Probing the Adhesion of Hepatocellular Carcinoma HepG2 and SK‐Hep‐1 Cells

Carcinoma cell differentiation stage is an important indicator of cell behavior. For example, cell mobility is much higher for poorly‐differentiated hepatocellular carcinoma SK‐Hep‐1 cells than for well‐differentiated HepG2 cells. In this study, we have cultured HepG2 and SK‐Hep‐1 cells on chemically patterned polydimethylsiloxane (PDMS) substrates to observe differences in the adhesion properties and cell structure that occur due to the patterns. Both cell lines showed a preference for the hydrophobic regions on the patterned PDMS surface with SK‐Hep‐1 cells achieving a higher density than HepG2 for the same cell‐count solutions. Further, SK‐Hep‐1 cells adopted the square or hexagonal shape of the surface patterns while HepG2 cells maintained their more rounded shape. AFM force measurement arrays were also performed on the cell surfaces to measure and map adhesion values between the tip and cell surface membrane. These results demonstrate that, in addition to cell shape and size, adhesion expression in hepatocellular carcinoma cells is differentiation stage dependent. Further, the ability of the SK‐Hep‐1 cells to adopt the shape of the substrate pattern indicates they are more structurally labile, which may contribute to their higher mobility.     

Electrophoresis of a sphere at an arbitrary position in a spherical cavity filled with Carreau fluid

Boundary effects on the electrophoretic behavior of a charged entity are of both fundamental and practical significance. Here, they are examined by considering the case where a sphere is at an arbitrary position in a spherical cavity under conditions of low surface potential and weak applied electrical field. Previous analyses are extended to the case of a non-Newtonian fluid, and a Carreau model is adopted for this purpose. The effects of key parameters such as the thickness of a double layer, the relative sizes of particle and cavity, the position of a particle, and the nature of a fluid on the electrophoretic mobility of a particle are discussed. Several interesting phenomena are observed. For example, if the applied electric field points toward north, the mobility of a particle has a local maximum when it is at the center of a cavity. However, if a particle is sufficiently close to the north pole of a cavity, its mobility exhibits a local minimum as its position varies. This does not occur when the particle is close to the south pole of the cavity; instead, it may move in the direction opposite to that of the applied electric field. For a Newtonian fluid, if a particle is close to the north pole of a cavity, its upward movement yields a clockwise (counterclockwise) vortex near the north pole of the cavity and a counterclockwise (clockwise) vortex near the south pole of the cavity on its right (left)-hand side. The latter is not observed for a Carreau fluid.     

The first, discrete Zn4 tetrahedron with a selenium atom in the center: x-ray structure and solution study of [Zn4(mu4-Se)[Se2P(OPr)2]6

The first discrete, selenium-centered tetranuclear zinc cluster [Zn4(mu4-Se)[Se2P(OPr)2]6] was isolated and characterized. The cluster consists of six edge-bridged dsep ligands with four zinc atoms in a slightly distorted tetrahedron and a mu4-Se atom in the center. In addition, 12 mu2-bridging selenium atoms form a Se12 icosahedron. From variable-temperature 31P NMR studies, it was observed that the cluster [Zn4(Se)[Se2P(OPr)2]6] is partly decomposed to [Zn[Se2P(OPr)2]2] and the monomeric species [Zn[Se2P(OPr)2]2] is further in equilibrium with its dimer [Zn[Se2P(OPr)2]2]2.     

Electronic quantum motions in hydrogen molecule ion

The hydrogen molecule ion is a two‐center force system expressed under the prolate spheroidal coordinates, whose quantum motions and quantum trajectories have never been addressed in the literature before. The momentum operators in this coordinate system are derived for the first time from the Hamilton equations of motion and used to construct the Hamiltonian operator. The resulting Hamiltonian comprises a kinetic energy T and a total potential V_Total consisting of the Coulomb potential and a quantum potential. It is shown that the participation of the quantum potential and the accompanied quantum forces in the force interaction within H₂⁺ is essential to develop an electronic motion consistent with the prediction of the probability density function |Ψ|². The motion of the electron in H₂⁺ can be either described by the Hamilton equations derived from the Hamiltonian H = T_K + V_Total or by the Lagrange equations derived from the Lagrangian H = T_K ? V_Total. Solving the equations of motion with different initial positions, we show that the solutions yield an assembly of electronic quantum trajectories whose distribution and concentration reconstruct the σ and π molecular orbitals in H₂⁺. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Excited‐State Dynamics of the Metal String Complex Co3(dpa)4(NCS)2 from Femtosecond Transient Absorption Spectra

Transient absorption spectroscopy is used to study the excited‐state dynamics of Co₃(dpa)₄(NCS)₂, where dpa is the ligand di(2‐pyridyl)amido. The ππ*, charge‐transfer, and d–d transition states are excited upon irradiation at wavelengths of 330, 400 and 600 nm, respectively. Similar transient spectra are observed under the experimental temporal resolution and the transient species show weak absorption. We thus propose that a low‐lying metal‐centered d–d state is accessed immediately after excitation. Analyses of the experimental kinetic traces reveal rapid conversion from the ligand‐centered ππ* and the charge‐transfer states to this metal‐centered d‐d state within 100 fs. The excited molecule then crosses to a second d–d state within the ligand‐field manifold, with a time coefficient of 0.6–1.4 ps. Because the ground‐state bleaching band recovers with a time coefficient of 10–23 ps, we propose that an excited molecule crosses from the low‐lying d–d state either directly within the same spin system or with spin crossing via the state ²B to the ground state ²A₂ (symmetry group C₄). In this trimetal string complex, relaxation to the ground electronic surface after excitation is thus rapid.     

