Understanding in-cylinder soot reduction in the use of high pressure fuel injection in a small-bore diesel engine

This study shows how soot particles inside the cylinder of the engine are reduced due to high pressure fuel injection used in a light-duty single-cylinder optical diesel engine fuelled with methyl decanoate, a selected surrogate fuel for the diagnostics. For various injection pressures, planar laser induced incandescence (PLII) imaging and planar laser-induced fluorescence of hydroxyl (OH-PLIF) imaging were performed to understand the temporal and spatial development of soot and high-temperature flames. In addition, a thermophoresis-based particle sampling technique was used to obtain transmission electron microscope (TEM) images of soot aggregates and primary particles for detailed morphology analysis. The OH-PLIF images suggest that an increase in the injection pressure leads to wider distribution of high-temperature flames likely due to better mixing. The enhanced high-temperature reaction can promote soot formation evidenced by both a faster increase of LII signals and larger soot aggregates on the TEM images. However, the increased OH radicals at higher injection pressure accelerates the soot oxidation as shown in a higher decreasing rate of LII signals as well as dramatic reduction of the sampled soot aggregates at later crank angles. The analysis of nanoscale carbon layer fringe structures also shows a consistent trend that, at higher injection pressure, the soot particles are more oxidized to form more graphitic carbon layer structures. Therefore, it is concluded that the in-cylinder soot reduction at higher injection pressure conditions is due to enhanced soot oxidation despite increased soot formation.     

Side chain impacts on pH‐ and thermo‐responsiveness of tertiary amine functionalized polypeptides

The systemic investigation of the structural impacts of side chains on the pH‐ and thermo‐responsiveness of tertiary amine functionalized poly(l ‐glutamate)s (TA‐PGs) was carried out. The TA‐PGs polymers were effectively synthesized by Cu(I)‐catalyzed azide‐alkyne cycloaddition click reaction of azido tertiary amines with poly(γ‐propargyl‐l ‐glutamate) (PPLG). Turbimetric measurements were performed to characterize the pH‐ and temperature‐induced phase transition of TA‐PGs in aqueous solution, which suggested a structural dependence of the properties on the N‐substituted groups and the “linkers” between 1,2,3‐triazole ring and the tertiary amine groups in the side chains. In detail, the pH responsive properties of TA‐PGs were basically determined by the hydrophobicity of the N‐substituted groups in the side chains and the pH transition point (pH_t) decreased as the increasing hydrophobicity of the N‐substituted groups, while the temperature‐responsiveness of TA‐PGs were affected by either the N‐substituted groups or the “linkers.” TA‐PGs with a moderate N‐substituted amine group (e.g., DEA, PR, and PD) or a branched “linker” (e.g., iso‐propylene and 2‐methylpropylene group) were more likely to express the LCST‐type phase transition tuned by pH variation. These structure–property relationships revealed in this study would help to develop the applications of TA‐PGs in smart drug delivery systems. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 671–679     

Effect of sound wave stress on antioxidant enzyme activities and lipid peroxidation of Dendrobium candidum

The effect of sound wave stress on important medicinal plant, Dendrobium candidum Wall. ex Lindl, was investigated, including the responses on malondialdehyde (MDA) content, the activities change of superoxide dismutase (SOD), catalase (CAT), peroxidase (POD) and ascorbate peroxidase (APX). Results were found that the activities of SOD, CAT, POD and APX enhanced totally in different organs of D. candidum, as leaves, stems and roots, in response to the stress. Furthermore there happened similar shift of antioxidant enzymes activities, which increased in the initial stimulation and decreased afterwards. Data showed SOD, CAT, POD and APX activities ascended to max at day 9, 6, 9 and 12 in leaves, at day 9, 6, 12 and 9 in stems, and at day 12, 6, 9 and 9 in roots, respectively. As a lipid peroxidation parameter, MDA content in different organs increased in the beginning, dropped afterward, and increased again in the late. Anyway the total trend was the rise of MDA level compared to the control. It was interesting that the MDA content appeared the lowest levels almost when the antioxidant enzymes activities were up to the highest. Our results demonstrated the different organs of D. candidum might produce accumulation of active oxygen species (AOS) under initial treatment of sound wave stress. Later AOS might start to reduce due to the enhancement of antioxidant enzymes activities treated by the stress. The data revealed that the antioxidant metabolism was to be important in determining the ability of plants to survive in sound stress, and the up regulation of these enzymes activities would help to reduce the build up of AOS, which could protect plant cells from oxidative damage. Moreover, different cell compartments might activate different defensive system to reduce excessive amount of AOS. Finally the mechanism of this action was also discussed simply.     

The calcined zeolitic imidazolate framework-8 (ZIF-8) under different conditions as electrode for supercapacitor applications

Zeolitic imidazolate framework-8 (ZIF-8) is synthesized by typical solvothermal method and subsequently calcined under air and nitrogen atmosphere, respectively. The carbon in the calcined ZIF-8 under nitrogen atmosphere was from the carbonization of the guest molecules, without adding any other carbon sources. The samples are characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and electrochemical analyzer system. When the ZIF-8 is used as electrode materials for a supercapacitor in 6 M KOH electrolyte, it displays a pseudocapacitive behavior. The untreated ZIF-8 and calcined ZIF-8 under air and nitrogen atmosphere electrodes exhibit a specific capacitance of 96, 156, and 185 F g^?1, respectively, at a scan rate of 5 mV s^?1 and good stability over 1,500 cycles. These results indicate that the ZIF-8 is a promising material for supercapacitors.     

