Synthesis and optical resolution of a series of inherently chiral calix[4]crowns with cone and partial cone conformations

A series of inherently chiral calix[4]arenes with cone and partial cone conformations and with crown ether moieties of variable size have been readily synthesized. By taking advantage of the carboxy appendage on the lower rim, these were condensed with the chiral auxiliary (S)-BINOL to form diastereomers which, in most cases, could be separated by preparative TLC, or more desirably, by column chromatography on silica gel (diastereomeric excess >99 % based on HPLC analysis). Seven enantiopure antipodes of inherently chiral calix[4]crowns were obtained after hydrolysis. It has been found that both the size of the crown moiety and alkylation of the last phenolic hydroxy group (accompanied with or without a change in the conformation) affect the separation of the diastereomers.     

Adsorption energy distribution model for VOCs onto activated carbons

An adsorption isotherm model was proposed for two types of volatile organic compounds (VOCs) on a heterogeneous carbon surface. The Langmuir isotherm was used as a local isotherm for describing heterogeneous surfaces to obtain the adsorption energy distribution. The adsorption temperature studied ranged from 30 to 50 degrees C, and the pressure of VOCs varied from 0 to 0.35 atm. The present model differed from previous studies in assuming that the pre-exponential factor was not to be a constant. The pre-exponential factors were determined directly from the experimental data, and the result empirically showed that the pre-exponential factor was correlated with the adsorption energy by a simple exponential function. We found that both adsorption energy distributions of two VOCs were essentially step functions over the restricted pressure range, indicating adsorbates on the carbon surface with its own uniform distribution. By incorporation of the energy distribution and the relationship between the pre-exponential factor and the adsorption energy, the adsorption isotherms for the two VOCs on the carbons can be well predicted.     

DOPING LEVEL INCREASE OF POLY(3-METHYLTHIOPHENE)FILM DURING ELECTROCHEMICAL POLYMERIZATION PROCESS

The Raman spectra of poly(3-methylthiophene) (PMeT) films with different thicknesses, which have beenelectrochemically deposited on a flat stainless steel electrode surface by direct oxidation of 3-methylthiophene in borontrifluoride diethyl etherate (BFEE) at a constant applied potential of 1.38 V (versus SCE), have been investigated byexcitation with a 633-nm laser beam. The spectroscopic results demonstrated that the doping level of PMeT film wasincreasing during film growth. This finding was also confirmed by electrochemical examination. Moreover, the Raman bandsassigned to radical cations and dications in doped PMeT films were found approximately at 1420 and 1400 cm~(-1),respectively. Radical cations and dications coexist on the backbone of PMeT as conductive species and their concentrationsincrease with the increase of doping level. Successive cyclic voltammetry was proved to be an effective approach toimproving the doping level of as-grown thin compact PMeT film.     

STABILITY OF POLY（N,N＇-METHYLENEBISACRYLAMIDE-co-4-VINYLPYRIDINE） MICROGEL DISPERSION AND ADJUSTMENT OF THE HYDROPHOBICITY IN THE MICROGELS

In the UV-Vis spectra of pure light-scattering systems, there is an exponential relationship between absorbance and wavelength （A = Kλ^-n）. Here, the exponent n is named as flocculation-coagulation parameter. In the present paper, the effects of different additives on the stability of poly（N,N＇-methylenebisacrylamide-co-4-vinylpyridine） （poly（Bis-co-4-VP）） microgel dispersion were studied in detail via this parameter. The results showed that the stability of the dispersion mainly comes from the ionization of pyridine groups, making the microgel positively charged on its surface. This was confirmed by the measurement of Zeta potential and the result of conductometric titration. The result of fluorescence analysis indicated that the hydrophobicity in the microgels is enhanced with the increase in total 4-VP unit content.     

Electron Paramagnetic Resonance Study of Radical Pairs and Isolated Radicals Trapped in Irradiated Long-Chain Hydrocarbons at Low Temperatures

The intrinsic characteristics of radical pairs produced in squalane and in cetane receiving high gamma-dose are extensively studied with the EPR technique at temperatures from 77°K up to 150°K. The spectra of the paired radicals occur at g=4 with a very low transition probability in contrast to that of isolated radicals which appear at g=2 A well-resolved hyperfine spectrum corresponding to the species (CH₃CH₂.CH₂CH₃) is observed in cetane. The isothermal decay rates of radical pairs in cetane below 100°K are significantly slow; however, the decay kinetics at 150°K is first order with rate constant=1.86 min^?1. A relatively slower decay rate is obtained for isolated radicals suggesting that the decay mechanism of paired radicals is through geminate recombination. The relative inter-radical distance in radical pairs is known from a decay curve as a function of temperature. The yields of radical pairs are low in both matrices, only few percents of those of isolated radicals. The formation mechanisms of paired radicals with direct radiolytic bond scission process are discussed in connection with the experimental observations.     

