Reactions of 1,2-dimethoxytetramethyldisilane with styrenes: Formation of a new type of silacyclopentanes having phenyl substituents on ring carbons

The reaction of 1,2-dimethoxytetramethyldisilane with styrene and α-methylstyrene in the presence of NaOMe catalyst in tetrahydrofuran (THF) gave the new silacyclopentanes 1,1-dimethyl-2,4-diphenyl-1-silacyclopentane (IIIa) and 1,1,2,4-tetramethyl-2,4-diphenyl-1-silacyclopentane (IIIb), respectively. These silacyclopentanes were found to exist as cis-trans mixtures. The use of sodium metal in place of NaOMe afforded similar results. Reactions of a polysilane mixture, MeO-(SiMe₂)_nOMe (n ≧ 3), with the styrenes also gave similar results. In some cases, polysilacycloalkanes such as 1,2,3-trisilacyclopentanes (IV) and 1,2,3,4-tetrasilacyclohexanes (V) were obtained as by-products. A mechanism for the formation of the silacyclopentanes and polysilacycloalkanes is presented. It was found that electron impact decomposition of silacyclopentanes IIIa and IIIb, trisilacycloalkane IV and tetrasilacycloalkane V gave molecular ions corresponding to the silacyclopropane, cyclotrisilane and cyclotetrasilane systems.     

Facile solid-phase synthesis of sulfated tyrosine-containing peptides: total synthesis of human big gastrin-II and cholecystokinin (CCK)-39.

Chemical synthesis of tyrosine O-sulfated peptides is still a laborious task for peptide chemists because of the intrinsic acid-lability of the sulfate moiety. An efficient cleavage/deprotection procedure without loss of the sulfate is the critical difficulty remaining to be solved for fluoren-9-ylmethoxycarbonyl (Fmoc)-based solid-phase synthesis of sulfated peptides. To overcome the difficulty, TFA-mediated solvolysis rates of a tyrosine O-sulfate [Tyr(SO3H)] residue and two protecting groups, tBu for the hydroxyl group of Ser and 2,2,4,6,7-pentamethyldihydrobenzofuran-5-sulfonyl (Pbf) for the guanidino group of Arg, were examined in detail. The desulfation obeyed first-order kinetics with a large entropy (59.6 J.K-1.mol-1) and enthalpy (110.5 kJ.mol-1) of activation. These values substantiated that the desulfation rate of the rigidly solvated Tyr(SO3H) residue was strongly temperature-dependent. By contrast, the SN1-type deprotections were less temperature-dependent and proceeded smoothly in TFA of a high ionizing power. Based on the large rate difference between the desulfation and the SN1-type deprotections in cold TFA, an efficient deprotection protocol for the sulfated peptides was developed. Our synthetic strategy for Tyr(SO3H)-containing peptides with this effective deprotection protocol is as follows: (i) a sulfated peptide chain is directly constructed on 2-chlorotrityl resin with Fmoc-based solid-phase chemistry using Fmoc-Tyr(SO3Na)-OH as a building block; (ii) the protected peptide-resin is treated with 90% aqueous TFA at 0 degree C for an appropriate period of time for the cleavage and deprotection. Human cholecystokinin (CCK)-12, mini gastrin-II (14 residues), and little gastrin-II (17 residues) were synthesized with this method in 26-38% yields without any difficulties. This method was further applied to the stepwise synthesis of human big gastrin-II (34 residues), CCK-33 and -39. Despite the prolonged acid treatment (15-18 h at 0 degree C), the ratios of the desulfated peptides were less than 15%, and the pure sulfated peptides were obtained in around 10% yields.     

