Laser-ionization mass-spectrometric studies on laser ablation of a nitrogen-rich polymer at 532 nm and 1064 nm

Laser-ionization Time-Of-Flight (TOF) mass-spectrometric studies have been carried out on the 532 nm and 1064 nm laser ablation products from a nitrogen-rich polymer. The polymer used had an elemental composition of C_6.0N_8.9H_3.4 and consisted of C=N, C-N, and N-H chemical bonds. The TOF mass spectra observed were composed of various peaks (150 amu) depending on the ablation laser wavelength. The primary peaks were assigned to C⁺, CN⁺, CHnN⁺ ₂ (n=1–3) and C₂H₂N⁺ ₃ for 532 nm ablation, and C⁺, C⁺ ₃, HCN⁺, HCCN⁺, CH₂NH⁺, HNCN⁺, H₃NCN⁺, and C₄H₄N⁺ ₇ for 1064 nm ablation. The flight velocity distributions with peak velocities ranging from 8.6×10³ cm/s to 3.8×10⁴ cm/s were measured for these products. The distinct velocity distributions observed between small and large products indicate the presence of two origins in the fragment ejection process from the polymer for both 532 nm and 1064 nm ablation. Furthermore, we suggest an importance of the translational energy of the fragments for the product generation in the laser plume.     

Concise synthesis of pyrrolophenanthridine alkaloids using a Pd-mediated biaryl coupling reaction with regioselective C-H activation via the intramolecular coordination of the amine to Pd

The concise synthesis of Amaryllidaceae alkaloids, such as anhydrolycorinone, anhydrolycorin-7-one, assoanine, and oxoassoanine, which have a pyrrolophenanthridine skeleton, was achieved in moderate yield using the Pd-mediated biaryl coupling reaction of 1-(2-halobenzyl)-2,3-dihydroindole, which applied the regioselective C-H activation method with intramolecular coordination of the benzylamino group to Pd.     

Coprecipitation with metal hydroxides for the determination of beryllium in seawater by graphite furnace atomic absorption spectrometry

Coprecipitation first with magnesium hydroxide, next with tin(IV) hydroxide is developed for the determination of traces of beryllium in sea-water. To a 200-ml sample is added a sodium hydroxide solution to form magnesium hydroxide at pH 11.5, on which beryllium is quantitatively coprecipitated. The precipitate is separated by centrifugation and dissolved in 2 ml of 12 mol/l hydrochloric acid. The resulting solution (ca. 10 ml) is mixed with 2 mg of tin (IV) carrier and the pH is adjusted to 5.0 to collect the beryllium on tin (IV) hydroxide, leaving magnesium ions in the solution. The tin (IV) hydroxide is centrifuged, dissolved in 0.1 ml of 5 mol/l hydrobromic acid, and then diluted to 1 ml with water. Magnesium is so added as to be 500 g/ml for increasing the sensitivity about four times, and the beryllium in the solution is determined by graphite furnace atomic absorption spectrometry. The experiments with synthetic seawater samples showed that pg — g amounts of beryllium can be coprecipitated on the metal hydroxides and beryllium at the low ng/1 level can be determined with reasonable precision (RSD < 10%). The detection limit of the proposed method is 0.5 ng/l of beryllium in seawater.     

Novel real-time sensors to quantitatively assess in vivo inositol 1,4,5-trisphosphate production in intact cells

Real-time observation of messenger molecules in individual intact cells is essential for physiological studies of signaling mechanisms. We have developed a novel inositol 1,4,5-trisphosphate (IP(3)) sensor based on the pleckstrin homology (PH) domain from phospholipase C (PLC) delta. The environmentally sensitive fluorophore 6-bromoacetyl-2-dimethyl-aminonaphtalene was conjugated to the genetically introduced cysteine at the mouth of the IP(3) binding pocket for enhanced IP(3) selectivity and for rapid and direct visualization of intracellular IP(3) > or = 0.5 microM as fluorescence emission decreased. The probe, tagged with arginine-rich sequences for efficient translocation into various cell types, revealed a major contribution of Ca2+ influx to PLC-mediated IP(3) production that boosts Ca2+ release from endoplasmic reticulum. Thus, our IP(3) probe was extremely effective to quantitatively assess real-time physiological IP(3) production via those pathways formed only in the intact cellular configuration.     

Mechanism of plasma-initiated polymerization: Concerning the nature of solvent effects on the lifelike polymerization of water-soluble vinyl monomers

To provide a satisfactory basic understanding of the solvent effect of plasma-initiated polymerization, we have carried out several kinds of polymerizations of various water-soluble vinyl monomers. It has been shown that aqueous solution of such vinyl monomers underwent the polymerizations induced by methyl isobutyrate (MIB) plasma-exposed glass surface. The invisible ultrathin polymer film trapping an active radical species deposited on the plasma-exposed glass surface apparently induced the polymerizations. The efficiency, however, was largely dependent on the solvent used: the solvent can be considered to act as “an initiation-activator” for the lifelike postpolymerization. The nature of the solvent effect was ascribed to the physicomechanical property such as swelling ability and/or solubility toward the ultrathin film formed on the glass surface. Thus it has been suggested that the choice of good-balanced combination between the structural feature of the plasma-induced ultrathin polymer film and the solvent as an initiation-activator is important to achieve activity of a desired solution polymerization.     

Bromination by means of sodium monobromoisocyanurate (SMBI)

A variety of aromatic compounds with both activating and deactivating substituents were brominated with sodium monobromoisocyanurate (SMBI) 1, diethyl ether, diethyl ether-methanesulfonic acid, trifluoroacetic acid, or sulfuric acid were employed as solvents. Thus nitrobenzene was conveniently brominated in sulfuric acid, benzene was readily monobrominated in diethyl ether-methanesulfonic acid, and phenol was selectively brominated at the ortho position under mild conditions in refluxing diethyl ether. With substituents that are easily protonated, trifluoroacetic acid may be employed as solvent in the reaction with 1, in contrast NBS was ineffective in trifluoroacetic acid. This renders 1 a superior reagent relative to NBS. In addition to aromatics, alkenes, ketones and esters were also brominated with 1. Diethyl malonate was brominated with 1 and then subjected to a Bingel reaction with NaH to afford the desired methanofullerene in reasonable yield.     

Selective formation of AAB- and ABC-type heterotrimeric alpha-helical coiled coils

The alpha-helical coiled coils have a representative amino acid sequence of (abcdefg)(n) heptad repeats. We previously reported that two peptides named IZ-2A and IZ-2W formed an (IZ-2A)(2)/IZ-2W heterotrimer with an Ala-Ala-Trp interaction in the hydrophobic core. In this paper, we describe the selective formation of AAB- and ABC-type heterotrimers. To increase the selectivity of the AAB-type heterotrimeric formation, Lys residues at the f position were mutated to either an Ala or a Gln residue to form IZ-2A(fA) or IZ-2W(fQ). Separately, both IZ-2A(fA) and IZ-2W(fQ) have a random structure at pH 7 and 20 degrees C. However, together IZ-2A(fA) and IZ-2W(fQ) form a 2:1 complex with a thermal transition midpoint (Tm) of 48 degrees C. This procedure was applied to prepare the ABC-type heterotrimer, in which two sets of Ala-Ala-Trp interactions were designed in the hydrophobic core. Interhelical interaction between the e and g positions and the alpha-helical propensity of the amino acid at the f position were also considered in the design. The resultant three peptides selectively formed the ABC-type heterotrimer with a Tm of 51 degrees C. Other peptide combinations had random coil properties.