Laser-induced damage of high reflectors for Ti:sapphire laser system

A broadband (～ 176 nm, R ＞ 98%, λ0 = 800 nm) and high laser-induced damage threshold (LIDT =2.4 J/cm2) TiO2/HfO2/SiO2 high reflector (HR) for Ti:sapphire chirped-pulse amplification (CPA) laser system is fabricated by the electron beam evaporation. The refractive index and extinction coefficient of TiO2 and HfO2 films are calculated from single-layer films' transmittance spectra. The properties of HR are mainly determined by the high refractive index material. The high refractive index leads to wide bandwidth. A low extinction coefficient indicates low absorption and high LIDT. The possible damage mechanism of HR is discussed.     

Synthesis of two dihydropyrroloindoledione‐based copolymers for organic electronics

Two novel dihydropyrroloindoledione (DPID)‐based copolymers have been synthesized in a two directional approach and characterized (gel permeation chromatography (GPC), ultraviolet‐visible (UV–vis), cyclic voltammetry, and computational models). These planar, broad absorption copolymers show promise for use in organic electronics, with deep energy levels and low bandgaps. The two‐directional Knoevenagel condensation used demonstrates the versatility of DPID as a useful yet underexploited conjugated unit. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Combining renewable gum rosin and lignin: Towards hydrophobic polymer composites by controlled polymerization

Rosin polymer–grafted lignin composites were prepared via “grafting from” atom transfer radical polymerization (ATRP) with the aid of 2‐bromoisobutyryl ester‐modified lignin as macroinitiators. Three different monomers derived from dehydroabietic acid (DA) were used for execution of grafting from ATRP, while DA was separately attached onto lignin by a simple esterification reaction. Kinetic studies indicated controlled and “living” characteristics of all monomer polymerizations. Thermal studies indicated that rosin polymer–grafted lignin composites exhibited glass transition temperatures in a broad temperature range from ～20 to 100°C. The grafting of both DA and rosin polymers significantly enhanced hydrophobicity of lignin. Static contact angle measurement of water droplets showed ～90° for all these rosin modified lignin composites. X‐ray photoelectron spectroscopy demonstrated that the surface of rosin–lignin composites was dominated with chemical compositions originating from the hydrocarbon rich rosin moiety. The impartation of hydrophobicity of rosin into lignin provided excellent water resistance of this class of renewable polymers, as all rosin‐modified lignin composites showed water uptake below 1.0 wt %. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Novel perfluorocyclobutyl aryl ether‐based well‐defined amphiphilic block copolymer

A series of fluorine‐containing amphiphilic diblock copolymers comprising hydrophobic poly(p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)phenyl methacrylate) (PTPFCBPMA) and hydrophilic poly(2‐(diethylamino)ethyl methacrylate) (PDEAEMA) segments were synthesized via successive reversible addition fragmentation chain transfer (RAFT) polymerizations. RAFT homopolymerization of p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)phenyl methacrylate was first initiated by 2,2′‐azobisisobutyronitrile using cumyl dithiobenzoate as chain transfer agent, and the results show that the procedure was conducted in a controlled way as confirmed by the fact that the number‐average molecular weights increased linearly with the conversions of the monomer while the polydispersity indices kept below 1.30. Dithiobenzoate‐capped PTPFCHPMA homopolymer was then used as macro‐RAFT agent to mediate RAFT polymerization of 2‐(diethylamino)ethyl methacrylate, which afforded PTPFCBPMA‐b‐PDEAEMA amphiphilic diblock copolymers with different block lengths and narrow molecular weight distributions (M_w/M_n ≤ 1.28). The critical micelle concentrations of the obtained amphiphilic diblock copolymers were determined by fluorescence spectroscopy technique using N‐phenyl‐1‐naphthylamine as probe. The morphology and size of the formed micelles were investigated by transmission electron microscopy and dynamic light scattering, respectively. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Palladium(II)-catalyzed oxidative Heck coupling of thiazole-4-carboxylates

Oxidative Heck coupling of thiazole-4-carboxylates via palladium(II)-catalyzed C-H bond activation has been achieved in moderate to good yields. No ligand, and no acidic additive were used in the reaction. The results showed that this protocol tolerated a series of substitutions on the thiazole ring. A preliminary attempt of direct arylation with p-xylene via Pd(II)-catalyzed C-H bond activation has also been done.     

Finite-time lag synchronization of coupled reaction–diffusion systems with time-varying delay via periodically intermittent control

In this paper, the issue of finite-time lag synchronization of coupled reaction–diffusion systems with time-varying delay (CRDSTD) is considered. A periodically intermittent controller is designed such that drive system and corresponding response system can achieve finite-time lag synchronization. By using graph theory and Lyapunov method, two sufficient criteria are presented to guarantee the finite-time lag synchronization of CRDSTD. Moreover, the time of achieving lag synchronization of CRDSTD is estimated. Finally, a numerical example is given to show the effectiveness of the proposed results.     

A 4-Methylumbelliferone-based Fluorescent Probe for Sodium New Houttuyfonate

A new fluorogenic probe for sodium new houttuyfonate (SNH) was proposed. 4‐Methylumbelliferyl‐2,4‐dinitrobenzenesulfonate (4‐MUDNBS) was a nonfluorescent compound and was synthesized via the one‐step reaction of 4‐methylumbelliferone (4‐MU) with 2,4‐dinitrobenzenesulfonyl chloride. In basic media, SNH was decomposed to produce sodium sulfite, which then reacted with 4‐MUDNBS to yield highly fluorescent 4‐MU, hence leading to the fluorescence increase of the reaction solution. A linear correlation existed between the emission intensity and the concentration of SNH within the range from 0.5 to 15 μg·mL⁻¹ with a detection limit of 0.15 μg· mL⁻¹ (3δ). The effect of substituents on the benzenesulfonyl moiety of the probe is discussed, and the presence of electronegative groups is favorable for the proposed cleavage reaction.     

Electrogenerated chemiluminescence of poly[(2,2′-bipyridyl)(4-(2-pyrrol-1-ylethyl)-4′-methyl-2,2′-bipyridyl)2]ruthenium (II) film

Elelctrogenerated chemiluminescence (ECL) of electropolymerized films based on [(2,2′-bipyridyl)(4-(2-pyrrol-1-ylethyl)-4′-methyl-2,2′-bipyridyl)₂]ruthenium (II) was firstly investigated in both organic and aqueous solution. The ECL behaviors have been explained by two typical mechanisms, namely, redox-cycling type and oxidative-reduction type. For the former, no co-reactant was required and for the latter, tripropylamine (TPA) and (NH₄)₂C₂O₄ were selected as co-reactants in the organic and aqueous system, respectively.