Synthesis and photophysical properties of azuleno[1′,2′:4,5]pyrrolo[2,1-b]quinazoline-6,14-diones: Azulene analogs of tryptanthrin

Azulene analog of tryptanthrin, azuleno[1′,2′:4,5]pyrrolo[2,1-b]quinazoline-6,14-dione, was successfully prepared by the condensation reaction of azuleno[2,1-b]pyrrole-2,3-dione with isatoic anhydride in the presence of sodium hydride or diisopropylethylamine (DIPEA). Its 2-halo derivatives were also obtained in high yields by the condensation reaction with 5-haloisatoic anhydrides in the presence of DIPEA. Reactivity toward electrophilic reagents was revealed by halogenation with N-bromosuccinimide (NBS) or N-iodosuccinimide (NIS) to afford 12-halo derivatives in high yields. Among the halo derivatives, 2-iodo and 12-iodo derivatives were reactive enough to afford phenylethynyl derivatives under Pd-catalyzed Sonogashira cross-coupling conditions. Within the phenylethynyl derivatives, only 12-phenylethynyl derivative was transformed into its 1,1,4,4-tetracyanobutadiene (TCBD) derivative by the reaction with TCNE. Amphoteric redox properties of the novel azulene analogs of tryptanthrin were characterized by spectroscopic and voltammetric analyses.     

Determination of residual solvents in pharmaceuticals by thermal desorption-GC/MS.

A novel method for the determination of residual solvents in pharmaceuticals by thermal desorption (TD)-GC/MS has been established. A programmed temperature pyrolyzer (double shot pyrolyzer) is applied for the TD. This method does not require any sample pretreatment and allows very small amounts of the sample. Directly desorbed solvents from intact pharmaceuticals (ca. 1 mg) in the desorption cup (5 mm x 3.8 mm i.d.) were cryofocused at the head of a capillary column prior to a GC/MS analysis. The desorption temperature was set at a point about 20 degrees C higher than the melting point of each sample individually, and held for 3 min. The analytical results using 7 different pharmaceuticals were in agreement with those obtained by direct injection (DI) of the solution, followed by USP XXIII. This proposed TD-GC/MS method was demonstrated to be very useful for the identification and quantification of residual solvents. Furthermore, this method was simple, allowed rapid analysis and gave good repeatability.     

Chemical trend of Ln-M exchange couplings in heterometallic complexes with Ln = Gd, Tb, Dy, Ho, Er and M = Cu, V

The 4f-3d exchange couplings were definitively and precisely determined in the dinuclear complexes (Ln-M) involving double μ-oxo-bridges, by means of combined high-frequency electron paramagnetic resonance and pulsed-field magnetization techniques, revealing a monotonic decrease of ferromagnetic J(Ln-Cu) in the order of the atomic number, (64)Gd to (68)Er.     

Morphology and physical properties of a novel Ramie‐PU blended nonwoven by electrospinning: The effect of cosolvent ratio

A novel macro/nano blended nonwoven with excellent physical properties was prepared by electrospinning polyurethane (PU) nanofibers onto the surface of ramie webs under different weight ratios of N,N‐dimethylacetamide (DMAc)/acetone cosolvents. The ratio of cosolvents has a significant influence on the morphology, tensile properties, resilience, and thermal properties of the resultant samples. Bead‐free and fine interconnected nanofibers were obtained with an increase of acetone content up to 60 wt%. The total physical properties of the blended nonwovens were optimal for a DMAc/acetone ratio of 40/60, in which the tensile load at break, extension at break and Young's modulus were 441, 54, and 256% higher than that of pure ramie web, respectively. The resilience of the blended nonwovens was ～20% higher than that of nonblended ramie web. The significant improvement of physical properties may be due to the good connection between PU nanofiber membranes and ramie webs and the molecular chain structure differences, interconnected structural differences, and high extensibility of PU nanofibers, according to the results of crystallization by differential scanning calorimetry (DSC) and morphological observation by scanning electronic microscopy (SEM). © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1–14, 2010     

