Thermosensitive pickering emulsion stabilized by poly(N-isopropylacrylamide)-carrying particles

Poly(N-isopropylacrylamide) (PNIPAM)-carrying particles were characterized as thermosensitive Pickering emulsifiers. Emulsions were prepared from various oils, such as heptane, hexadecane, trichloroethylene, and toluene, with PNIPAM-carrying particles. PNIPAM-carrying particles preferentially formed oil-in-water (O/W)-type emulsions with a variety of oils. All the emulsions stabilized by PNIPAM-carrying particles were stable for more than 3 months as long as they were stored at room temperature. However, when the emulsions were heated from room temperature to 40 degrees C, at which point the PNIPAM layer caused a coil-to-globule transition, phase separation occurred. Thus, by using thermosensitive PNIPAM-carrying particles as emulsifiers, the stability of the Pickering emulsions could be controlled by a slight change in temperature.     

Self-organization of polymer particles on hydrophobic solid substrates in aqueous media. II. Self-organization of cationic polymer particles on polymer films and wettability control with particle monolayers

Self-organization of cationic polymer particles through hydrophobic interaction on polymer films in aqueous system and characteristic properties of the resulting particle monolayers were investigated. Cationic polymer particles bearing quaternary ammonium groups on their surfaces effectively self-organized on polymer films. With an increase of the particle surface charge density, the surface coverage and average aggregate size (N _a) decreased. The surface coverage control was accomplished by tuning the ionic strength of the media. The wettability of polymer films for water was imparted by the formation of particle monolayers on them. Annealing of the particle monolayers resulted in the increase of the adhesive strength, while the wettability for water was lost. Further improvements of both wettability and adhesive strength of particle monolayers were achieved by the immobilization of silica colloids on the particle monolayers. This method would be effective for the hydrophilization of polymer films.     

Synthesis of spirodienones by intramolecular ipso-cyclization of N-methoxy-(4-halogenophenyl)amides using [hydroxy(tosyloxy)iodo]benzene in trifluoroethanol

Spirodienones bearing the 1-azaspiro[4.5]decane ring system have been synthesized from N-methoxy-(4-halogenophenyl)amides by the intramolecular ipso attack of a nitrenium ion generated with [hydroxy(tosyloxy)iodo]benzene in trifluoroethanol.     

Vertically Coupled Microring Resonator Filter : Versatile Building Block for VLSI Filter Circuits

In this review, the recent progress in the development of vertically coupled micro-ring resonator filters is summarized and the potential applications of the filters leading to the development of VLSI photonics are described.     

Preparation and characterization of novel polyaryloxydiphenylsilanes with high glass transition temperature by melt polycondensation of dianilinodiphenylsilane with bisphenols

Novel polyaryloxydiphenylsilanes with reduced viscosities of 0.31–0.65 dL/g were obtained by the melt polycondensation of dianilinodiphenylsilane with three bisphenols, 2,2-bis (4-hydroxyphenyl)-1,1,1,3,3,3-hexafluoropropane, 3 (4-hydroxyphenyl)-1,1,3-trimethyl-5-indanol, and 9,9-bis (4-hydroxyphenyl) fluorene, at 200–320°C in vacuo. These polymers are all amorphous and readily soluble in a wide variety of organic solvents such as chlorinated and aromatic hydrocarbons, cyclic ethers, and polar aprotic solvents. Because of their bulky and/or rigid ring structures, polyaryloxydiphenylsilanes containing diphenylhexafluoropropane, phenylindane, and diphenylfluorene units in the main chain have high glass transition temperatures of 106, 112, and 172°C, respectively. They are thermally stable showing almost no weight loss up to 350°C in air. Colorless, transparent, but brittle films are obtained from these polymers by solution casting. Ultraviolet transmission is sharply cut off by these polyaryloxydiphenylsilane films at ca. 300 nm, and the cut-off wavelength depends on the bisphenols used.     

