal of Ag⁺ by mixed and pure culture differed significantly. Thus mixed bacterial culture grew well and at the same time removed efficiently Ag⁺ (approximately 90%) from medium. Pure bacterial cultures on the contrary were unable to grow at 40 mg/l Ag⁺, though their biomass showed to be an effective biosorbent for Ag⁺ (approximately 80% of Ag⁺ removal).     

Palladium-catalyzed preparation of α-allyl esters and α,β-unsaturated esters from saturated esters via their silyl acetals

Reaction of ketene silyl acetals with allylic carbonates in the presence of palladium-phosphine catalyst in dioxane gives α-allyl esters in high yields. When the reaction is carried out with phosphine-free palladium catalyst in nitriles, α,β-unsaturated esters are obtained in good yields.     

Versatile high-performance liquid chromatographic computer system for solvent delivery, gradient control and data acquisition using the Commodore 64 personal computer

An interface for a high-performance liquid chromatographic system based on the Commodore 64 personal computer has been designed as an alternative to the expensive and somewhat inflexible solvent programmers and data acquisition systems offered by commercial manufacturers. The system consists of the Commodore 64 with a single disk drive and monitor, and an interface that directly controls the flow-rates of two Waters pumps for solvent delivery in either isocratic or gradient mode, as well as analog-to-digital conversion of chromatographic data and either graphic data output to a dot-matrix printer or digital-to-analog conversion for output to a chart recorder. The interface permits computer-controlled flow-rates of up to 10.0 ml/min, with an accuracy of 0.0047 ml/min at flow-rates of 4.1 ml/min and an accuracy of 0.03 ml/min at flow-rates of 10 ml/min. The software for data analysis permits tabulation of elution times and areas for the peaks in a chromatogram with an option for baseline correction. The data are stored on floppy disks together with information pertinent to the chromatogram (flow-rate, solvent composition, etc.).     

Excitation-energy migration in self-assembled cyclic zinc(II)-porphyrin arrays: a close mimicry of a natural light-harvesting system

The excitation-energy-hopping (EEH) times within two-dimensional cyclic zinc(II)-porphyrin arrays 5 and 6, which were prepared by intermolecular coordination and ring-closing metathesis reaction of olefins, were deduced by modeling the EEH process based on the anisotropy depolarization as well as the exciton-exciton annihilation dynamics. Assuming the number of energy-hopping sites N = 5 and 6, the two different experimental observables, that is, anisotropy depolarization and exciton-excition annihilation times, consistently give the EEH times of 8.0 +/- 0.5 and 5.3 +/- 0.6 ps through the 1,3-phenylene linkages of 5 and 6, respectively. Accordingly, the self-assembled cyclic porphyrin arrays have proven to be well-defined two-dimensional models for natural light-harvesting complexes.     

Manganese(III) acetate mediated synthesis of 3-trifluoroacetyl-4,5-dihydrofurans and 3-(dihydrofuran-2(3H)-ylidene)-1,1,1-trifluoroacetones by free radical cyclization. Part 1

2-Trifluoroacetyl-4,5-dihydrofurans were obtained by manganese(III) acetate mediated radical cyclization of trifluoromethyl-1,3-dicarbonyl compounds (1a-c) with conjugated alkenes (2a-h). The reaction of 1,1,1-trifluoropentane-2,4-dione (1a) with propenylbenzene and 1,1-diphenyl-1-butene surprisingly yielded 3-(dihydrofuran-2(3H)-ylidene)-1,1,1-trifluoroacetones besides 3-trifluoroacetyl-4,5-dihydrofurans.     

Effects of temperature and sodium carboxylate additives on mineralization of calcium oxalate in silica gel systems

Urolithiasis remains a major medical problem in China, especially in Guangdong Province in the southest of China[1]. A survey in Shenzhen city, the most southern city in China, showed the incidence of renal calculus was 4.87%, being 6.12% in the males and 4.07% in the females[2]. The prevalence of renal calculus has been more as the age advances and in the male population and so was in the less-educated population. The recurrence rate is more than 80%, with a moderate improvement by conventi…     

Crystalline orientation of the InN films prepared by atmospheric pressure halide chemical vapor deposition

The structural analysis of the hexagonal InN film prepared on a Si(100) substrate by the AP-HCVD technique using InCl₃ and NH₃ as starting materials were carried out by the X-ray pole figure analysis. The deposited films consist of the hexagonal InN pillar crystals. It was found that the pillar crystals, which have random rotation around the 100 axis, were grown at an angle of 70–90° to the substrate.