声光栅正弦结构光投射器的光学系统设计

针对一种新型的声光波干涉测量技术,对声光栅正弦结构光投射器的三维测量工作原理进行了系统的分析,讨论了影响投射器光学系统结构的因素和影响接收屏上的光照度的因素,并进行了光学系统设计。在优化设计过程中,采用了限制光线最大入射角的方法,达到控制投射系统的球差和保证接收屏上照明均匀的要求。所设计的声光栅正弦光投射器具有很好的成像质量。应用该系统对在500mm处的石膏像上投射干涉条纹,可以得到能量比较均匀、变形量很小的干涉条纹图,利用该条纹图和相关的算法可以对具有复杂几何形状的物体进行有效的三维测量。     

DFT Investigations of Aun Nano-Clusters Supported on TiO2 Nanotubes: Structures and Electronic Properties

TiO₂ nanotubes (TiO₂NTs) are beneficial for photogenerated electron separation in photocatalysis. In order to improve the utilization rate of TiO₂NTs in the visible light region, an effective method is to use Au_n cluster deposition-modified TiO₂NTs. It is of great significance to investigate the mechanism of Au_n clusters supported on TiO₂NTs to strengthen its visible-light response. In this work, the structures, electronic properties, Mulliken atomic charge, density of states, band structure, and deformation density of Au_n (n = 1, 8, 13) clusters supported on TiO₂NTs were investigated by DMOL3. Based on published research results, the most stable adsorption configurations of Au_n (n = 1, 8, 13) clusters supported with TiO₂NTs were obtained. The adsorption energy increased as the number of Au adatoms increased linearly. The Au_n clusters supported on TiO₂NTs carry a negative charge. The band gaps of the three most stable structures of each adsorption system decreased compared to TiO₂NTs; the valence top and the conduction bottom of the Fermi level come mainly from the contribution of 5d and 6s-Au. The electronic properties of the 5d and 6s impurity orbitals cause valence widening and band gap narrowing.     

Surface anchoring energy and the first order Fréedericksz transition of a NLC cell

Many authors have suggested new forms to describe the surface anchoring energy of the liquid crystal-wall interface, replacing the Rapini-Papoular (RP) formula g s = (1/2) A sin2 theta. If the RP function is considered as the primary approximation, and a lowest order modification is included, then the surface anchoring energy can be represented by g s = (1/2) A sin2 theta(1 + zeta sin2 theta). zeta characterizes the modification to the RP formula and varies for the different energy forms. It is well known that the RP formula predicts a second order Freedericksz transition. This paper points out that the transition can be first order if the modification is taken into account, in which case at the threshold point the tilt angle of the director at the middle layer of the cell, thetam, is finite. The conditions for the existence of the first order transition are obtained; zeta < 0 is required for a first order transition. The approximate expression of the threshold field is also given.     

Cross-flow heat transfer in fixed bed

Radial flow reactor operated at cross-flow heat transfer is focused for large scale methanol synthesis. The effects of operating conditions including the reactor inlet air temperature, the heating pipe temperature and the air flow rate on the cross-flow heat transfer were investigated and results show that the temperature profile of the area in front of the heating pipe is slightly affected by all the operating conditions. The main area whose temperature profile is influenced is located behind the heating pipe. The heat transfer direction is related to the direction of the flow. In order to obtain the basic parameters for radial flow reactor designing calculation, the dimensionless number group method was used for data fitting of the bed effective thermal conductivity and the wall heat transfer coefficient which were calculated by the mathematical model with the product of Reynolds number and Prandtl number. The comparison of experimental data and calculated values shows that the calculated values fit the experimental data satisfactorily and the formulas can be used for reactor designing calculation.     

Poly(methyl methacrylate‐co‐pentaerythritol tetraacrylate‐co‐butyl methacrylate)‐g‐polystyrene: Synthesis and high oil‐absorption property

Well‐defined high oil‐absorption resin was successfully prepared via living radical polymerization on surface of polystyrene resin‐supported N‐chlorosulfonamide group utilizing methyl methacrylate and butyl methacrylate as monomers, ferric trichloride/iminodiacetic acid (FeCl₃/IDA) as catalyst system, pentaerythritol tetraacrylate as crosslinker, and L ‐ascorbic acid as reducing agent. The polymerization proceeded in a “living” polymerization manner as indicated by linearity kinetic plot of the polymerization. Effects of crosslinker, catalyst, macroinitiator, reducing agent on polymerization and absorption property were discussed in detail. The chemical structure of sorbent was determined by FTIR spectrometry. The oil‐absorption resin shows a toluene absorption capacity of 21 g g^?1. The adsorption of oil behaves as pseudo‐first‐order kinetic model rather than pseudo‐second‐order kinetic model. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Direct Henry reactions with modified calcium oxide as solid catalyst

Commercial CaO was modified simply with benzyl bromide. The modified CaO had good water resistance, and characterization by FTIR and TG revealed the modifier was chemically bonded to the CaO surface. Commercial CaO and CaO modified with benzyl bromide were investigated as catalysts for the Henry reaction between benzaldehyde and nitromethane. It was found that the catalytic activity of the modified CaO was greatly improved, with high conversion of benzaldehyde to the (E)-phenyl nitroolefin and 1-phenyl-2-nitroethanol, and with different selectivity from commercial CaO. The effect of modification and reaction conditions on yield, selectivity, and mechanism were studied thoroughly.     

利用倒谱方法实现气声发育的重建

本文介绍了一种利用复倒谱来实现气声发音重建的方法。首先分析了气声发音的语音特征；进而在复倒谱序列中加入基频特征使其恢复到正常的语音。对元音［a］以及实际语音段进行了处理，均有较好的效果。     

Organophosphine/phosphite‐stabilized silver(I) complexes bearing N‐acetylbenzamide ligand: synthesis,characterization and potential application in metal organic chemical vapor deposition

New N‐silver(I) acetylbenzamide complexes of type L_n?AgNC₉H₈O₂ (L = PPh₃; n = 1, 2a; n = 2, 2b; n = 3, 2c; L = P(OEt)₃; n = 1, 2d; n = 2, 2e; n = 3, 2f) were prepared. These complexes were obtained in high yields and characterized by elemental analysis, ¹H NMR, ¹³C{H} NMR, ³¹P{H} NMR and IR spectroscopy, respectively. The molecular structure of 2b has been determined by X‐ray single‐crystal analysis in which the silver atom is in a distorted tetrahedral geometry and crystallizes as cis–trans. New N‐silver(I) acetylbenzamide complexes have a four‐membered ring, which could influence their chemical and physical properties and modulate volatility. Metal organic chemical vapor deposition experiments were carried out successfully at 400°C and 450°C using 2e as precursor for the deposition of silver films, respectively. The high‐purity silver film obtained at 400°C is dense and homogeneous. Copyright © 2012 John Wiley & Sons, Ltd.