Mobility performance of a rigid wheel in low gravity environments

To investigate influences of gravity on mobility of wheeled rovers for future lunar/planetary exploration missions, model experiments of a soil-wheel system were performed on an aircraft during variable gravity maneuvers. The experimental set-up consists of a single rigid wheel and a soil bed with two kinds of dry sands: lunar soil simulant and Toyoura sand. The experimental results revealed that a lower gravity environment yields higher wheel slippage in variable gravity conditions. In addition to the partial gravity experiments, the same experiments with variable wheel load levels were also performed on ground (1 g conditions). The on-ground experiments produced opposite results to those obtained in the partial gravity experiments, where a lower wheel load yields lower slippage in a constant gravity environment. In low gravity environments, fluidity (flowability) of soil increases due to the confining stress reduction in the soil, while the effect of the wheel load on sinkage decreases. As a result, both of these effects are canceled out, and gravity seemingly has no effect on the wheel sinkage. In the meantime, in addition to the effect of wheel load reduction, the increase of the soil flowability lessens the shear resistance to the wheel rotation, as a result of which the wheel is unable to hold sufficient traction in low gravity environments. This suggests that the mobility of the wheel is governed concurrently by two mechanisms: the bearing characteristics to the wheel load, and the shearing characteristics to the wheel rotation. It appears that, in low gravity, the wheel mobility deteriorates due to the relative decrease in the driving force while the wheel sinkage remains constant. Thus, it can be concluded that the lunar and/or Mars’ gravity environments will be unfavorable in terms of the mobility performance of wheels as compared to the earth’s gravity condition.     

Defect Engineering and Anisotropic Modulation of Ionic Transport in Perovskite Solid Electrolyte LixLa(1−x)/3NbO3

Solid electrolytes, such as perovskite Li_3xLa_2/1−xTiO₃, Li_xLa_(1−x)/3NbO₃ and garnet Li₇La₃Zr₂O₁₂ ceramic oxides, have attracted extensive attention in lithium-ion battery research due to their good chemical stability and the improvability of their ionic conductivity with great potential in solid electrolyte battery applications. These solid oxides eliminate safety issues and cycling instability, which are common challenges in the current commercial lithium-ion batteries based on organic liquid electrolytes. However, in practical applications, structural disorders such as point defects and grain boundaries play a dominating role in the ionic transport of these solid electrolytes, where defect engineering to tailor or improve the ionic conductive property is still seldom reported. Here, we demonstrate a defect engineering approach to alter the ionic conductive channels in Li_xLa_(1−x)/3NbO₃ (x = 0.1~0.13) electrolytes based on the rearrangements of La sites through a quenching process. The changes in the occupancy and interstitial defects of La ions lead to anisotropic modulation of ionic conductivity with the increase in quenching temperatures. Our trial in this work on the defect engineering of quenched electrolytes will offer opportunities to optimize ionic conductivity and benefit the solid electrolyte battery applications.     

Complexation of acyclic ligands having two terminal quinoline units with alkali metal cations

Abstract

Acyclic multidentate ligands consisting of an oligooxyethylene chain (di-, tri-, tetra-, and penta-) and two terminal rigid quinaldate end groups were newly prepared and their complexation properties with alkali metal cations were estimated by the solvent extraction method to indicate a better affinity for K⁺. Among them, the tetraethylene glycol derivative showed the highest K⁺ binding on about the same level as 18-crown-6. Their conformations in solution and in the solid state were examined by using ¹H- and ¹³C-NMR spectroscopy and X-ray crystal analyses, respectively. The better binding of K⁺ in comparison with the corresponding glymes or analogues having the same donor sites was reasonably explained by considering the effective co-ordination of the carbonyl oxygen of the ester groups and the parallel π-stacking interaction between two quinaldate surfaces.     

Evolution and characterization of fluorite-like nano-SrBi2Nb2O9 phase in the SrO-Bi2O3-Nb2O5-Li2B4O7 glass system

Transparent glasses of various compositions in the system (100−x)Li₂B₄O₇−x(SrO-Bi₂O₃-Nb₂O₅) (where x=10, 20, 30, 40, 50 and 60, in molar ratio) were fabricated via splat quenching technique. The glassy nature of the as-quenched samples was established by differential thermal analyses. X-ray powder diffraction (XRD) and transmission electron microscopic studies confirmed the amorphous nature of the as-quenched and crystallinity in the heat-treated samples. Fluorite phase formation prior to the perovskite SrBi₂Nb₂O₉ phase was analyzed by both the XRD and high-resolution transmission electron microscopy. Dielectric and the optical properties (transmission, optical band gap and Urbach energy) of these samples have been found to be compositional dependent. Refractive index was measured and compared with the values predicted by Wemple-Didomemenico and Gladstone-Dale relations. The glass nanocomposites comprising nanometer-sized crystallites of fluorite phase were found to be nonlinear optic active.