Characterization of highly sulfated cyclodextrins

A class of highly sulfated cyclodextrins (HS-CDs) was developed for enantiomeric separation of chiral compounds by capillary electrophoresis (CE). The HS-CDs were produced by a facile single-step direct sulfation of cyclodextrin using sulfur trioxide-trimethylamine complex in dimethylformamide. Characterization of the HS-CDs by electrospray ionization mass spectrometry and by CE using a well-established indirect detection method indicated the species have very narrow heterogeneity in terms of degree of sulfation. Elemental analysis of the HS-alpha-, beta- and gamma-CDs showed that the average sulfate contents were 11, 12, and 13 per CD molecule, respectively. The 13C NMR of HS-CDs is consistent with the structural assignment of nearly complete sulfation at C-6 primary hydroxyl groups and partial sulfation at the C-2 secondary hydroxyls (>70%), while the C-3 hydroxyls remain unsubstituted. Enantiomeric separation by CE using the HS-CDs as chiral selectors showed that HS-alpha-, beta- and gamma-CDs complement each other by exhibiting different chiral selectivities, resulting in resolution of many chiral neutral, acidic and basic compounds of greatly varying structural features. The part of HS-CD that interacts with the guest molecule during complexation and, therefore, the receiving end of the cyclodextrin hydrophobic bucket was surrounded with largely regiospecifically substituted C-2 sulfates and intact C-3 hydroxyls, both at the equatorial positions. Such global regiospecific structural arrangement in HS-CDs provides differential diasteroisomeric complexation is proposed to be the principal contributing factor in the resolving racemates.     

Effect of some factors on the energy band structure of proteins

The effects of four factors (different side chains, side-chain disorder, conformational change, and ions and water) on the energy band structures of proteins have been investigated with the aid of the CNDO/2 crystal orbital method. The results indicate that these factors are very important. The consequences of these effects on the semiconductive properties of proteins are discussed.     

The HPLC Enantioresolution of Phenyl Isothiocyanated Amino Acids on Vancomycin Bonded Phase Using the Acetonitrile‐Based Mobile Phase: A Comparison to the Teicoplanin Phase

The phenyl isothiocyanate, an electrophilic reagent for peptide chain sequencing, is used to pre‐column derivatize a variety of α‐amino acids in alkaline medium before their enantioresolution on a vancomycin bonded chiral phase using the acetonitrile‐based mobile phase. The observed resolution is believed to be due to the re‐location of the hydrogen receptor site from sulfur to nitrogen on the isothiocyanyl fragment of derivatizing reagent, which in turn changes the enantioselectivity. Under the same chromatographic conditions, the resolution for N‐benzoylated, 3,5‐dinitrobenzoylated and N‐carbobenzyloxylated amino acids is either not found or unsatisfactory. Also, no resolution is obtained in the reversed‐ or normal phase mode for all phenyl isothiocyanated amino acids examined in this study.     

π -Type and σ -type cation- π complexes of atomic cations

MP2/6-31+G* calculations were performed on the cation- complexes of ethylene, cyclobutadiene and benzene with a number of atomic cations. It was found that except B⁺ all the atomic cations form -type cation- complexes with ethylene. On the other hand, with cyclobutadiene Li⁺, N⁺, Na⁺, P⁺ and K⁺ form -type complexes, whereas H⁺, F⁺, and Cl⁺ form covalent -type complexes. With benzene Li⁺, B⁺, Na⁺, Al⁺, and K⁺ form -type complexes whereas H⁺, F⁺, and Cl⁺ form -type complexes. It was concluded that the driving force to form the -type complex is chemical bonding, and that for metal cations to form -type complexes is non-covalent interaction.     

An in vitro Study on Transition from NO-Hemoglobin to Methemoglobin： Oxygen Effect

The nitrosyl-hemoglobin (HbNO) is the carrier of nitric oxide (NO) which is the important messenger molecule displaying multiple physiologic and pathophysiologic roles. However it is still not clear for the fate of HbNO molecules during the venous-arterial transit. In this letter, the HbNO transition in vitro was studied by using the electron paramagnetic resonance (EPR) spectra. It was found that HbNO molecules were stable when oxygen did not exist in the system but not stable in aerobic conditions. The absorption spectra further revealed that the methemoglobin (metHb) was the product of HbNO in aerobic environment, showing that the HbNO changed to metHb when there were enough oxygen molecules in the system.