Construction of a novel ZnCo2O4/Bi2O3 heterojunction photocatalyst with enhanced visible light photocatalytic activity

A novel ZnCo₂O₄/Bi₂O₃ heterojunction photocatalyst was prepared via balling method. The enhanced photocatalytic activity is mainly attributed to the broad photoabsorption and low recombination rate of photogenerated electron-hole pairs, which is driven by the photogenerated potential difference formed at the ZnCo₂O₄/Bi₂O₃ heterojunction interface.     

Study on the reduction roasting of spent LiNixCoyMnzO2 lithium-ion battery cathode materials

Journal of Thermal Analysis and Calorimetry - Simple and environment-friendly recovery of valuable metals from spent LIBs was explored. The experimental method, which included reduction roasting...     

CVD法不同条件下制备的多壁碳纳米管的Fenton氧化改性

碳纳米管经焙烧和稀硝酸纯化处理后,在相同的实验条件下,采用Fenton试剂产生的·OH分别对CVD法合成的两种制备条件不同的多壁碳纳米管进行氧化改性处理。红外光谱(FT IR)表明,改性后的两种碳管结构中都引入了羟基、羰基和羧基等含氧官能团。此外,由于制备条件不同,导致它们的石墨化程度、缺陷含量和抗氧化能力等性质也不同,因此CVD法制备条件能够对碳管Fenton氧化改性结果产生重要影响。机理分析表明,这些含氧官能团可以看作是具有强亲电性和强氧化性的·OH对碳管上缺陷位置和不饱和键进行攻击的结果。     

Amperometric hydrogen peroxide biosensor based on a glassy carbon electrode modified with polythionine and gold nanoparticles

We report on a novel hydrogen peroxide biosensor that was fabricated by the layer-by-layer deposition method. Thionine was first deposited on a glassy carbon electrode by two-step electropolymerization to form a positively charged surface. The negatively charged gold nanoparticles and positively charged horseradish peroxidase were then immobilized onto the electrode via electrostatic adsorption. The sequential deposition process was characterized using electrochemical impedance spectroscopy by monitoring the impedance change of the electrode surface during the construction process. The electrochemical behaviour of the modified electrode and its response to hydrogen peroxide were studied by cyclic voltammetry. The effects of the experimental variables on the amperometric determination of H₂O₂ such as solution pH and applied potential were investigated for optimum analytical performance. Under the optimized conditions, the biosensor exhibited linear response to H₂O₂ in the concentration ranges from 0.20 to 1.6?mM and 1.6 to 4.0?mM, with a detection limit of 0.067?mM (at an S/N of 3). In addition, the stability and reproducibility of this biosensor was also evaluated and gave satisfactory results.

有机锗氨基酸酯类系列化合物的快原子轰击质谱规律

为增强有机锗化合物的生物活性，合成了一系列有机锗氨基酸酯类倍半氧化物，并重点研究了它们的快原子轰击质谱（ＦＡＢＭＳ）。研究结果表明：该系列化合物的各碎片离子峰与其组成及结构均有很好的对应关系及很强的规律性     

Determination of sphingosine kinase activity in biological samples by liquid chromatography–tandem mass spectrometry

Sphingosine kinase (SphK) is a key enzyme in modulating the levels of sphingosine 1‐phosphate (S1P) as well as an important enzyme in numerous biological responses. Using C17‐sphingosine as a substrate, we established a rapid, sensitive and highly efficient method for determination of SphK activity by analyzing the product C17‐sphingosine 1‐phosphate (C17‐S1P) using liquid chromatography–tandem mass spectrometry. The standard curve for C17‐S1P was linear over a wide range (10–1000 ng/mL) with correlation coefficient (r²) greater than 0.999. The lower limit of quantification for C17‐S1P was 10 ng/mL. The K_m values for C17‐sphingosine and ATP were determined to be 28.17 and 188.5 mM, respectively. More importantly, the SphK activity dramatically increased in cultured HEK 293 cells expressing wild‐type SphK1 as well as cells treated with tumor necrosis factor‐a, a sphingosine kinase activator. In contrast, the SphK activity decreased in cultured HEK 293 cells treated with dimethylsphngosine, a sphingosine kinase inhibitor. In conclusion, this method was sensitive and rapid in the determination of SphK acitivity, providing striking utilities in exploring the sphingosine kinase signaling pathway and screening active compounds targeting SphK activity. Copyright © 2010 John Wiley & Sons, Ltd.     