Study of thermodynamic stabilities of polytypes of n-C36H74 by solubility measurements and incoherent inelastic neutron scattering

The thermodynamic properties of the two polytypes of n-hexatriacontane (n-C36H74), single-layered structure Mon and double-layered structure Orth II have been investigated by means of solubility measurements and incoherent inelastic neutron scattering. The solubility measurements reveal that Orth II is more stable than Mon by 1.2 kJ/mol because of the advantage of larger entropy. The neutron scattering measurements show that the vibrational modes of Orth II shift to the lower frequencies compared with those of Mon in the frequency region below 120 cm(-1). The advantage of Orth II in vibrational entropy due to the low-frequency shifts is estimated to be 9.6 J K(-1)/mol at 288 K under the harmonic approximation, which nearly agrees with the entropy difference of 6.8 J K(-1)/mol between Mon and Orth II determined by solubility measurements. These results suggest that the difference in vibrational entropy due to low-frequency modes mainly contributes to the relative thermodynamic stabilities of polytypic structures of long-chain compounds. From the frequency of methyl torsional mode, it is suggested that the cohesive force at the lamellar interface is stronger in Mon than in Orth II.     

High resolution emission Fourier transform infrared spectra of the 4p-5s and 5p-6s bands of ArH

In the 2500-8500 cm(-1) region several strong emission bands of (40)ArH were observed by Fourier transform spectroscopy through a dc glow discharge in a mixture of argon and hydrogen. Rotational-electronic transitions of the two previously unstudied 4p-5s and 5p-6s,v = 0-0, bands of (40)ArH were measured and assigned in the 6060 and 3770 cm(-1) regions, respectively. A simultaneous fit of the emission transitions of the 4p-5s and 5p-6s bands and an extended set of transitions of the 6s-4p band observed by Dabrowski, Tokaryk, and Watson [J. Mol. Spectrosc. 189, 95 (1998)] and remeasured in the present work yielded consistent values of the spectroscopic parameters of the electronic states under investigation. In the branch of the 4p-5s band with transitions of type (Q)Q(f(3)e) we observed a narrowing in the linewidths with increasing rotational quantum number N. The rotational dependence of the linewidth is caused by predissociation of the 5s state by the repulsive ground 4s state through homogeneous coupling and changes in overlap integrals of the vibrational wave functions with the rotational level. Analysis was based on the Fermi's golden rule approximation model. In the 4p-5s band region a vibrational sequence ofv(')-v(")=1-1, 2-2, and 3-3 were recorded and a number of transitions belonging to the strongest (Q)Q(f(3)e) form branch of the 1-1 band were analyzed.     

A recyclable, self-supported organocatalyst based on a poly(N-heterocyclic carbene)

We report the synthesis and catalytic activity of a polymeric imidazolium salt. In contrast to the well-known resin-supported N-heterocyclic carbenes (NHCs), the material described herein affords a polymer with NHCs orthogonally positioned along a main chain upon generation in situ. The unique structural characteristics of the corresponding poly(NHC)s enabled the materials to display catalytic activities that were similar or superior to those displayed by monomeric analogues. Moreover, the new catalyst was successfully recovered and reused with minimal loss of performance over several cycles.     

Cyclopalladation of the indole ring in palladium(II) complexes of 2N1O-donor ligands and its dependence on the O-donor properties

Synthetic, structural, spectroscopic, and kinetic studies have been carried out on the Pd(II) complexes of new 2N1O-donor ligands containing a pendent indole, 3-(N-2-pyridylmethyl-N-2-hydroxy-5-methoxybenzylamino)ethylindole (HMeO-iepp), 3-(N-2-pyridylmethyl-N-2-hydroxy-5-nitrobenzylamino)ethylindole (HNO2-iepp), and (N-2-pyridylmethyl-3-indolylethylamino)acetic acid (Hiepc) (H denotes a dissociable proton). [Pd(MeO-iepp)Cl] (2), [Pd(NO2-iepp)Cl] (3), and [Pd(iepc)Cl] (4) were prepared and revealed by X-ray analysis to have a pyridine nitrogen, an amine nitrogen, a phenolate or carboxylate oxygen, and a chloride ion in the coordination plane. UV absorption and 1H NMR spectral changes indicated that all the complexes could be converted to the indole-binding complexes where the O donor was replaced by the indole C2 atom by cyclopalladation in DMSO or DMF in the temperature range of 40-60 degrees C. Formation of the indole-binding complex species obeyed the first-order kinetics, from which the activation parameters were estimated. The formation rate was dependent on the properties of the O-donor group, a lower pKa value of its conjugate acid causing faster conversion to the indole-binding species in the order 2 (methoxyphenolate) < 3 (nitrophenolate) < 4 (carboxylate). On the other hand, the ratio of the indole-binding complex to the O-donor complex as a result of the conversion was greater for the complexes with a higher pKa value of the ligand OH group, the order being 2 > 3 > 4.