Structure of nm-sized InSb clusters formed by spontaneous alloying

The negative ion photoelectron spectrum of⁷Li ₂ ^– is reported at 488 nm (2.540 eV). Three electronic bands are observed in this spectrum and are assigned to the following photodetachment transitions:⁷Li₂,X ¹ _g ⁺ +e ^{– 7}Li ₂ ^– ,X ² _u ⁺ ;⁷Li₂,a ³ _u ⁺ +e ^{– 7}Li ₂ ^– ,X ² _u ⁺ ; and⁷Li₂,A ¹ _u ⁺ +e ^{– 7}Li ₂ ^– ,X ² _u ⁺ . The electron affinity of⁷Li₂ is determined to be 0.437±0.009 eV, leading to an anion dissociation energy,D ₀, of 0.865±0.022 eV for the ground state of⁷Li ₂ ^– . A Franck-Condon analysis of the⁷Li₂,X ¹ _g ⁺ +e ^{– 7}Li ₂ ^– ,X ² _u ⁺ band yields the following spectroscopic constants for the ground state of⁷Li ₂ ^– :B _e =0.502±0.005 cm^–1,r _e =3.094±0.015 Å, and _e =232±35 cm^–1.     

4‐Vinyl­benzoic acid and 9‐vinyl­anthracene

The crystal structures of two styrene analogues, 4‐vinyl­benzoic acid, C₉H₈O₂, (I), and 9‐vinyl­anthracene, C₁₆H₁₂, (II), were determined by X‐ray analyses at 108 and 293 K for (I) and at 123 and 293 K for (II). In (I), a pair of mol­ecules around an inversion center form a dimer connected by two carboxyl groups. The anthracene planes of two mol­ecules in (II) are antiparallel to each other around an inversion center. The vinyl group of (I) is almost coplanar with the phenyl ring, whereas the vinyl group of (II) is nearly perpendicular to the anthracene plane. In (I), the bond length of the vinyl group at 293 K is significantly shorter than that at 108 K [1.288 (2) versus 1.3248 (14) Å] suggesting a bias of the thermal motion, whereas the bond lengths are not so different between the two temperatures in (II) [1.3266 (15) versus 1.310 (2) Å].     

Copper‐Catalyzed Enantioselective Allyl–Allyl Coupling between Allylic Boronates and Phosphates with a Phenol/N‐Heterocyclic Carbene Chiral Ligand

Copper‐catalyzed enantioselective allyl–allyl coupling between allylboronates and either Z‐acyclic or cyclic allylic phosphates using a new chiral N‐heterocyclic carbene ligand, bearing a phenolic hydroxy, is reported. This reaction occurs with exceptional S_N2′‐type regioselectivities and high enantioselectivities to deliver chiral 1,5‐diene derivatives with a tertiary stereogenic center at the allylic/homoallylic position.     

Construction of Hexahydrophenanthrenes By Rhodium(I)‐Catalyzed Cycloisomerization of Benzylallene‐Substituted Internal Alkynes through C−H Activation

The treatment of benzylallene‐substituted internal alkynes with [RhCl(CO)₂]₂ effects a novel cycloisomerization by C(sp²)?H bond activation to produce hexahydrophenanthrene derivatives. The reaction likely proceeds through consecutive formation of a rhodabicyclo[4.3.0] intermediate, σ‐bond metathesis between the C(sp²)?H bond on the benzene ring and the C(sp²)?Rh^III bond, and isomerization between three σ‐, π‐, and σ‐allylrhodium(III) species, which was proposed based on experiments with deuterated substrates.     

Formation and Electrical Evaluation of a Single Metallized DNA Nanowire in a Nanochannel

A novel fabrication process was developed for a single silver nanowire using DNA metallization in a nanochannel, and the electrical properties of this nanowire were evaluated using electrochemical impedance spectroscopy. After being isolated using a nanochannel measuring 500 nm in depth and 500 nm in width, a single λDNA molecule was electrostatically stretched and immobilized between two electrodes separated by a gap of 15 μm by applying an AC voltage of 1 MHz and 20 V_p‐p. Then, naphthalene diimide molecules terminally‐labeled with galactose moieties were intercalated into the λDNA, and the reduction of silver ions along the λDNA led to its metallization with silver. Scanning electron microscopy observations revealed that two nanowires having different average widths of 154 nm and 250 nm were formed in two individual nanochannels. The nanowires showed the linear current‐voltage characteristics, and their combined resistance was estimated to be 45.5 Ω. The complex impedance of the nanowires was measured, and an equivalent circuit was obtained as a series connection of a resistance and a parallel resistance‐constant phase element circuit. Impedance analysis revealed that the nanowire included silver grain boundaries, and the bulk resistivity of silver grain was estimated to be 8.35×10^?8 Ωm.     