Effect of aluminum modification on catalytic properties of PtSn-based catalysts supported on SBA-15 for propane dehydrogenation

The catalytic properties of PtSn-based catalysts supported on siliceous SBA-15 and Al-modified SBA-15, such as Al-incorporated SBA-15 (AlSBA-15) and alumina-modified SBA-15 (Al2O3/SBA-15), for propane dehydrogenation were investigated. Al2O3/SBA-15 was prepared either by an impregnation method using aluminum nitrate aqueous solution, or by the treatment of SBA-15 with a Al(OC3H7)3 solution in anhydrous toluene. N2-physisorption, FT-IR spectroscopy, solid-state 27Al MAS NMR spectroscopy, hydrogen chemisorption, XRF, NH3 temperature-programmed desorption, X-ray photoelectron spectroscopy and TPO were used to characterize these samples. Among these catalysts, the PtSn-based catalyst supported on Al2O3/SBA-15, which was grafted with Al(OC3H7)3, exhibited the best catalytic performance in terms of activity and stability The possible reason was due to the high Pt metal dispersion and/or the strong interactions among Pt, Sn, and the support.     

荧光可调控的碳量子点的电化学制备及性质研究

采用循环伏安法（Cyclic Voltammetry,CV）在碱性条件下电解石墨棒,得到水溶性的荧光碳量子点. 通过透射电子显微镜（TEM）、拉曼光谱（Raman spectrum）、原子力显微镜（AFM）对所制备的碳量子点进行形貌及结构表征,发现该碳量子点由1～4层石墨烯片层堆积形成,粒径在19 nm左右,厚度在1 nm左右. 通过荧光光谱（PL）、紫外可见吸收光谱（UV-vis）、傅里叶变换红外光谱（FTIR）、X射线光电子能谱（XPS）对所制备的碳量子点进行性质测定,发现该碳量子点在400和525 nm处有两个荧光发射峰,且通过控制扫描周数可以调节两个发射峰的相对强度,从而调控碳量子点的荧光颜色：随着扫描周数的增加,400 nm处发射峰的相对强度逐渐减小,而525 nm处发射峰的相对强度逐渐增大,两个荧光发射峰分别与碳量子点的π-π共轭体系和含氧官能团的n-π共轭体系有关.     

生物基超韧聚乳酸复合材料的制备与性能

采用来源于可再生资源的聚醚酰胺弹性体（PEBA）增韧聚乳酸（PLA）制备超韧聚乳酸（PLA/PEBA-GMA）复合材料.为了提高PEBA与PLA之间的相容性,选择极性单体甲基丙烯酸缩水甘油酯（GMA）、共接枝单体乙烯基吡咯烷酮（NVP）及引发剂过氧化二异丙苯（DCP）对PEBA进行接枝改性制备PEBA-GMA.研究了接枝单体组分的用量（m/g）对PLA/PEBA-GMA复合材料性能的影响.研究发现,随着接枝单体组分用量的提高,复合材料的缺口冲击强度逐渐增大,当接枝单体组分GMA,NVP和DCP的用量分别为2.5,2.5和0.25 g时,复合材料的冲击强度高达88.6 kJ/m²,断裂伸长率为164.1%.研究表明,在熔融共混过程中,聚乳酸的端基（—OH和—COOH）与PEBA-GMA上环氧基团发生反应,有效改善两相间的界面相容性,随着接枝单体组分比例的提高,分散相PEBA-GMA的粒子尺寸逐渐减小且分布均匀.     

纳米ZnO/聚醋酸乙烯酯复合薄膜的光催化性能研究

采用溶胶-凝胶和浸渍-提拉而后煅烧的方法得到了在可见光作用下具有光催化性能的纳米ZnO/聚醋酸乙烯酯(PVAc)复合薄膜.通过正交设计实验,研究了PVAc的浓度、煅烧温度、煅烧时间、复合薄膜层数和附加ZnO膜层数等工艺因素对光催化性能的影响,并通过SEM,XRD和FT-IR对其进行了分析与表征.在室内普通照明用白炽灯作用下,以甲基橙溶液为催化对象,PVAc含量10%的、在250℃煅烧30min所得到的纳米ZnO/PVAe复合薄膜的光催化性能的实验结果表明,复合薄膜对甲基橙降解率达60%,而使用250℃煅烧30min所得到的纳米ZnO 4层薄膜或PVAc 4层薄膜催化的甲基橙溶液的浓度变化很小.