五羟色胺分子选择性电极研究

本应用自己合成的联萘２０－冠－６作为活性载体，进行了五羟色胺分子选择性电极研究。电极在１０＾－＾５－１０＾－＾２ｍｏｌ／Ｌ浓度范围内对五羟色胺具有稳定的线性响应，平均斜率为６３ｍＶ／ＰＣ，检测下限为２．７×１０＾－＾６ｍｏｌ／Ｌ。     

胆固醇分子印迹聚合物的制备及其选择性吸附

随着人们生活水平的逐步提高,因人体内胆固醇过高所产生的疾病呈逐年增加的趋势.近年来的研究表明,胆固醇分子印迹聚合物对胆固醇具有良好的选择性吸附能力.将胆固醇分子印迹聚合物作为胆固醇的识别剂,提取食品中的胆固醇和治疔胆固醇有关的疾病,展现出了良好的应用前景.本文分别从胆固醇分子印迹聚合物的制备方法、识别机理、提高选择性识别途径以及新的印迹方法等方面进行了综述.     

非对称纳米材料的性质及其应用

具有非对称结构的纳米材料显示出独特的物理和化学性质,在生物传感、靶向药物运载以及分子检测等生物医学领域具有良好的应用前景.本文就非对称纳米材料的性质及其应用方面的最新研究进展进行了综述.首先,我们从三个不同方面讨论了非对称纳米材料的性质及相关应用,即表面双亲性、催化特性和生物相容性;然后着重强调了非对称纳米材料在生物医学上的应用,如生物传感、靶向运载、基因疫苗以及杀菌剂;最后,我们对非对称纳米材料在制备技术的改进及其在食品安全领域的应用作出了展望.     

Deep desulfurization by oxidation using an active ionic liquid‐supported Zr metal–organic framework as catalyst

In this study, a Zr metal–organic framework (UIO‐66) was synthesized with zirconium tetrachloride and terephthalic acid using the solvent method. Then various masses of 1‐methylimidazolium‐3‐propylsulfonate hydrosulfate (PSMIMHSO₄) were supported on the UIO‐66 as catalysts, which were used for catalytic oxidative desulfurization. Sulfur removal using 400 mg of 40% PSMIMHSO₄ supported on the UIO‐66 of greater than 94% was obtained at 313 K for 20 min with an O/S molar ratio of 7:1. The results obtained in this work could provide useful information for the design of water‐stable metal–organic frameworks with permanent porosity in applications of catalytic oxidative desulfurization. Copyright © 2014 John Wiley & Sons, Ltd.     

单宁酸/两性离子改性油-水分离膜的制备及性能

以不锈钢网为基材,利用单宁酸对不锈钢网进行表面预处理并功能化接枝两性离子基团,制备了新型亲水和水下超疏油的单宁酸/两性离子改性油-水分离膜(TA-ZW-SSM).利用X射线光电子能谱仪(XPS)、扫描电子显微镜(SEM)及接触角测量仪等表征了其化学结构、形态和润湿性.研究结果表明,两性离子基团通过化学键接枝在单宁酸预处理的不锈钢网表面.油-水分离实验结果表明,对于不同类型的油-水混合物,本文制备的超亲水和水下超疏油特性的TA-ZW-SSM可实现重力驱动的高效油-水分离,并具有较好的化学稳定性及再循环性.     

动态载荷下剪切变形局部化、微结构演化与剪切断裂研究进展

总结和评述了近年来金属与合金变形局部化的形成、微结构演化与剪切断裂方面作者和相关的研究工作成果. 材料包括低碳钢, SS304不锈钢, Fe-15%Ni-15%Cr单晶, Al-Li合金,α-Ti和Ti-6Al-4V, Al/SiCp复合材料等.综述内容主要包括:采用改进的Hopkinson扭杆装置,对剪切变形局部化形成、发展和演化过程进行了实验观察与数值模拟;采用"侧剖"与"对接"等定点方法制备电子显微镜薄膜试样,对剪切带内相变与再结晶、非晶转变、旋涡结构等动态变形现象,以及与宏观动态力学行为对应的位错胞的形成、发展和坍塌等微结构特征进行了观测;提出了应变和应变率同时作为剪切带形成的两个必要条件的直接实验证据;在剪切带内发现了α'$-马氏体相变现象,以及相变产物与母体之间的晶体学关系;通过位错单滑移或交滑移等微观剪切最后发展成为宏观剪切的机制;对剪切带内再结晶结构的观测和对再结晶动力学本构关系的定量描述;对剪切带特别是``白色'腐蚀带(或相变带)的形成机制的分析和新的解释,指出 ``白色'是带内亚结构取向趋于一致,其在光学或扫描显微镜下很难辨认这些亚结构的取向差所致,并非表明剪切带内一定发生了相变;通过截断实验和实时跟踪观测发现,剪切带内微裂纹的萌生与聚合是材料承载能力骤然下降并导致最后断裂的主控因素.此外,本文对近年来在准静态和循环加载下材料的局部化形变与剪切断裂的实验结果予以简要评述,指出其微观机制与动态载荷下的截然不同, 是由位错的平面滑移所控制的,与热效应无关的等温变形.