Chemo‐ and Regioselective Rhodium(I)‐Catalyzed [2+2+2] Cycloaddition of Allenynes with Alkynes

A highly chemo‐ and regioselective partially intramolecular rhodium(I)‐catalyzed [2+2+2] cycloaddition of allenynes with alkynes is described. A range of diverse polysubstituted benzene derivatives could be synthesized in good to excellent yields, in which the allenynes served as synthetic equivalent to the diynes. A high regioselectivity could be observed when allenynes were treated with unsymmetrical alkynes.     

π‐Electron Systems That Form Planar and Interlocked Anion Complexes and Their Ion‐Pairing Assemblies

Interactions between designed charged species are important for the ordered arrangements of π‐electron systems in assembled structures. As precursors of π‐electron anion units, new arylethynyl‐substituted dipyrrolyldiketone boron complexes, which showed anion‐responsive behavior, were synthesized. They formed a variety of receptor–anion complexes ([1+1] and [2+1] types) in solution, and the stabilities of these complexes were discussed in terms of their thermodynamic parameters. Solid‐state ion‐pairing assemblies of [1+1]‐ and [2+1]‐type complexes with countercations were also revealed by single‐crystal X‐ray analysis. In particular, a totally charge‐segregated assembly was constructed based on negatively and positively charged layers fabricated from [2+1]‐type receptor–anion complexes and tetrabutylammonium cations, respectively. Furthermore, the [1+1]‐type anion complex of the receptor possessing long alkyl chains exhibited mesophases based on columnar assembled structures with contributions from charge‐by‐charge and charge‐segregated arrangements, which exhibited charge‐carrier transporting properties.     

Synthesis of poly(lactide‐ran‐MOHEL) and its biodegradation with proteinase K

Homopoly(L ‐lactide) and homopoly(D,L ‐lactide) were almost inert for biodegradation with tricine buffer or normal enzymes such as bromelain, pronase, and cholesterol esterase but biodegradable with proteinase K. Significantly enhanced biodegradation was observed when an optically active (R)‐ or (S)‐3‐methyl‐4‐oxa‐6‐hexanolide (MOHEL) unit was introduced into poly(L ‐lactide) [poly(L ‐LA)] or poly(D,L ‐lactide) [poly(D,L ‐LA)] sequences. Poly[L ‐LA‐ran‐(R)‐MOHEL] in molar ratios of 86/14 to 43/57 showed good biodegradability that was independent of crystallinity. The biodegradation of polymers with proteinase K increased in the following order: poly[D,L ‐LA‐ran‐(R)‐MOHEL] > poly[L ‐LA‐ran‐(R)‐MOHEL] > poly[D,L ‐LA‐ran‐(S)‐MOHEL] > poly[L ‐LA‐ran‐(S)‐MOHEL] > poly(R)‐MOHEL > poly(D,L ‐LA). The number‐average molecular weight, molecular weight distribution, glass‐transition temperature, and melting temperature did not change before and after the biodegradation of poly[L ‐LA‐ran‐(R)‐MOHEL], indicating that the degradation occurred from the polymer surface. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1374–1381, 2001     

Alternating copolymer based on sulfonamide‐substituted phenylmaleimide and vinyl monomers as polymer electrolyte membrane

The alternating copolymerization of phenylmaleimide (PMI) with a pendant sulfonamide acid group (sa‐PMI) and n‐butyl vinyl ether (BVE) as the aliphatic vinyl monomer afforded proton‐conducting polymer electrolytes—sa‐PMI‐BVEs—and their properties were compared with those of sa‐PMI‐STs that were synthesized from sa‐PMI and styrene. The ion exchange capacities (IECs) can be easily controlled by partly replacing sa‐PMI with unsubstituted PMI. sa‐PMI‐BVE is more flexible than sa‐PMI‐ST, and therefore, forms thin membranes even at high IECs, while sa‐PMI‐ST membranes are rigid and brittle. However, sa‐PMI‐BVE exhibits rather low thermal and oxidative stability. To realize polymer electrolyte membranes with reliable mechanical strength and a high IEC, gel‐filled membranes were prepared by polymerization in the presence of a small amount of a crosslinker, divinylbenzene, in porous polytetrafluoroethylene membranes. By using the gel‐filled membrane, H₂/O₂ fuel cells could be operated at 80 °C with reasonable performance. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013