H+和Ar11+激发Si的K壳层X射线发射研究

测量了50–250 keV H⁺和1.0–3.0 MeV Ar¹¹⁺ 轰击Si表面过程中辐射的X射线. 结果表明, 在Ar¹¹⁺入射的情况下, 引起了Si的L壳层上3, 4个电子的多电离.计算了Si的K壳层X射线产生截面, 并将两体碰撞近似(BEA), 平面波恩近似, ECPSSR理论计算与实验值进行了对比. ECPSSR理论与质子产生的截面数据能够很好地符合; 而考虑多电离后, BEA理论与Ar¹¹⁺的实验结果符合较好. 关键词： X射线 高电荷态重离子 多电离     

Zn1-xTMxO (TM=Al,Ga, In)导电性能的模拟计算

基于密度泛函理论框架下的第一性原理平面波超软赝势方法, 构建了未掺杂与相同掺杂浓度的Zn_1-xTM_xO (TM=Al, Ga, In) 超胞模型,分别对模型进行了几何结构优化、态密度分布和能带分布的计算. 结果表明, 分别高掺杂 (Al, Ga, In) 相同原子分数3.125 at%的条件下, In掺杂对ZnO导电性能最好的结果, 计算结果和实验结果相一致. 关键词： (Al,Ga,In) 高掺ZnO 导电性能 第一性原理     

Scholte波与含泥沙两相流介质属性关系的分析及仿真验证

基于四种超声悬浮液模型Urick, Urick-Ament, HT, Mcclements分析了Scholte波在两相流体与多孔介质固体界面处的传播特性. 结合各模型的复波数表达式建立含泥沙流体-多孔介质固体界面波特征方程, 分析了Scholte波速与两相流体积含量、粒径等介质属性的关系. 通过仿真实验获得界面波信号, 运用时延估计获得Scholte波速与泥沙含量、粒径的关系, 发现所得的波速与Urick-Ament和HT理论有相对好的一致性. 关键词： Scholte波 两相流体 多孔介质 泥沙含量     

水体重金属激光诱导击穿光谱定量分析方法对比研究

建立了适用于激光诱导击穿光谱探测的多元线性回归、神经网络回归和支持向量机回归三种定量反演算法模型, 以水体重金属Ni为例进行了回归实验测试和对比分析. 多元线性回归、神经网络回归和支持向量机回归的平均相对标准偏差分别为7.60%, 4.86%, 2.35%; 最大相对标准偏差分别为23.35%, 15.20%, 8.29%; 平均相对误差分别为25.98%, 10.58%, 2.72%, 最大相对误差分别为116.47%, 47.38%, 9.89%. 研究为进一步实现水中痕量金属元素的快速定量分析提供了方法和数据参考. 关键词： 光谱学 激光诱导击穿光谱 支持向量机回归 重金属     

Goos–Hänchen shifts of a light beam reflected from the interface of colloidal ferrofluids

Controllable Goos–Hänchen shift of a light beam reflected from the colloidal ferrofluids is investigated by using the stationary-phase method. It is found that the Goos–Hänchen shift can be easily controlled by the local H_e factor and the volume factor. Using this scheme, the peak value, the peak position and the width of the Goos–Hänchen shift can all be controlled by adjusting the external magnetic field for a fixed configuration, which also provides a possibility for obtaining larger negative Goos–Hänchen shift by changing the external controlling field. Our results have potential applications in optical devices.     

模糊优选（优化）理论与模型

本文提出的多目标系统模糊优选(优化)理论与计算模型,是处理多目标系统的一个新的优化方法。     

Edge misfit dislocation formation at the interface of a nanopore and infinite substrate with surface/interface effects

The model of an edge misfit dislocation at the interface of the hollow nanopore and the infinite substrate with surface/interface stress is investigated. Using the complex variable method, analytical solutions for complex potentials of a film due to an edge misfit dislocation located in the film with surface/interface effect are derived, and the stress fields of the film and the edge misfit dislocation formation energy can be obtained. The critical conditions for edge misfit dislocation formation are given at which the generation of an edge misfit dislocation is energetically favourable. The influence of the ratio of the shear modulus between the film and the infinite substrate, the misfit strain, the radius of the nanopore and the surface/interface stress on the critical thickness of the film is discussed.     

分析结构非线性问题的杂交可变基Galerkin方法

基于渐近摄动理论和Galer-kin方法,本文提出分析结构非线性问题的杂交可变基Galer-kin方法。本文方法首次引入可变基函数的概念,可大幅度降低计算量,而且在有限元法等数值方法中易于推广应用,在解决非线性问题领域有广泛应用前景。最后本文分析圆板大挠度问题和扁球壳大挠度问题,以验证本文方法的有效性。     

Effect of optimized aging processing on properties of the sintered Dy-doped Nd–Fe–B permanent magnet

We investigate the effect of the optimized aging processing on magnetism and mechanical property of the sintered Dydoped Nd–Fe–B permanent magnet. The experimental results show that the magnetism, especially intrinsic coercivity, of the optimized aged Dy-doped Nd–Fe–B magnet is more excellent than that of the sintered one, but the former's strength and hardness are lower than that of the latter. It was observed that the optimized aged Dy-doped Nd–Fe–B magnet have more uniform grain size, thinner(Nd, Dy)-rich boundary phase. By means of the EBSD technology, the number of larger angle grain boundaries in the optimized aged Dy-doped Nd–Fe–B magnet is more than that of the sintered one. The reasons for the increased intrinsic coercivity and decreased mechanical properties of the optimized aged Dy-doped Nd–Fe–B magnet are also discussed.     

大学物理实验教学改革的实践与思索

本主要介绍了我校近年来在大学物理实验课程体系和教学内容改革的实践及下一步改革的思路。