Effect of Thermal Processing on the Metabolic Components of Black Beans on Ultra-High-Performance Liquid Chromatography Coupled with High-Field Quadrupole-Orbitrap High-Resolution Mass Spectrometry

An ultra-high-performance liquid chromatography coupled with high-field quadrupole-orbitrap mass spectrometry (UHPLC-QE-MS) histological platform was used to analyze the effects of two thermal processing methods (cooking and steaming) on the nutritional metabolic components of black beans. Black beans had the most amino acids, followed by lipids and polyphenols, and more sugars. Multivariate statistical analysis indicated that heat processing significantly affected the metabolic component content in black beans, with effects varying among different components. Polyphenols, especially flavonoids and isoflavones, were highly susceptible. A total of 197 and 210 differential metabolites were identified in both raw black beans and cooked and steamed black beans, respectively. Cooking reduced the cumulative content of amino acids, lipids, polyphenols, sugars, and nucleosides, whereas steaming reduced amino acid and lipid content, slightly increased polyphenol content, and significantly increased sugar and nucleoside content. Our results indicated that metabolic components were better retained during steaming than cooking. Heat treatment had the greatest impact on amino acids, followed by polyphenols, fatty acids, sugars, and vitamins, indicating that cooking promotes the transformation of most substances and the synthesis of a few. The results of this study provide a basis for further research and development of nutritional products using black beans.     

Numerical Study on Entropy Generation of the Multi-Stage Centrifugal Pump

The energy loss of the multi-stage centrifugal pump was investigated by numerical analysis using the entropy generation method with the RNG k-ε turbulence model. Entropy generation due to time-averaged motion and velocity fluctuation was mainly considered. It was found that the entropy generation of guide vanes and impellers account for 71.2% and 23.3% of the total entropy generation under the designed flow condition. The guide vanes are the main hydraulic loss domains and their entropy generation is about 9 W/K, followed by impellers. There are vortices at the tongue of the guide vane inlet as well as flow separations in the impellers, which lead to entropy generation. The fluid impacts the outer surface of the guide vanes, resulting in the increase in entropy generation. There are refluxes near the guide vane tongues which also increase the entropy generation of this part. The entropy generation distribution of the guide vanes and impellers was investigated, which found that the positive guide vane has more entropy generation compared with the reverse guide. The entropy generation of the blade suction surface is higher compared with the pressure surface. This study indicated that the entropy generation method has distinct advantages in the assessment of hydraulic loss.     

Cloning,Expression, Purification,and Characterization of β-Galactosidase from Bifidobacterium longum and Bifidobacterium pseudocatenulatum

Expression and purification of β-galactosidases derived from Bifidobacterium provide a new resource for efficient lactose hydrolysis and lactose intolerance alleviation. Here, we cloned and expressed two β-galactosidases derived from Bifidobacterium. The optimal pH for BLGLB1 was 5.5, and the optimal temperature was 45 °C, at which the enzyme activity of BLGLB1 was higher than that of commercial enzyme E (300 ± 3.6 U/mg) under its optimal conditions, reaching 2200 ± 15 U/mg. The optimal pH and temperature for BPGLB1 were 6.0 and 45 °C, respectively, and the enzyme activity (0.58 ± 0.03 U/mg) under optimum conditions was significantly lower than that of BLGLB1. The structures of the two β-galactosidase were similar, with all known key sites conserved. When o-nitrophenyl-β-D-galactoside (oNPG) was used as an enzyme reaction substrate, the maximum reaction velocity (V_max) for BLGLB1 and BPGLB1 was 3700 ± 100 U/mg and 1.1 ± 0.1 U/mg, respectively. The kinetic constant (K_m) of BLGLB1 and BPGLB1 was 1.9 ± 0.1 and 1.3 ± 0.3 mmol/L, respectively. The respective catalytic constant (k_cat) of BLGLB1 and BPGLB1 was 1700 ± 40 s⁻¹ and 0.5 ± 0.02 s⁻¹, respectively; the respective k_cat/K_m value of BLGLB1 and BPGLB1 was 870 L/(mmol∙s) and 0.36 L/(mmol∙s), respectively. The K_m, k_cat and V_max values of BLGLB1 were superior to those of earlier reported β-galactosidase derived from Bifidobacterium. Overall, BLGLB1 has potential application in the food industry.     

