Diastereoselective Alkylation of (Diene-Aldehyde)Fe(CO)3 Complexes with Functionalized Zinc-Copper Reagents NuCu(CN)Znl

Addition of functionalized zinc-copper reagents to the title complexes proceeds in a highly diastereoselective fashion to afford dienol complexes. The relative configurations of adducts 3d were determined by single X-ray diffraction analysis.     

Total Syntheses of Two Self-polymerizable Carbocyclic Analogues of 2′-deoxyribonucleosides

A short regio- and stereoselective synthesis of two carbocyclic 3′-deoxynucleoside analogues is described, the key step of which consists in the photosensitized addition of MeOH to a cyclopent-2-enone derivative. As in both cases functional groups capable to react with each other are present in the same molecule, the synthetic compounds can form polymers similar to oligonucleotides.     

二氧化钒薄膜的低温制备及其性能研究

针对VO₂薄膜在微测辐射热计上的应用，采用射频反应溅射法，在室温下制备氧化钒薄膜；研究了氧分压对薄膜沉积速率、电学性质及成分的影响.通过调节氧分压，先获得成分接近VO₂的非晶化薄膜，再在400℃空气中氧化退火，便可制得高电阻温度系数，低电阻率的VO₂薄膜，电阻温度系数约为-4%/℃，薄膜方块电阻为R_□为100—300kΩ；薄膜在室温下沉积，400℃下退火的制备方法与微机电加工(micro electromechanic 关键词： 二氧化钒 电阻温度系数 氧分压 射频反应溅射法     

识别过渡金属离子的1,8-萘二甲酰亚胺多胺衍生物荧光传感器的研究

设计合成了用以检测过渡金属离子的荧光化学敏感器体系,它们是由1,8-萘二酰亚胺为荧光团,多胺衍生物为金属离子受体组成．在室温下对其光物理性质的研究中发现,在没有加入过渡金属离子时,由于体系内存在有效的光诱导电子转移过程使得荧光团的荧光被淬灭．加入过渡金属离子后,金属离子受体中的氮原子和过渡金属离子之间的配位作用阻断了光诱导电子转移过程,体系的荧光增强．不同的金属离子受体表现出了和过渡金属离子不同的配位识别能力,并且通过荧光的变化传递出受体-金属离子作用的信息．     

Benzotriazole is thermally more stable than 1,2,3-triazole

TGA, DTA and DSC analyses indicate that benzotriazole is significantly more stable thermally than 1,2,3-triazole.     

Optimization of the surface texture for silicon carbide sliding in water

Surface texturing has been recognized as an effective means to improve the tribological performances of sliding surfaces. Usually, generation additional hydrodynamic pressure to increase the load carrying capacity is regarded as the most significant effect of surface texture. In the case of silicon carbide sliding against identical material in water, the experimental results indicate that surface texture is also helpful to improve the running-in progress to smooth the contact surfaces, showing another reason to result in low friction. Based on the consideration of enhancing the generation of hydrodynamic pressure and improving running-in progress, a surface texture pattern, which was combined with large (circle, 350 μm in diameter) and small (rectangular, 40 μm in length) dimples, was designed to maximize the texture effect on the load carrying capacity of SiC surfaces sliding in water. The friction coefficient of such textured surface was evaluated and compared with that of untextured and those only with large or small dimples only. The friction reduction mechanisms of the patterns with different dimples in size are discussed.     

一类多维指数分布的参数估计

考虑生存函数为(F)(x1,x2,…,xn)=P{X1＞x1,…,Xn＞xn}=exp{-[n∑i=1(xi/θi)1/δ]δ}(0＜xi＜∞,0＜δ≤ 1,0＜θi＜∞,i=(1,n))的一类多维指数分布,给出了它的密度函数的表示式,并讨论了它的性质.提出了相关参数δ的估计(^δ),证明了(^δ)有相合性和渐近正态性,得到了(^δ)的渐近方差σ2δ.最后还给出了若干随机模拟的结果.     

Study of asymmetric charge writing on Pb(Zr,Ti)O3 thin films by Kelvin probe force microscopy

Polycrystalline Pb(Zr_0.55Ti_0.45)O₃ thin film was deposited on Pt/Ti/SiO₂/Si(1 0 0) by radio-frequency-magnetron sputtering method, and the writing of charge bits on the surface of PZT thin film was studied by Kelvin probe force microscopy. It is found that the surface potential of the negative charge bits are higher than those of the corresponding positive ones. When ferroelectric polarization switching occurs, the potential difference becomes even more remarkable. A qualitative model was proposed to explain the origin of the asymmetric charge writing. It is demonstrated that the internal field in the interface layer, which is near the ferroelectric/electrode interface in ferroelectric film, is likely to be the cause for the occurrence of this phenomenon.     

k-树的补图的最小填充和树宽

一个图的最小填充问题是寻求边数最少的弦母图,一个图的树宽问题是寻求团数最小的弦母图,这两个问题分别在稀疏矩阵计算及图的算法设计中有非常重要的作用．一个k-树G的补图G称为k-补树．本文给出了k-补树G的最小填充数f(G) 及树宽TW(G)．     

木质素在塑料中的应用

总结了国内外近10年来木质素在塑料中的应用进展，重点对木质素在PVC、PP、PE、PF、PU等5个方面的研究成果进行了系统阐述，并对该技术的发展方向进行了分析预测。