Rhodamine‐Ethylenediol,A Novel Vital Fluorescent Probe for Labelling Alkaline Phosphatase‐Rich Organelles

Zebrafish have received considerable attention as an organism‐based model in the development of pharmacological agents.^1,2 Many small molecules applied to zebrafish show important behaviours and may constitute new kinds of markers for clinical purposes.³ Analysis of these molecules can facilitate the development of useful tools for monitoring environmental changes.⁴ Many chemicals that are toxic to the environment are known to influence the sensory systems of humans⁵ and fish.⁶ One important sensory system in all fish is the lateral line organ,⁷ which is readily accessible for the assessment of environmental changes.⁸ Neuromasts, which are located on the surface of the fish body, are one of the major components of the lateral lines of the zebrafish.⁹ Copper‐enriched water is known to affect the olfactory system in fish. Therefore, small molecules that induce specific patterns in the neuromasts of zebrafish should provide an important animal model with which to explore the effects of environmental changes on the sensory system.^10,11 Recently, chemical sensors based on the rhodamine skeleton¹² have been designed to specifically detect metal ions, such as Cu(II)¹³ and Fe(III)/Hg(II),¹⁴ in zebrafish. However, there has been no report of these rhodamine derivatives used in the specific recognition of the sensory system of zebrafish. Commonly, the sensory system is studied with antibody staining assays of scarified fish. Here, we report that a new rhodamine derivative can be used as a fluorescent chemical probe to visualize the neuromasts and intestinal villi of living zebrafish. Based on the specific recognition of this area in zebrafish, we narrowed the possible enzymes targeted by this rhodamine probe to alkaline phosphatase and confirmed this with a binding assay. It is a well‐recognized challenge to develop a fluorescent chemical probe that specifically recognizes a particular enzyme. Furthermore, the transfer of phosphate groups to certain enzymes can activate their catalytic reactivity, triggering a cascade reaction in a signal transduction pathway. The alkaline‐phosphatase‐specific recognition by this rhodamine derivative may be applicable to clinical purposes.     

Flexible nanocrystalline‐titania/polyimide hybrids with high refractive index and excellent thermal dimensional stability

In this study, a novel synthetic route was developed to prepare polyimide–nanocrystalline–titania hybrid optical films with a relatively high titania content (up to 50 wt %) and thickness (20–30 μm) from soluble polyimides containing hydroxyl groups. Two series of newly soluble polyimides were synthesized from the hydroxy‐substituted diamines with various commercial tetracarboxylic dianhydrides. The hydroxyl groups on the backbone of the polyimides could provide the organic–inorganic bonding and resulted in homogeneous hybrid solutions by controlling the mole ratio of titanium butoxide/hydroxyl group. AFM, SEM, TEM, and XRD results indicated the formation of well‐dispersed nanocrystalline‐titania. The flexible hybrid films could be successfully obtained and revealed relatively good surface planarity, thermal dimensional stability, tunable refractive index, and high optical transparency. A three‐layer antireflection coating based on the hybrid films was prepared and showed a reflectance of less than 0.5% in the visible range indicated its potential optical applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1433–1440, 2010     

Characterizing fracture energy of proton exchange membranes using a knife slit test

Pinhole formation in proton exchange membranes (PEM) may be caused by a process of flaw formation and crack propagation within membranes exposed to cyclic hygrothermal loading. Fracture mechanics can be used to characterize the propagation process, which is thought to occur in a slow, time‐dependent manner under cyclic loading conditions, and believed to be associated with limited plasticity. The intrinsic fracture energy has been used to characterize the fracture resistance of polymeric material with limited viscoelastic and plastic dissipation, and has been found to be associated with long‐term durability of polymeric materials. Insight into this limiting value of fracture energy may be useful in characterizing the durability of proton exchange membranes, including the formation of pinhole defects. In an effort to collect fracture data with limited plasticity, a knife slit test was adapted to measure fracture energies of PEMs, resulting in fracture energies that were two orders of magnitude smaller than those obtained with other fracture test methods. The presence of a sharp knife blade reduces crack tip plasticity, providing fracture energies that may be more representative of the intrinsic fracture energies of the thin membranes. Three commercial PEMs were tested to evaluate their fracture energies (G_c) at temperatures ranging from 40 to 90 °C and humidity levels varying from dry to 90% relative humidity (RH). Experiments were also conducted with membrane specimens immersed in water at various temperatures. The time temperature moisture superposition principle was applied to generate fracture energy master curves plotted as a function of reduced cutting rate based on the humidity and temperature conditions of the tests. The shift with respect to temperature and humidity suggests that the slitting process is viscoelastic in nature. Also such shifts were found to be consistent with those obtained from constitutive tests such as stress relaxation. The fracture energy is more sensitive to temperature than on humidity. The master curves converge at the lowest reduced cutting rates, suggesting similar intrinsic fracture energies; but diverge at higher reduced cutting rates to significantly different fracture energies. Although the relationship between G_c and ultimate mechanical durability has not been established, the test method may hold promise for investigating and comparing membrane resistance to failure in fuel cell environments. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 333–343, 2010