Computational fluid dynamic-discrete element method coupling analysis of particle transport in branched networks

An understanding of the particle transport characteristics in a branched network helps to predict the particle distribution and prevent undesired plugging in various engineering systems.Quantitative analysis of particle flow characteristics is challenging in that experiments are expensive and particle flow is difficult to detect without disturbing the flow.To overcome this difficulty,man-made fractal tree-like branched networks were built,and a coupled computational fluid dynamic and discrete element method model was applied.A series of numerical simulations was carried out to analyze the influence of fractal structure parameters of networks on the particle flow characteristics.The joint influence of inertial,shunt capacity and superposition from upstream branches on particle flow was investigated.The injection position at the inlet determined the particle velocity and its future flow path.The particle density ratio,particle size and bifurcation angle had a greater influence on the shunting of K2 branches than that in the K1 level and N_k22/N_k21 reached a maximum at 60°.Compared with a network with an even number of branches,there was a preferential branch when the branch number was odd.The preferential branch effect or asymmetry degree of the level(K2)branches had a more significant impact on particle shunting than that from the upstream branches(K1).     

金红石TiO_2中本征缺陷扩散性质的第一性原理计算

基于密度泛函理论的爬坡弹性带方法,对金红石相二氧化钛晶体中钛间隙、钛空位、氧间隙、氧空位4种本征缺陷的扩散特征进行了研究.对比4种本征缺陷在晶格内部沿不同扩散路径的过渡态势垒后发现,缺陷扩散过程呈现出明显的各向异性.其中,钛间隙和氧间隙沿[001]方向具有最小的扩散势垒路径,激活能分别为0.505 eV和0.859 eV;氧空位和钛空位的势垒最小的扩散路径分别沿[110]方向和[111]方向,激活能分别为0.735 eV和2.375 eV.     

在任意温度的热库中量子位的消相干

本文在Markov 近似下推导了在任意温度的热库中,一个量子位(qubit)的主方程,并由此讨论了由于振幅阻尼而引起的量子位消相干(decoherence). 结论表明量子位的跃迁频率与热库的特征频率及截止频率的关系对消相干有明显的影响。     

Necklace solitons in Bessel photonic lattice: Stability and internal oscillation

Stability, internal modes and internal oscillation of 12-pearled necklace solitons in photorefractive crystal with imprinted Bessel photonic lattices are investigated. It is shown that the imaginary parts of internal modes are negligible comparing with real parts. The stable solitons perform long-distance and quasi-periodic oscillation of intensity and shape under the perturbation of internal modes.     

Rapid Detection of Five Estrogens Added Illegally to Dietary Supplements by Combining TLC with Raman Imaging Microscope

Estrogens added illegally to dietary supplements are hazardous to human health. Traditional detection and analysis methods have many limitations, and we have developed an assay that combines thin-layer chromatography with Raman imaging microscopy (TLC-RIM). The five estrogens (estrone, estradiol, estriol, ethinyl estradiol, and diethylstilbestrol) were initially separated by TLC, then detected by area scanning Raman imaging with a 532 nm laser under a microscope. Raman spectra were obtained for each estrogen, which were used for detecting estrogen illegally added to botanical dietary supplements. The LOD of each estrogen was 0.4, 1.0, 0.8, 0.2, and 0.2 mg/mL, respectively. The matrix in the real sample did not interfere with the detection of estrogens. The method was fast, sensitive, stable, specific, and reliable.     

The Potential Antidepressant Action of Duloxetine Co-Administered with the TAAR1 Receptor Agonist SEP-363856 in Mice

Here, we explored the possible interaction between duloxetine and SEP-363856 (SEP-856) in depression-related reactions. The results showed that oral administration of duloxetine showed powerful antidepressant-like effects in both the forced swimming test (FST) and the suspension tail test (TST). SEP-856 orally administered alone also exerted an antidepressant-like effect in FST and TST, especially at doses of 0.3, 1, and 10 mg/kg. In addition, duloxetine (15 mg/kg) and SEP-856 (15 mg/kg) both showed antidepressant-like effects in the sucrose preference test (SPT). Most importantly, in the above experiments, compared with duloxetine alone, the simultaneous use of duloxetine and SEP-856 caused a more significant antidepressant-like effect. It is worth noting that doses of drug combination in FST and TST did not change the motor activities of mice in the open-field test (OFT). Thus, duloxetine and SEP-856 seem to play a synergistic role in regulating depression-related behaviors and might be beneficial for refractory depression.     

A Simple Hydrothermal Method for the Growth of ZnO Crystals

ZnO microstructures have been grown from zinc chloride (ZnCl₂) and ammonia solution at 100 °C for 1 – 24 hours. X‐ray diffraction, scanning electron microscope and field‐emission scanning microscope were utilized to investigate the structural properties and morphology of the ZnO crystals. Structural investigations show that phase‐pure hexagonal structure ZnO has been successfully synthesized, and the hexagonal structure ZnO can be achieved in solutions with an appropriate range of concentrations. Under our experimental conditions, several different morphologies of ZnO structures were obtained, including flower‐like and bar flower‐like. The relationship between the morphology and experimental conditions are discussed.